* [PATCH v1 1/1] iio: dac: ltc2632: Make use of device properties
@ 2022-04-13 19:22 Andy Shevchenko
2022-04-28 18:34 ` Jonathan Cameron
0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2022-04-13 19:22 UTC (permalink / raw)
To: Andy Shevchenko, linux-iio, linux-kernel
Cc: Jonathan Cameron, Lars-Peter Clausen
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/iio/dac/ltc2632.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c
index aed46c80757e..c0255f402056 100644
--- a/drivers/iio/dac/ltc2632.c
+++ b/drivers/iio/dac/ltc2632.c
@@ -10,6 +10,7 @@
#include <linux/spi/spi.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
+#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <asm/unaligned.h>
@@ -362,8 +363,7 @@ static int ltc2632_probe(struct spi_device *spi)
}
}
- indio_dev->name = dev_of_node(&spi->dev) ? dev_of_node(&spi->dev)->name
- : spi_get_device_id(spi)->name;
+ indio_dev->name = fwnode_get_name(dev_fwnode(&spi->dev)) ?: spi_get_device_id(spi)->name;
indio_dev->info = <c2632_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = chip_info->channels;
@@ -469,7 +469,7 @@ MODULE_DEVICE_TABLE(of, ltc2632_of_match);
static struct spi_driver ltc2632_driver = {
.driver = {
.name = "ltc2632",
- .of_match_table = of_match_ptr(ltc2632_of_match),
+ .of_match_table = ltc2632_of_match,
},
.probe = ltc2632_probe,
.remove = ltc2632_remove,
--
2.35.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v1 1/1] iio: dac: ltc2632: Make use of device properties
2022-04-13 19:22 [PATCH v1 1/1] iio: dac: ltc2632: Make use of device properties Andy Shevchenko
@ 2022-04-28 18:34 ` Jonathan Cameron
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Cameron @ 2022-04-28 18:34 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: linux-iio, linux-kernel, Lars-Peter Clausen
On Wed, 13 Apr 2022 22:22:03 +0300
Andy Shevchenko <andriy.shevchenko@linux.intel.com> wrote:
> Convert the module to be property provider agnostic and allow
> it to be used on non-OF platforms.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Hi Andy,
Not sure why I was sitting on this one.
Anyhow, now applied to the togreg branch of iio.git and pushed out
as testing for all the normal reasons.
Thanks,
Jonathan
> ---
> drivers/iio/dac/ltc2632.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/dac/ltc2632.c b/drivers/iio/dac/ltc2632.c
> index aed46c80757e..c0255f402056 100644
> --- a/drivers/iio/dac/ltc2632.c
> +++ b/drivers/iio/dac/ltc2632.c
> @@ -10,6 +10,7 @@
> #include <linux/spi/spi.h>
> #include <linux/module.h>
> #include <linux/iio/iio.h>
> +#include <linux/property.h>
> #include <linux/regulator/consumer.h>
>
> #include <asm/unaligned.h>
> @@ -362,8 +363,7 @@ static int ltc2632_probe(struct spi_device *spi)
> }
> }
>
> - indio_dev->name = dev_of_node(&spi->dev) ? dev_of_node(&spi->dev)->name
> - : spi_get_device_id(spi)->name;
> + indio_dev->name = fwnode_get_name(dev_fwnode(&spi->dev)) ?: spi_get_device_id(spi)->name;
> indio_dev->info = <c2632_info;
> indio_dev->modes = INDIO_DIRECT_MODE;
> indio_dev->channels = chip_info->channels;
> @@ -469,7 +469,7 @@ MODULE_DEVICE_TABLE(of, ltc2632_of_match);
> static struct spi_driver ltc2632_driver = {
> .driver = {
> .name = "ltc2632",
> - .of_match_table = of_match_ptr(ltc2632_of_match),
> + .of_match_table = ltc2632_of_match,
> },
> .probe = ltc2632_probe,
> .remove = ltc2632_remove,
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-28 18:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-04-13 19:22 [PATCH v1 1/1] iio: dac: ltc2632: Make use of device properties Andy Shevchenko
2022-04-28 18:34 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox