public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Youghandhar Chintala <youghand@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	pillair@codeaurora.org, dianders@chromium.org,
	kuabhs@chromium.org, briannorris@chromium.org,
	mpubbise@codeaurora.org,
	Youghandhar Chintala <youghand@codeaurora.org>
Subject: [PATCH v5 2/2] ath10k: Trigger sta disconnect on hardware restart
Date: Tue,  8 Mar 2022 17:23:25 +0530	[thread overview]
Message-ID: <20220308115325.5246-3-youghand@codeaurora.org> (raw)
In-Reply-To: <20220308115325.5246-1-youghand@codeaurora.org>

Currently after the hardware restart triggered from the driver,
the station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.

After the target restart, its wifi mac sequence number gets
reset to zero. Hence AP to which our device is connected will receive
frames with a  wifi mac sequence number jump to the past, thereby
resulting in the AP dropping all these frames, until the frame
arrives with a wifi mac sequence number which AP was expecting.

To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9e1f483e1362..2092bfd02cd1 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -94,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -131,6 +132,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -169,6 +171,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -202,6 +205,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.bmi_large_size_download = true,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -239,6 +243,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -276,6 +281,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -313,6 +319,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -354,6 +361,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.tx_stats_over_pktlog = false,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -397,6 +405,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -447,6 +456,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -494,6 +504,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -531,6 +542,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -570,6 +582,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -600,6 +613,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin_workaround = true,
 		.credit_size_workaround = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -644,6 +658,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -674,6 +689,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = true,
 	},
 };
 
@@ -2442,6 +2458,7 @@ EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
 static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
+	struct ath10k_vif *arvif;
 	int ret;
 
 	set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
@@ -2480,6 +2497,14 @@ static void ath10k_core_restart(struct work_struct *work)
 		ar->state = ATH10K_STATE_RESTARTING;
 		ath10k_halt(ar);
 		ath10k_scan_finish(ar);
+		if (ar->hw_params.hw_restart_disconnect) {
+			list_for_each_entry(arvif, &ar->arvifs, list) {
+				if (arvif->is_up &&
+				    arvif->vdev_type == WMI_VDEV_TYPE_STA)
+					ieee80211_hw_restart_disconnect(arvif->vif);
+			}
+		}
+
 		ieee80211_restart_hw(ar->hw);
 		break;
 	case ATH10K_STATE_OFF:
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5215a6816d71..93acf0dd580a 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -633,6 +633,8 @@ struct ath10k_hw_params {
 	bool supports_peer_stats_info;
 
 	bool dynamic_sar_support;
+
+	bool hw_restart_disconnect;
 };
 
 struct htt_resp;
-- 
2.29.0


  parent reply	other threads:[~2022-03-08 11:53 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-08 11:53 [PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart Youghandhar Chintala
2022-03-08 11:53 ` [PATCH v5 1/2] mac80211: Add support to trigger sta disconnect on " Youghandhar Chintala
2022-03-08 11:53 ` Youghandhar Chintala [this message]
2022-03-08 18:13 ` [PATCH v5 0/2] mac80211: Trigger disconnect for STA during target " Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220308115325.5246-3-youghand@codeaurora.org \
    --to=youghand@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=briannorris@chromium.org \
    --cc=dianders@chromium.org \
    --cc=kuabhs@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mpubbise@codeaurora.org \
    --cc=pillair@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox