From: Dinh Nguyen <dinguyen@kernel.org>
To: davem@davemloft.net
Cc: dinguyen@kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org, peppe.cavallaro@st.com,
alexandre.torgue@foss.st.com, joabreu@synopsys.com
Subject: [PATCH] net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link
Date: Thu, 7 Apr 2022 08:25:21 -0500 [thread overview]
Message-ID: <20220407132521.579713-1-dinguyen@kernel.org> (raw)
When using a fixed-link, the altr_tse_pcs driver crashes
due to null-pointer dereference as no phy_device is provided to
tse_pcs_fix_mac_speed function. Fix this by adding a check for
phy_dev before calling the tse_pcs_fix_mac_speed() function.
Also clean up the tse_pcs_fix_mac_speed function a bit. There is
no need to check for splitter_base and sgmii_adapter_base
because the driver will fail if these 2 variables are not
derived from the device tree.
Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 8 --------
drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h | 4 ++++
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 13 +++++--------
3 files changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
index cd478d2cd871..00f6d347eaf7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c
@@ -57,10 +57,6 @@
#define TSE_PCS_USE_SGMII_ENA BIT(0)
#define TSE_PCS_IF_USE_SGMII 0x03
-#define SGMII_ADAPTER_CTRL_REG 0x00
-#define SGMII_ADAPTER_DISABLE 0x0001
-#define SGMII_ADAPTER_ENABLE 0x0000
-
#define AUTONEGO_LINK_TIMER 20
static int tse_pcs_reset(void __iomem *base, struct tse_pcs *pcs)
@@ -202,12 +198,8 @@ void tse_pcs_fix_mac_speed(struct tse_pcs *pcs, struct phy_device *phy_dev,
unsigned int speed)
{
void __iomem *tse_pcs_base = pcs->tse_pcs_base;
- void __iomem *sgmii_adapter_base = pcs->sgmii_adapter_base;
u32 val;
- writew(SGMII_ADAPTER_ENABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
-
pcs->autoneg = phy_dev->autoneg;
if (phy_dev->autoneg == AUTONEG_ENABLE) {
diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h
index 442812c0a4bd..694ac25ef426 100644
--- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h
@@ -10,6 +10,10 @@
#include <linux/phy.h>
#include <linux/timer.h>
+#define SGMII_ADAPTER_CTRL_REG 0x00
+#define SGMII_ADAPTER_ENABLE 0x0000
+#define SGMII_ADAPTER_DISABLE 0x0001
+
struct tse_pcs {
struct device *dev;
void __iomem *tse_pcs_base;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index b7c2579c963b..ac9e6c7a33b5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -18,9 +18,6 @@
#include "altr_tse_pcs.h"
-#define SGMII_ADAPTER_CTRL_REG 0x00
-#define SGMII_ADAPTER_DISABLE 0x0001
-
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
@@ -62,16 +59,14 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
{
struct socfpga_dwmac *dwmac = (struct socfpga_dwmac *)priv;
void __iomem *splitter_base = dwmac->splitter_base;
- void __iomem *tse_pcs_base = dwmac->pcs.tse_pcs_base;
void __iomem *sgmii_adapter_base = dwmac->pcs.sgmii_adapter_base;
struct device *dev = dwmac->dev;
struct net_device *ndev = dev_get_drvdata(dev);
struct phy_device *phy_dev = ndev->phydev;
u32 val;
- if ((tse_pcs_base) && (sgmii_adapter_base))
- writew(SGMII_ADAPTER_DISABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+ writew(SGMII_ADAPTER_DISABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
if (splitter_base) {
val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
@@ -93,7 +88,9 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
}
- if (tse_pcs_base && sgmii_adapter_base)
+ writew(SGMII_ADAPTER_ENABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+ if (phy_dev)
tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
}
--
2.25.1
next reply other threads:[~2022-04-07 13:26 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 13:25 Dinh Nguyen [this message]
2022-04-11 10:00 ` [PATCH] net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220407132521.579713-1-dinguyen@kernel.org \
--to=dinguyen@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=davem@davemloft.net \
--cc=joabreu@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox