From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Tao Liu <thomas.liu@ucloud.cn>,
Willem de Bruijn <willemb@google.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 4.9 10/29] gso: do not skip outer ip header in case of ipip and net_failover
Date: Mon, 28 Feb 2022 18:23:37 +0100 [thread overview]
Message-ID: <20220228172142.482484537@linuxfoundation.org> (raw)
In-Reply-To: <20220228172141.744228435@linuxfoundation.org>
From: Tao Liu <thomas.liu@ucloud.cn>
commit cc20cced0598d9a5ff91ae4ab147b3b5e99ee819 upstream.
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a70b ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/af_inet.c | 5 ++++-
net/ipv6/ip6_offload.c | 2 ++
2 files changed, 6 insertions(+), 1 deletion(-)
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1238,8 +1238,11 @@ struct sk_buff *inet_gso_segment(struct
}
ops = rcu_dereference(inet_offloads[proto]);
- if (likely(ops && ops->callbacks.gso_segment))
+ if (likely(ops && ops->callbacks.gso_segment)) {
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
+ }
if (IS_ERR_OR_NULL(segs))
goto out;
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -96,6 +96,8 @@ static struct sk_buff *ipv6_gso_segment(
if (likely(ops && ops->callbacks.gso_segment)) {
skb_reset_transport_header(skb);
segs = ops->callbacks.gso_segment(skb, features);
+ if (!segs)
+ skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
}
if (IS_ERR_OR_NULL(segs))
next prev parent reply other threads:[~2022-02-28 17:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-28 17:23 [PATCH 4.9 00/29] 4.9.304-rc1 review Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 01/29] mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC status Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 02/29] vhost/vsock: dont check owner in vhost_vsock_stop() while releasing Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 03/29] parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 04/29] parisc/unaligned: Fix ldw() and stw() unalignment handlers Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 05/29] sr9700: sanity check for packet length Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 06/29] USB: zaurus: support another broken Zaurus Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 07/29] serial: 8250: fix error handling in of_platform_serial_probe() Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 08/29] serial: 8250: of: Fix mapped region size when using reg-offset property Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 09/29] net: __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends Greg Kroah-Hartman
2022-02-28 17:23 ` Greg Kroah-Hartman [this message]
2022-02-28 17:23 ` [PATCH 4.9 11/29] openvswitch: Fix setting ipv6 fields causing hw csum failure Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 12/29] drm/edid: Always set RGB444 Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 13/29] net/mlx5e: Fix wrong return value on ioctl EEPROM query failure Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 14/29] configfs: fix a race in configfs_{,un}register_subsystem() Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 15/29] RDMA/ib_srp: Fix a deadlock Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 16/29] iio: adc: men_z188_adc: Fix a resource leak in an error handling path Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 17/29] ata: pata_hpt37x: disable primary channel on HPT371 Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 18/29] Revert "USB: serial: ch341: add new Product ID for CH341A" Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 19/29] usb: gadget: rndis: add spinlock for rndis response list Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 20/29] USB: gadget: validate endpoint index for xilinx udc Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 21/29] tracefs: Set the group ownership in apply_options() not parse_options() Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 22/29] USB: serial: option: add support for DW5829e Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 23/29] USB: serial: option: add Telit LE910R1 compositions Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 24/29] usb: dwc3: gadget: Let the interrupt handler disable bottom halves Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 25/29] xhci: Prevent futile URB re-submissions due to incorrect return value Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 26/29] tty: n_gsm: fix encoding of control signal octet bit DV Greg Kroah-Hartman
2022-03-02 21:01 ` Pavel Machek
2022-02-28 17:23 ` [PATCH 4.9 27/29] tty: n_gsm: fix proper link termination after failed open Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 28/29] memblock: use kfree() to release kmalloced memblock regions Greg Kroah-Hartman
2022-02-28 17:23 ` [PATCH 4.9 29/29] fget: clarify and improve __fget_files() implementation Greg Kroah-Hartman
2022-02-28 21:24 ` [PATCH 4.9 00/29] 4.9.304-rc1 review Florian Fainelli
2022-02-28 21:43 ` Shuah Khan
2022-03-01 17:06 ` Naresh Kamboju
2022-03-01 19:09 ` Guenter Roeck
2022-03-01 19:35 ` Slade Watkins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220228172142.482484537@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thomas.liu@ucloud.cn \
--cc=willemb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox