From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Dafna Hirschfeld <dhirschfeld@habana.ai>
Subject: [PATCH 4/7] habanalabs: remove debugfs read/write callbacks
Date: Fri, 1 Apr 2022 15:20:14 +0300 [thread overview]
Message-ID: <20220401122017.116205-4-ogabbay@kernel.org> (raw)
In-Reply-To: <20220401122017.116205-1-ogabbay@kernel.org>
From: Dafna Hirschfeld <dhirschfeld@habana.ai>
The debugfs memory access now uses the callback 'access_dev_mem'
so there is no use of the callbacks
'debugfs_{read32,read64,write32,write6}'. Remove them.
Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/common/habanalabs.h | 12 --
drivers/misc/habanalabs/gaudi/gaudi.c | 182 ----------------
drivers/misc/habanalabs/goya/goya.c | 222 +-------------------
3 files changed, 1 insertion(+), 415 deletions(-)
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 680e33694ca4..e9a64309e99f 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -1282,10 +1282,6 @@ struct fw_load_mgr {
* @update_eq_ci: update event queue CI.
* @context_switch: called upon ASID context switch.
* @restore_phase_topology: clear all SOBs amd MONs.
- * @debugfs_read32: debug interface for reading u32 from DRAM/SRAM/Host memory.
- * @debugfs_write32: debug interface for writing u32 to DRAM/SRAM/Host memory.
- * @debugfs_read64: debug interface for reading u64 from DRAM/SRAM/Host memory.
- * @debugfs_write64: debug interface for writing u64 to DRAM/SRAM/Host memory.
* @debugfs_read_dma: debug interface for reading up to 2MB from the device's
* internal memory via DMA engine.
* @add_device_attr: add ASIC specific device attributes.
@@ -1409,14 +1405,6 @@ struct hl_asic_funcs {
void (*update_eq_ci)(struct hl_device *hdev, u32 val);
int (*context_switch)(struct hl_device *hdev, u32 asid);
void (*restore_phase_topology)(struct hl_device *hdev);
- int (*debugfs_read32)(struct hl_device *hdev, u64 addr,
- bool user_address, u32 *val);
- int (*debugfs_write32)(struct hl_device *hdev, u64 addr,
- bool user_address, u32 val);
- int (*debugfs_read64)(struct hl_device *hdev, u64 addr,
- bool user_address, u64 *val);
- int (*debugfs_write64)(struct hl_device *hdev, u64 addr,
- bool user_address, u64 val);
int (*debugfs_read_dma)(struct hl_device *hdev, u64 addr, u32 size,
void *blob_addr);
void (*add_device_attr)(struct hl_device *hdev, struct attribute_group *dev_clk_attr_grp,
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 7ceec28bdeef..bacb2f1df81e 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -6104,184 +6104,6 @@ static void gaudi_restore_phase_topology(struct hl_device *hdev)
}
-static int gaudi_debugfs_read32(struct hl_device *hdev, u64 addr,
- bool user_address, u32 *val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 hbm_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr < CFG_BASE + CFG_SIZE)) {
-
- *val = RREG32(addr - CFG_BASE);
-
- } else if ((addr >= SRAM_BASE_ADDR) && (addr < SRAM_BASE_ADDR + SRAM_SIZE)) {
-
- *val = readl(hdev->pcie_bar[SRAM_BAR_ID] + (addr - SRAM_BASE_ADDR));
-
- } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE + (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, bar_base_addr);
-
- if (hbm_bar_addr != U64_MAX) {
- *val = readl(hdev->pcie_bar[HBM_BAR_ID] + (addr - bar_base_addr));
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, hbm_bar_addr);
- }
-
- if (hbm_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
-
- *val = *(u32 *) phys_to_virt(addr - HOST_PHYS_BASE);
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int gaudi_debugfs_write32(struct hl_device *hdev, u64 addr,
- bool user_address, u32 val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 hbm_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr < CFG_BASE + CFG_SIZE)) {
-
- WREG32(addr - CFG_BASE, val);
-
- } else if ((addr >= SRAM_BASE_ADDR) && (addr < SRAM_BASE_ADDR + SRAM_SIZE)) {
-
- writel(val, hdev->pcie_bar[SRAM_BAR_ID] + (addr - SRAM_BASE_ADDR));
-
- } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE + (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, bar_base_addr);
-
- if (hbm_bar_addr != U64_MAX) {
- writel(val, hdev->pcie_bar[HBM_BAR_ID] + (addr - bar_base_addr));
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, hbm_bar_addr);
- }
-
- if (hbm_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
-
- *(u32 *) phys_to_virt(addr - HOST_PHYS_BASE) = val;
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int gaudi_debugfs_read64(struct hl_device *hdev, u64 addr,
- bool user_address, u64 *val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 hbm_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
-
- u32 val_l = RREG32(addr - CFG_BASE);
- u32 val_h = RREG32(addr + sizeof(u32) - CFG_BASE);
-
- *val = (((u64) val_h) << 32) | val_l;
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
-
- *val = readq(hdev->pcie_bar[SRAM_BAR_ID] + (addr - SRAM_BASE_ADDR));
-
- } else if (addr <= DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE + (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, bar_base_addr);
-
- if (hbm_bar_addr != U64_MAX) {
- *val = readq(hdev->pcie_bar[HBM_BAR_ID] + (addr - bar_base_addr));
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, hbm_bar_addr);
- }
-
- if (hbm_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
-
- *val = *(u64 *) phys_to_virt(addr - HOST_PHYS_BASE);
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int gaudi_debugfs_write64(struct hl_device *hdev, u64 addr,
- bool user_address, u64 val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 hbm_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
-
- WREG32(addr - CFG_BASE, lower_32_bits(val));
- WREG32(addr + sizeof(u32) - CFG_BASE, upper_32_bits(val));
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
-
- writeq(val, hdev->pcie_bar[SRAM_BAR_ID] + (addr - SRAM_BASE_ADDR));
-
- } else if (addr <= DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE + (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, bar_base_addr);
-
- if (hbm_bar_addr != U64_MAX) {
- writeq(val, hdev->pcie_bar[HBM_BAR_ID] + (addr - bar_base_addr));
- hbm_bar_addr = gaudi_set_hbm_bar_base(hdev, hbm_bar_addr);
- }
-
- if (hbm_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
-
- *(u64 *) phys_to_virt(addr - HOST_PHYS_BASE) = val;
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
static int gaudi_dma_core_transfer(struct hl_device *hdev, int dma_id, u64 addr,
u32 size_to_dma, dma_addr_t dma_addr)
{
@@ -9450,10 +9272,6 @@ static const struct hl_asic_funcs gaudi_funcs = {
.update_eq_ci = gaudi_update_eq_ci,
.context_switch = gaudi_context_switch,
.restore_phase_topology = gaudi_restore_phase_topology,
- .debugfs_read32 = gaudi_debugfs_read32,
- .debugfs_write32 = gaudi_debugfs_write32,
- .debugfs_read64 = gaudi_debugfs_read64,
- .debugfs_write64 = gaudi_debugfs_write64,
.debugfs_read_dma = gaudi_debugfs_read_dma,
.add_device_attr = gaudi_add_device_attr,
.handle_eqe = gaudi_handle_eqe,
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index a5cca984b357..d75a180cf5bb 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -4262,223 +4262,7 @@ static void goya_clear_sm_regs(struct hl_device *hdev)
i = RREG32(mmSYNC_MNGR_SOB_OBJ_0);
}
-/*
- * goya_debugfs_read32 - read a 32bit value from a given device or a host mapped
- * address.
- *
- * @hdev: pointer to hl_device structure
- * @addr: device or host mapped address
- * @val: returned value
- *
- * In case of DDR address that is not mapped into the default aperture that
- * the DDR bar exposes, the function will configure the iATU so that the DDR
- * bar will be positioned at a base address that allows reading from the
- * required address. Configuring the iATU during normal operation can
- * lead to undefined behavior and therefore, should be done with extreme care
- *
- */
-static int goya_debugfs_read32(struct hl_device *hdev, u64 addr,
- bool user_address, u32 *val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 ddr_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr < CFG_BASE + CFG_SIZE)) {
- *val = RREG32(addr - CFG_BASE);
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr < SRAM_BASE_ADDR + SRAM_SIZE)) {
-
- *val = readl(hdev->pcie_bar[SRAM_CFG_BAR_ID] +
- (addr - SRAM_BASE_ADDR));
-
- } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE +
- (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
- if (ddr_bar_addr != U64_MAX) {
- *val = readl(hdev->pcie_bar[DDR_BAR_ID] +
- (addr - bar_base_addr));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev,
- ddr_bar_addr);
- }
- if (ddr_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
- *val = *(u32 *) phys_to_virt(addr - HOST_PHYS_BASE);
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-/*
- * goya_debugfs_write32 - write a 32bit value to a given device or a host mapped
- * address.
- *
- * @hdev: pointer to hl_device structure
- * @addr: device or host mapped address
- * @val: returned value
- *
- * In case of DDR address that is not mapped into the default aperture that
- * the DDR bar exposes, the function will configure the iATU so that the DDR
- * bar will be positioned at a base address that allows writing to the
- * required address. Configuring the iATU during normal operation can
- * lead to undefined behavior and therefore, should be done with extreme care
- *
- */
-static int goya_debugfs_write32(struct hl_device *hdev, u64 addr,
- bool user_address, u32 val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 ddr_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr < CFG_BASE + CFG_SIZE)) {
- WREG32(addr - CFG_BASE, val);
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr < SRAM_BASE_ADDR + SRAM_SIZE)) {
-
- writel(val, hdev->pcie_bar[SRAM_CFG_BAR_ID] +
- (addr - SRAM_BASE_ADDR));
-
- } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE +
- (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
- if (ddr_bar_addr != U64_MAX) {
- writel(val, hdev->pcie_bar[DDR_BAR_ID] +
- (addr - bar_base_addr));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev,
- ddr_bar_addr);
- }
- if (ddr_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
- *(u32 *) phys_to_virt(addr - HOST_PHYS_BASE) = val;
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int goya_debugfs_read64(struct hl_device *hdev, u64 addr,
- bool user_address, u64 *val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 ddr_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
- u32 val_l = RREG32(addr - CFG_BASE);
- u32 val_h = RREG32(addr + sizeof(u32) - CFG_BASE);
-
- *val = (((u64) val_h) << 32) | val_l;
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
-
- *val = readq(hdev->pcie_bar[SRAM_CFG_BAR_ID] +
- (addr - SRAM_BASE_ADDR));
-
- } else if (addr <=
- DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE +
- (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
- if (ddr_bar_addr != U64_MAX) {
- *val = readq(hdev->pcie_bar[DDR_BAR_ID] +
- (addr - bar_base_addr));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev,
- ddr_bar_addr);
- }
- if (ddr_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
- *val = *(u64 *) phys_to_virt(addr - HOST_PHYS_BASE);
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int goya_debugfs_write64(struct hl_device *hdev, u64 addr,
- bool user_address, u64 val)
-{
- struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 ddr_bar_addr, host_phys_end;
- int rc = 0;
-
- host_phys_end = HOST_PHYS_BASE + HOST_PHYS_SIZE;
-
- if ((addr >= CFG_BASE) && (addr <= CFG_BASE + CFG_SIZE - sizeof(u64))) {
- WREG32(addr - CFG_BASE, lower_32_bits(val));
- WREG32(addr + sizeof(u32) - CFG_BASE, upper_32_bits(val));
-
- } else if ((addr >= SRAM_BASE_ADDR) &&
- (addr <= SRAM_BASE_ADDR + SRAM_SIZE - sizeof(u64))) {
-
- writeq(val, hdev->pcie_bar[SRAM_CFG_BAR_ID] +
- (addr - SRAM_BASE_ADDR));
-
- } else if (addr <=
- DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
-
- u64 bar_base_addr = DRAM_PHYS_BASE +
- (addr & ~(prop->dram_pci_bar_size - 0x1ull));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev, bar_base_addr);
- if (ddr_bar_addr != U64_MAX) {
- writeq(val, hdev->pcie_bar[DDR_BAR_ID] +
- (addr - bar_base_addr));
-
- ddr_bar_addr = goya_set_ddr_bar_base(hdev,
- ddr_bar_addr);
- }
- if (ddr_bar_addr == U64_MAX)
- rc = -EIO;
-
- } else if (addr >= HOST_PHYS_BASE && addr < host_phys_end &&
- user_address && !iommu_present(&pci_bus_type)) {
- *(u64 *) phys_to_virt(addr - HOST_PHYS_BASE) = val;
-
- } else {
- rc = -EFAULT;
- }
-
- return rc;
-}
-
-static int goya_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size,
+int goya_debugfs_read_dma(struct hl_device *hdev, u64 addr, u32 size,
void *blob_addr)
{
dev_err(hdev->dev, "Reading via DMA is unimplemented yet\n");
@@ -5725,10 +5509,6 @@ static const struct hl_asic_funcs goya_funcs = {
.update_eq_ci = goya_update_eq_ci,
.context_switch = goya_context_switch,
.restore_phase_topology = goya_restore_phase_topology,
- .debugfs_read32 = goya_debugfs_read32,
- .debugfs_write32 = goya_debugfs_write32,
- .debugfs_read64 = goya_debugfs_read64,
- .debugfs_write64 = goya_debugfs_write64,
.debugfs_read_dma = goya_debugfs_read_dma,
.add_device_attr = goya_add_device_attr,
.handle_eqe = goya_handle_eqe,
--
2.25.1
next prev parent reply other threads:[~2022-04-01 12:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-01 12:20 [PATCH 1/7] habanalabs: add callback and field to be used for debugfs refactor Oded Gabbay
2022-04-01 12:20 ` [PATCH 2/7] habanalabs: unify code for memory access from debugfs Oded Gabbay
2022-04-01 12:20 ` [PATCH 3/7] habanalabs: enforce alignment upon registers access through debugfs Oded Gabbay
2022-04-01 12:20 ` Oded Gabbay [this message]
2022-04-01 12:20 ` [PATCH 5/7] habanalabs: wrong handle removal in memory manager Oded Gabbay
2022-04-01 12:20 ` [PATCH 6/7] habanalabs: remove redundant info print Oded Gabbay
2022-04-01 12:20 ` [PATCH 7/7] habanalabs: change a reset print to debug level Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220401122017.116205-4-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=dhirschfeld@habana.ai \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).