From: Yuntao Wang <ytcoode@gmail.com>
To: bpf@vger.kernel.org
Cc: "Alexei Starovoitov" <ast@kernel.org>,
"Daniel Borkmann" <daniel@iogearbox.net>,
"Andrii Nakryiko" <andrii@kernel.org>,
"Martin KaFai Lau" <kafai@fb.com>,
"Song Liu" <songliubraving@fb.com>, "Yonghong Song" <yhs@fb.com>,
"John Fastabend" <john.fastabend@gmail.com>,
"KP Singh" <kpsingh@kernel.org>,
"Quentin Monnet" <quentin@isovalent.com>,
"Jean-Philippe Brucker" <jean-philippe@linaro.org>,
"Mauricio Vásquez" <mauricio@kinvolk.io>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Yuntao Wang" <ytcoode@gmail.com>
Subject: [PATCH bpf-next] bpftool: Remove redundant slashes
Date: Sat, 26 Feb 2022 00:15:07 +0800 [thread overview]
Message-ID: <20220225161507.470763-1-ytcoode@gmail.com> (raw)
Since the _OUTPUT variable holds a value ending with a trailing slash,
there is no need to add another one when defining BOOTSTRAP_OUTPUT and
LIBBPF_OUTPUT variables.
When defining LIBBPF_INCLUDE and LIBBPF_BOOTSTRAP_INCLUDE, we shouldn't
add an extra slash either for the same reason.
When building libbpf, the value of the DESTDIR argument should also not
end with a trailing slash.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
---
tools/bpf/bpftool/Makefile | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index ba647aede0d6..9800f966fd51 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -18,19 +18,19 @@ BPF_DIR = $(srctree)/tools/lib/bpf
ifneq ($(OUTPUT),)
_OUTPUT := $(OUTPUT)
else
- _OUTPUT := $(CURDIR)
+ _OUTPUT := $(CURDIR)/
endif
-BOOTSTRAP_OUTPUT := $(_OUTPUT)/bootstrap/
+BOOTSTRAP_OUTPUT := $(_OUTPUT)bootstrap/
-LIBBPF_OUTPUT := $(_OUTPUT)/libbpf/
+LIBBPF_OUTPUT := $(_OUTPUT)libbpf/
LIBBPF_DESTDIR := $(LIBBPF_OUTPUT)
-LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)/include
+LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)include
LIBBPF_HDRS_DIR := $(LIBBPF_INCLUDE)/bpf
LIBBPF := $(LIBBPF_OUTPUT)libbpf.a
LIBBPF_BOOTSTRAP_OUTPUT := $(BOOTSTRAP_OUTPUT)libbpf/
LIBBPF_BOOTSTRAP_DESTDIR := $(LIBBPF_BOOTSTRAP_OUTPUT)
-LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)/include
+LIBBPF_BOOTSTRAP_INCLUDE := $(LIBBPF_BOOTSTRAP_DESTDIR)include
LIBBPF_BOOTSTRAP_HDRS_DIR := $(LIBBPF_BOOTSTRAP_INCLUDE)/bpf
LIBBPF_BOOTSTRAP := $(LIBBPF_BOOTSTRAP_OUTPUT)libbpf.a
@@ -44,7 +44,7 @@ $(LIBBPF_OUTPUT) $(BOOTSTRAP_OUTPUT) $(LIBBPF_BOOTSTRAP_OUTPUT) $(LIBBPF_HDRS_DI
$(LIBBPF): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) \
- DESTDIR=$(LIBBPF_DESTDIR) prefix= $(LIBBPF) install_headers
+ DESTDIR=$(LIBBPF_DESTDIR:/=) prefix= $(LIBBPF) install_headers
$(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_DIR)
$(call QUIET_INSTALL, $@)
@@ -52,7 +52,7 @@ $(LIBBPF_INTERNAL_HDRS): $(LIBBPF_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_HDRS_
$(LIBBPF_BOOTSTRAP): $(wildcard $(BPF_DIR)/*.[ch] $(BPF_DIR)/Makefile) | $(LIBBPF_BOOTSTRAP_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_BOOTSTRAP_OUTPUT) \
- DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR) prefix= \
+ DESTDIR=$(LIBBPF_BOOTSTRAP_DESTDIR:/=) prefix= \
ARCH= CROSS_COMPILE= CC=$(HOSTCC) LD=$(HOSTLD) $@ install_headers
$(LIBBPF_BOOTSTRAP_INTERNAL_HDRS): $(LIBBPF_BOOTSTRAP_HDRS_DIR)/%.h: $(BPF_DIR)/%.h | $(LIBBPF_BOOTSTRAP_HDRS_DIR)
--
2.35.1
next reply other threads:[~2022-02-25 16:15 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-25 16:15 Yuntao Wang [this message]
2022-02-25 16:38 ` [PATCH bpf-next] bpftool: Remove redundant slashes Quentin Monnet
2022-02-26 6:09 ` Song Liu
2022-02-26 16:38 ` [PATCH bpf-next v2] " Yuntao Wang
2022-02-28 15:20 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220225161507.470763-1-ytcoode@gmail.com \
--to=ytcoode@gmail.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=jean-philippe@linaro.org \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=kpsingh@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mauricio@kinvolk.io \
--cc=netdev@vger.kernel.org \
--cc=quentin@isovalent.com \
--cc=songliubraving@fb.com \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox