public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Danilo Krummrich <danilokrummrich@dk-develop.de>
To: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: linus.walleij@linaro.org,
	Danilo Krummrich <danilokrummrich@dk-develop.de>
Subject: [PATCH 1/4] input: ps2-gpio: refactor struct ps2_gpio_data
Date: Tue, 15 Feb 2022 17:02:05 +0100	[thread overview]
Message-ID: <20220215160208.34826-2-danilokrummrich@dk-develop.de> (raw)
In-Reply-To: <20220215160208.34826-1-danilokrummrich@dk-develop.de>

Refactor struct ps2_gpio_data in order to clearly separate RX and TX
state data.

This change intends to increase code readability and does not bring any
functional change.

Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
---
 drivers/input/serio/ps2-gpio.c | 70 ++++++++++++++++++++--------------
 1 file changed, 41 insertions(+), 29 deletions(-)

diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
index 8970b49ea09a..5f68505dd473 100644
--- a/drivers/input/serio/ps2-gpio.c
+++ b/drivers/input/serio/ps2-gpio.c
@@ -52,13 +52,17 @@ struct ps2_gpio_data {
 	struct gpio_desc *gpio_data;
 	bool write_enable;
 	int irq;
-	unsigned char rx_cnt;
-	unsigned char rx_byte;
-	unsigned char tx_cnt;
-	unsigned char tx_byte;
-	struct completion tx_done;
-	struct mutex tx_mutex;
-	struct delayed_work tx_work;
+	struct ps2_gpio_data_rx {
+		unsigned char cnt;
+		unsigned char byte;
+	} rx;
+	struct ps2_gpio_data_tx {
+		unsigned char cnt;
+		unsigned char byte;
+		struct completion complete;
+		struct mutex mutex;
+		struct delayed_work work;
+	} tx;
 };
 
 static int ps2_gpio_open(struct serio *serio)
@@ -73,7 +77,7 @@ static void ps2_gpio_close(struct serio *serio)
 {
 	struct ps2_gpio_data *drvdata = serio->port_data;
 
-	flush_delayed_work(&drvdata->tx_work);
+	flush_delayed_work(&drvdata->tx.work);
 	disable_irq(drvdata->irq);
 }
 
@@ -85,9 +89,9 @@ static int __ps2_gpio_write(struct serio *serio, unsigned char val)
 	gpiod_direction_output(drvdata->gpio_clk, 0);
 
 	drvdata->mode = PS2_MODE_TX;
-	drvdata->tx_byte = val;
+	drvdata->tx.byte = val;
 
-	schedule_delayed_work(&drvdata->tx_work, usecs_to_jiffies(200));
+	schedule_delayed_work(&drvdata->tx.work, usecs_to_jiffies(200));
 
 	return 0;
 }
@@ -98,12 +102,12 @@ static int ps2_gpio_write(struct serio *serio, unsigned char val)
 	int ret = 0;
 
 	if (in_task()) {
-		mutex_lock(&drvdata->tx_mutex);
+		mutex_lock(&drvdata->tx.mutex);
 		__ps2_gpio_write(serio, val);
-		if (!wait_for_completion_timeout(&drvdata->tx_done,
+		if (!wait_for_completion_timeout(&drvdata->tx.complete,
 						 msecs_to_jiffies(10000)))
 			ret = SERIO_TIMEOUT;
-		mutex_unlock(&drvdata->tx_mutex);
+		mutex_unlock(&drvdata->tx.mutex);
 	} else {
 		__ps2_gpio_write(serio, val);
 	}
@@ -111,12 +115,20 @@ static int ps2_gpio_write(struct serio *serio, unsigned char val)
 	return ret;
 }
 
+static inline struct ps2_gpio_data *
+to_ps2_gpio_data(struct delayed_work *dwork)
+{
+	struct ps2_gpio_data_tx *txd = container_of(dwork,
+						    struct ps2_gpio_data_tx,
+						    work);
+
+	return container_of(txd, struct ps2_gpio_data, tx);
+}
+
 static void ps2_gpio_tx_work_fn(struct work_struct *work)
 {
 	struct delayed_work *dwork = to_delayed_work(work);
-	struct ps2_gpio_data *drvdata = container_of(dwork,
-						    struct ps2_gpio_data,
-						    tx_work);
+	struct ps2_gpio_data *drvdata = to_ps2_gpio_data(dwork);
 
 	enable_irq(drvdata->irq);
 	gpiod_direction_output(drvdata->gpio_data, 0);
@@ -130,8 +142,8 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
 	int rxflags = 0;
 	static unsigned long old_jiffies;
 
