From: Guenter Roeck <linux@roeck-us.net>
To: Armin Wolf <W_Armin@gmx.de>
Cc: pali@kernel.org, jdelvare@suse.com, linux-hwmon@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/7] hwmon: (dell-smm) Make fan/temp sensor number a u8
Date: Sat, 19 Feb 2022 06:47:41 -0800 [thread overview]
Message-ID: <20220219144741.GA1032777@roeck-us.net> (raw)
In-Reply-To: <20220215191113.16640-4-W_Armin@gmx.de>
On Tue, Feb 15, 2022 at 08:11:09PM +0100, Armin Wolf wrote:
> Right now, we only use bits 0 to 7 of the fan/temp sensor number
> by doing number & 0xff. Passing the value as a u8 makes this
> step unnecessary. Also add checks to the ioctl handler since
> users might get confused when passing 0x00000101 does the same
> as passing 0x00000001.
>
> Tested on a Dell Inspiron 3505.
>
> Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> Reviewed-by: Pali Rohár <pali@kernel.org>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/dell-smm-hwmon.c | 68 ++++++++++++++++++++++------------
> 1 file changed, 45 insertions(+), 23 deletions(-)
>
> --
> 2.30.2
>
> diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> index 3b49e55d060f..a102034a1d38 100644
> --- a/drivers/hwmon/dell-smm-hwmon.c
> +++ b/drivers/hwmon/dell-smm-hwmon.c
> @@ -21,6 +21,7 @@
> #include <linux/errno.h>
> #include <linux/hwmon.h>
> #include <linux/init.h>
> +#include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> @@ -254,46 +255,52 @@ static int i8k_smm(struct smm_regs *regs)
> /*
> * Read the fan status.
> */
> -static int i8k_get_fan_status(const struct dell_smm_data *data, int fan)
> +static int i8k_get_fan_status(const struct dell_smm_data *data, u8 fan)
> {
> - struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, };
> + struct smm_regs regs = {
> + .eax = I8K_SMM_GET_FAN,
> + .ebx = fan,
> + };
>
> if (data->disallow_fan_support)
> return -EINVAL;
>
> - regs.ebx = fan & 0xff;
> return i8k_smm(®s) ? : regs.eax & 0xff;
> }
>
> /*
> * Read the fan speed in RPM.
> */
> -static int i8k_get_fan_speed(const struct dell_smm_data *data, int fan)
> +static int i8k_get_fan_speed(const struct dell_smm_data *data, u8 fan)
> {
> - struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, };
> + struct smm_regs regs = {
> + .eax = I8K_SMM_GET_SPEED,
> + .ebx = fan,
> + };
>
> if (data->disallow_fan_support)
> return -EINVAL;
>
> - regs.ebx = fan & 0xff;
> return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult;
> }
>
> /*
> * Read the fan type.
> */
> -static int _i8k_get_fan_type(const struct dell_smm_data *data, int fan)
> +static int _i8k_get_fan_type(const struct dell_smm_data *data, u8 fan)
> {
> - struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, };
> + struct smm_regs regs = {
> + .eax = I8K_SMM_GET_FAN_TYPE,
> + .ebx = fan,
> + };
>
> if (data->disallow_fan_support || data->disallow_fan_type_call)
> return -EINVAL;
>
> - regs.ebx = fan & 0xff;
> return i8k_smm(®s) ? : regs.eax & 0xff;
> }
>
> -static int i8k_get_fan_type(struct dell_smm_data *data, int fan)
> +static int i8k_get_fan_type(struct dell_smm_data *data, u8 fan)
> {
> /* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */
> if (data->fan_type[fan] == INT_MIN)
> @@ -305,14 +312,16 @@ static int i8k_get_fan_type(struct dell_smm_data *data, int fan)
> /*
> * Read the fan nominal rpm for specific fan speed.
> */
> -static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, int fan, int speed)
> +static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, u8 fan, int speed)
> {
> - struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, };
> + struct smm_regs regs = {
> + .eax = I8K_SMM_GET_NOM_SPEED,
> + .ebx = fan | (speed << 8),
> + };
>
> if (data->disallow_fan_support)
> return -EINVAL;
>
> - regs.ebx = (fan & 0xff) | (speed << 8);
> return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult;
> }
>
> @@ -333,7 +342,7 @@ static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enabl
> /*
> * Set the fan speed (off, low, high, ...).
> */
> -static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed)
> +static int i8k_set_fan(const struct dell_smm_data *data, u8 fan, int speed)
> {
> struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, };
>
> @@ -341,33 +350,35 @@ static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed)
> return -EINVAL;
>
> speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed);
> - regs.ebx = (fan & 0xff) | (speed << 8);
> + regs.ebx = fan | (speed << 8);
>
> return i8k_smm(®s);
> }
>
> -static int __init i8k_get_temp_type(int sensor)
> +static int __init i8k_get_temp_type(u8 sensor)
> {
> - struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, };
> + struct smm_regs regs = {
> + .eax = I8K_SMM_GET_TEMP_TYPE,
> + .ebx = sensor,
> + };
>
> - regs.ebx = sensor & 0xff;
> return i8k_smm(®s) ? : regs.eax & 0xff;
> }
>
> /*
> * Read the cpu temperature.
> */
> -static int _i8k_get_temp(int sensor)
> +static int _i8k_get_temp(u8 sensor)
> {
> struct smm_regs regs = {
> .eax = I8K_SMM_GET_TEMP,
> - .ebx = sensor & 0xff,
> + .ebx = sensor,
> };
>
> return i8k_smm(®s) ? : regs.eax & 0xff;
> }
>
> -static int i8k_get_temp(int sensor)
> +static int i8k_get_temp(u8 sensor)
> {
> int temp = _i8k_get_temp(sensor);
>
> @@ -500,6 +511,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> if (copy_from_user(&val, argp, sizeof(int)))
> return -EFAULT;
>
> + if (val > U8_MAX || val < 0)
> + return -EINVAL;
> +
> val = i8k_get_fan_speed(data, val);
> break;
>
> @@ -507,6 +521,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> if (copy_from_user(&val, argp, sizeof(int)))
> return -EFAULT;
>
> + if (val > U8_MAX || val < 0)
> + return -EINVAL;
> +
> val = i8k_get_fan_status(data, val);
> break;
>
> @@ -517,6 +534,9 @@ static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
> if (copy_from_user(&val, argp, sizeof(int)))
> return -EFAULT;
>
> + if (val > U8_MAX || val < 0)
> + return -EINVAL;
> +
> if (copy_from_user(&speed, argp + 1, sizeof(int)))
> return -EFAULT;
>
> @@ -924,7 +944,8 @@ static int __init dell_smm_init_hwmon(struct device *dev)
> {
> struct dell_smm_data *data = dev_get_drvdata(dev);
> struct device *dell_smm_hwmon_dev;
> - int i, state, err;
> + int state, err;
> + u8 i;
>
> for (i = 0; i < DELL_SMM_NO_TEMP; i++) {
> data->temp_type[i] = i8k_get_temp_type(i);
> @@ -1245,7 +1266,8 @@ static int __init dell_smm_probe(struct platform_device *pdev)
> {
> struct dell_smm_data *data;
> const struct dmi_system_id *id, *fan_control;
> - int fan, ret;
> + int ret;
> + u8 fan;
>
> data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL);
> if (!data)
next prev parent reply other threads:[~2022-02-19 14:47 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-15 19:11 [PATCH 0/7] hwmon: (dell-smm) Miscellaneous improvements Armin Wolf
2022-02-15 19:11 ` [PATCH 1/7] hwmon: (dell-smm) Allow for specifying fan control method as module parameter Armin Wolf
2022-02-15 19:19 ` Pali Rohár
2022-02-15 19:45 ` Armin Wolf
[not found] ` <a450a2b6-92d3-d2cd-db63-b578480ff385@gmx.de>
2022-02-15 19:49 ` Pali Rohár
2022-02-15 20:19 ` Armin Wolf
2022-02-15 20:31 ` Pali Rohár
2022-02-15 21:00 ` Armin Wolf
2022-02-15 19:11 ` [PATCH 2/7] hwmon: (dell-smm) Add additional fan mode command combination Armin Wolf
2022-02-15 19:11 ` [PATCH 3/7] hwmon: (dell-smm) Make fan/temp sensor number a u8 Armin Wolf
2022-02-15 19:37 ` Pali Rohár
2022-02-19 14:47 ` Guenter Roeck [this message]
2022-02-15 19:11 ` [PATCH 4/7] hwmon: (dell-smm) Improve temperature sensors detection Armin Wolf
2022-02-19 14:51 ` Guenter Roeck
2022-02-15 19:11 ` [PATCH 5/7] hwmon: (dell-smm) Improve assembly code Armin Wolf
2022-02-16 0:09 ` kernel test robot
2022-02-15 19:11 ` [PATCH 6/7] hwmon: (dell-smm) Add SMM interface documentation Armin Wolf
2022-02-15 19:34 ` Pali Rohár
2022-02-19 14:46 ` Guenter Roeck
2022-02-15 19:11 ` [PATCH 7/7] hwmon: (dell-smm) Reword and mark parameter "force" as unsafe Armin Wolf
2022-02-15 19:35 ` Pali Rohár
2022-02-19 14:43 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220219144741.GA1032777@roeck-us.net \
--to=linux@roeck-us.net \
--cc=W_Armin@gmx.de \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox