[PATCH 5.15 24/32] iavf: Fix hang during reboot/shutdown

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit b04683ff8f0823b869c219c78ba0d974bddea0b5 ]

Recent commit 974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.

The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).

Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot

[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot          state:D stack:    0 pid:17359 ppid:     1 f2
[52625.996732] Call Trace:
[52625.999187]  __schedule+0x2d1/0x830
[52626.007400]  schedule+0x35/0xa0
[52626.010545]  schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046]  usleep_range+0x5b/0x80
[52626.023540]  iavf_remove+0x63/0x5b0 [iavf]
[52626.027645]  pci_device_remove+0x3b/0xc0
[52626.031572]  device_release_driver_internal+0x103/0x1f0
[52626.036805]  pci_stop_bus_device+0x72/0xa0
[52626.040904]  pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870]  pci_iov_remove_virtfn+0xba/0x120
[52626.050232]  sriov_disable+0x2f/0xe0
[52626.053813]  ice_free_vfs+0x7c/0x340 [ice]
[52626.057946]  ice_remove+0x220/0x240 [ice]
[52626.061967]  ice_shutdown+0x16/0x50 [ice]
[52626.065987]  pci_device_shutdown+0x34/0x60
[52626.070086]  device_shutdown+0x165/0x1c5
[52626.074011]  kernel_restart+0xe/0x30
[52626.077593]  __do_sys_reboot+0x1d2/0x210
[52626.093815]  do_syscall_64+0x5b/0x1a0
[52626.097483]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 7fca9dd8dcf6..ca74824d40b8 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -4025,6 +4025,13 @@ static void iavf_remove(struct pci_dev *pdev)
 	struct iavf_hw *hw = &adapter->hw;
 	int err;
 
+	/* When reboot/shutdown is in progress no need to do anything
+	 * as the adapter is already REMOVE state that was set during
+	 * iavf_shutdown() callback.
+	 */
+	if (adapter->state == __IAVF_REMOVE)
+		return;
+
 	set_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section);
 	/* Wait until port initialization is complete.
 	 * There are flows where register/unregister netdev may race.
-- 
2.34.1