[PATCH 3/7] ARM: dts: qcom: sdx65: Add support for SDHCI controller

Rohit Agarwal
2022-04-11T06:56:53Z

Add devicetree support for SDHCI controller found in Qualcomm SDX65
platform. The SDHCI controller is based on the MSM SDHCI v5 IP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index 365df74..632ac78 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -168,6 +168,19 @@
#interrupt-cells = <2>;
};

+ sdhc_1: sdhci@8804000 {
+ compatible = "qcom,sdx65-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0x08804000 0x1000>;
+ reg-names = "hc_mem";
+ interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+ <&gcc GCC_SDCC1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
pdc: interrupt-controller@b210000 {
compatible = "qcom,sdx65-pdc", "qcom,pdc";
reg = <0xb210000 0x10000>;
--
2.7.4