[PATCH 2/7] hwmon: (dell-smm) Add additional fan mode command combination

[Armin Wolf <W_Armin@gmx.de>]

This data was retrieved from the dellfan utility
(https://github.com/clopez/dellfan).
The combination is currently not used by default
on any models, but users can still select it for
testing purposes.

Tested on a Dell Insprion 3505.

Signed-off-by: Armin Wolf <W_Armin@gmx.de>
---
 Documentation/hwmon/dell-smm-hwmon.rst | 7 ++++---
 drivers/hwmon/dell-smm-hwmon.c         | 5 +++++
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
index 564d99cda869..cfaee682a245 100644
--- a/Documentation/hwmon/dell-smm-hwmon.rst
+++ b/Documentation/hwmon/dell-smm-hwmon.rst
@@ -68,14 +68,15 @@ laptops actually work for yours as well, or that you have to discover
 new codes.

 As a first step, you can load the module with the module parameter
-``fan_mode_method`` set to 1 to test if your hardware works with
-an already know method for disabling automatic BIOS fan control.
+``fan_mode_method`` set to 1 or 2 to test if your hardware works with
+already know methods for disabling automatic BIOS fan control.
 If ``pwm1_enable`` is now present and works (i.e., you can
 manually control the fan speed), then please submit your finding
 as a kernel patch, so that other users can benefit from it.
 Just add your model to the list ``i8k_whitelist_fan_control`` in
 file ``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree and use
-the already known code pair.
+the already known code pairs (number of method equals the number of
+entry in ``i8k_fan_controls``).
 Please read
 :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
 for information on submitting patches.
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index 1c4cc516c8b2..3b49e55d060f 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1182,10 +1182,15 @@ struct i8k_fan_control_data {
 };

 enum i8k_fan_controls {
+	I8K_FAN_30A3_31A3,
 	I8K_FAN_34A3_35A3,
 };

 static const struct i8k_fan_control_data i8k_fan_control_data[] __initconst = {
+	[I8K_FAN_30A3_31A3] = {
+		.manual_fan = 0x30a3,
+		.auto_fan = 0x31a3,
+	},
 	[I8K_FAN_34A3_35A3] = {
 		.manual_fan = 0x34a3,
 		.auto_fan = 0x35a3,
--
2.30.2