-	byte = drvdata->rx_byte;
-	cnt = drvdata->rx_cnt;
+	byte = drvdata->rx.byte;
+	cnt = drvdata->rx.cnt;
 
 	if (old_jiffies == 0)
 		old_jiffies = jiffies;
@@ -220,8 +232,8 @@ static irqreturn_t ps2_gpio_irq_rx(struct ps2_gpio_data *drvdata)
 	old_jiffies = 0;
 	__ps2_gpio_write(drvdata->serio, PS2_CMD_RESEND);
 end:
-	drvdata->rx_cnt = cnt;
-	drvdata->rx_byte = byte;
+	drvdata->rx.cnt = cnt;
+	drvdata->rx.byte = byte;
 	return IRQ_HANDLED;
 }
 
@@ -231,8 +243,8 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
 	int data;
 	static unsigned long old_jiffies;
 
-	cnt = drvdata->tx_cnt;
-	byte = drvdata->tx_byte;
+	cnt = drvdata->tx.cnt;
+	byte = drvdata->tx.byte;
 
 	if (old_jiffies == 0)
 		old_jiffies = jiffies;
@@ -284,7 +296,7 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
 		}
 
 		drvdata->mode = PS2_MODE_RX;
-		complete(&drvdata->tx_done);
+		complete(&drvdata->tx.complete);
 
 		cnt = 1;
 		old_jiffies = 0;
@@ -305,9 +317,9 @@ static irqreturn_t ps2_gpio_irq_tx(struct ps2_gpio_data *drvdata)
 	cnt = 1;
 	old_jiffies = 0;
 	gpiod_direction_input(drvdata->gpio_data);
-	__ps2_gpio_write(drvdata->serio, drvdata->tx_byte);
+	__ps2_gpio_write(drvdata->serio, drvdata->tx.byte);
 end:
-	drvdata->tx_cnt = cnt;
+	drvdata->tx.cnt = cnt;
 	return IRQ_HANDLED;
 }
 
@@ -403,11 +415,11 @@ static int ps2_gpio_probe(struct platform_device *pdev)
 	/* Tx count always starts at 1, as the start bit is sent implicitly by
 	 * host-to-device communication initialization.
 	 */
-	drvdata->tx_cnt = 1;
+	drvdata->tx.cnt = 1;
 
-	INIT_DELAYED_WORK(&drvdata->tx_work, ps2_gpio_tx_work_fn);
-	init_completion(&drvdata->tx_done);
-	mutex_init(&drvdata->tx_mutex);
+	INIT_DELAYED_WORK(&drvdata->tx.work, ps2_gpio_tx_work_fn);
+	init_completion(&drvdata->tx.complete);
+	mutex_init(&drvdata->tx.mutex);
 
 	serio_register_port(serio);
 	platform_set_drvdata(pdev, drvdata);
-- 
2.35.1


  reply	other threads:[~2022-02-15 16:02 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-15 16:02 ps2-gpio: use ktime for IRQ timekeeping Danilo Krummrich
2022-02-15 16:02 ` Danilo Krummrich [this message]
2022-02-15 21:54   ` [PATCH 1/4] input: ps2-gpio: refactor struct ps2_gpio_data Dmitry Torokhov
2022-02-15 22:23     ` Danilo Krummrich
2022-02-15 22:38       ` Dmitry Torokhov
2022-02-15 16:02 ` [PATCH 2/4] input: ps2-gpio: use ktime for IRQ timekeeping Danilo Krummrich
2022-02-15 16:02 ` [PATCH 3/4] input: ps2-gpio: remove tx timeout from ps2_gpio_irq_tx() Danilo Krummrich
2022-02-15 16:02 ` [PATCH 4/4] input: ps2-gpio: don't send rx data before the stop bit Danilo Krummrich
2022-02-15 22:56 ` ps2-gpio: use ktime for IRQ timekeeping Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220215160208.34826-2-danilokrummrich@dk-develop.de \
    --to=danilokrummrich@dk-develop.de \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox