[PATCH 7/7] habanalabs: change a reset print to debug level

[Oded Gabbay <ogabbay@kernel.org>]

Currently we have two reset prints per reset. One is in the common
code and one in each asic-specific file.

We can change the asic-specific message to be debug only as we can
know the type of reset being done according to the print in the
common code, which is also easier to maintain.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 drivers/misc/habanalabs/gaudi/gaudi.c | 6 +++---
 drivers/misc/habanalabs/goya/goya.c   | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 33f7cfea53ae..b4bd40d47000 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -4212,7 +4212,7 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset
 	}
 
 	if (fw_reset) {
-		dev_info(hdev->dev,
+		dev_dbg(hdev->dev,
 			"Firmware performs HARD reset, going to wait %dms\n",
 			reset_timeout_ms);
 
@@ -4304,11 +4304,11 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset
 		WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST,
 			1 << PSOC_GLOBAL_CONF_SW_ALL_RST_IND_SHIFT);
 
-		dev_info(hdev->dev,
+		dev_dbg(hdev->dev,
 			"Issued HARD reset command, going to wait %dms\n",
 			reset_timeout_ms);
 	} else {
-		dev_info(hdev->dev,
+		dev_dbg(hdev->dev,
 			"Firmware performs HARD reset, going to wait %dms\n",
 			reset_timeout_ms);
 	}
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 8572b178ef7d..4d87dbf208f8 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -2825,12 +2825,12 @@ static void goya_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset)
 		goya_set_pll_refclk(hdev);
 
 		WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG, RESET_ALL);
-		dev_info(hdev->dev,
+		dev_dbg(hdev->dev,
 			"Issued HARD reset command, going to wait %dms\n",
 			reset_timeout_ms);
 	} else {
 		WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST_CFG, DMA_MME_TPC_RESET);
-		dev_info(hdev->dev,
+		dev_dbg(hdev->dev,
 			"Issued SOFT reset command, going to wait %dms\n",
 			reset_timeout_ms);
 	}
-- 
2.25.1