From: Ansuel Smith <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Ansuel Smith <ansuelsmth@gmail.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [net-next PATCH v3 3/6] net: dsa: qca8k: rework and simplify mdiobus logic
Date: Sat, 16 Apr 2022 01:30:14 +0200 [thread overview]
Message-ID: <20220415233017.23275-4-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220415233017.23275-1-ansuelsmth@gmail.com>
In an attempt to reduce qca8k_priv space, rework and simplify mdiobus
logic.
We now declare a mdiobus instead of relying on DSA phy_read/write even
if a mdio node is not present. This is all to make the qca8k ops static
and not switch specific. With a legacy implementation where port doesn't
have a phy map declared in the dts with a mdio node, we declare a
'qca8k-legacy' mdiobus. The conversion logic is used as legacy read and
write ops are used instead of the internal one.
Also drop the legacy_phy_port_mapping as we now declare mdiobus with ops
that already address the workaround.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
drivers/net/dsa/qca8k.c | 95 +++++++++++++----------------------------
drivers/net/dsa/qca8k.h | 1 -
2 files changed, 29 insertions(+), 67 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index 766db0d43092..24d57083ee2c 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1291,83 +1291,63 @@ qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
}
static int
-qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data)
{
- struct qca8k_priv *priv = ds->priv;
- int ret;
-
- /* Check if the legacy mapping should be used and the
- * port is not correctly mapped to the right PHY in the
- * devicetree
- */
- if (priv->legacy_phy_port_mapping)
- port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
- /* Use mdio Ethernet when available, fallback to legacy one on error */
- ret = qca8k_phy_eth_command(priv, false, port, regnum, 0);
- if (!ret)
- return ret;
-
- return qca8k_mdio_write(priv, port, regnum, data);
+ return qca8k_internal_mdio_write(slave_bus, port, regnum, data);
}
static int
-qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum)
{
- struct qca8k_priv *priv = ds->priv;
- int ret;
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
- /* Check if the legacy mapping should be used and the
- * port is not correctly mapped to the right PHY in the
- * devicetree
- */
- if (priv->legacy_phy_port_mapping)
- port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
-
- /* Use mdio Ethernet when available, fallback to legacy one on error */
- ret = qca8k_phy_eth_command(priv, true, port, regnum, 0);
- if (ret >= 0)
- return ret;
-
- ret = qca8k_mdio_read(priv, port, regnum);
-
- if (ret < 0)
- return 0xffff;
-
- return ret;
+ return qca8k_internal_mdio_read(slave_bus, port, regnum);
}
static int
-qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
+qca8k_mdio_register(struct qca8k_priv *priv)
{
struct dsa_switch *ds = priv->ds;
+ struct device_node *mdio;
struct mii_bus *bus;
bus = devm_mdiobus_alloc(ds->dev);
-
if (!bus)
return -ENOMEM;
bus->priv = (void *)priv;
- bus->name = "qca8k slave mii";
- bus->read = qca8k_internal_mdio_read;
- bus->write = qca8k_internal_mdio_write;
- snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
- ds->index);
-
bus->parent = ds->dev;
bus->phy_mask = ~ds->phys_mii_mask;
-
ds->slave_mii_bus = bus;
- return devm_of_mdiobus_register(priv->dev, bus, mdio);
+ /* Check if the devicetree declare the port:phy mapping */
+ mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (of_device_is_available(mdio)) {
+ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d", ds->index);
+ bus->name = "qca8k slave mii";
+ bus->read = qca8k_internal_mdio_read;
+ bus->write = qca8k_internal_mdio_write;
+ return devm_of_mdiobus_register(priv->dev, bus, mdio);
+ }
+
+ /* If a mapping can't be found the legacy mapping is used,
+ * using the qca8k_port_to_phy function
+ */
+ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d",
+ ds->dst->index, ds->index);
+ bus->name = "qca8k-legacy slave mii";
+ bus->read = qca8k_legacy_mdio_read;
+ bus->write = qca8k_legacy_mdio_write;
+ return devm_mdiobus_register(priv->dev, bus);
}
static int
qca8k_setup_mdio_bus(struct qca8k_priv *priv)
{
u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
- struct device_node *ports, *port, *mdio;
+ struct device_node *ports, *port;
phy_interface_t mode;
int err;
@@ -1429,24 +1409,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv)
QCA8K_MDIO_MASTER_EN);
}
- /* Check if the devicetree declare the port:phy mapping */
- mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
- if (of_device_is_available(mdio)) {
- err = qca8k_mdio_register(priv, mdio);
- if (err)
- of_node_put(mdio);
-
- return err;
- }
-
- /* If a mapping can't be found the legacy mapping is used,
- * using the qca8k_port_to_phy function
- */
- priv->legacy_phy_port_mapping = true;
- priv->ops.phy_read = qca8k_phy_read;
- priv->ops.phy_write = qca8k_phy_write;
-
- return 0;
+ return qca8k_mdio_register(priv);
}
static int
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 12d8d090298b..8bbe36f135b5 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -388,7 +388,6 @@ struct qca8k_priv {
* Bit 1: port enabled. Bit 0: port disabled.
*/
u8 port_enabled_map;
- bool legacy_phy_port_mapping;
struct qca8k_ports_config ports_config;
struct regmap *regmap;
struct mii_bus *bus;
--
2.34.1
next prev parent reply other threads:[~2022-04-15 23:30 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-15 23:30 [net-next PATCH v3 0/6] Reduce qca8k_priv space usage Ansuel Smith
2022-04-15 23:30 ` [net-next PATCH v3 1/6] net: dsa: qca8k: drop MTU tracking from qca8k_priv Ansuel Smith
2022-04-15 23:30 ` [net-next PATCH v3 2/6] net: dsa: qca8k: drop port_sts " Ansuel Smith
2022-04-15 23:30 ` Ansuel Smith [this message]
2022-04-15 23:30 ` [net-next PATCH v3 4/6] net: dsa: qca8k: drop dsa_switch_ops " Ansuel Smith
2022-04-15 23:30 ` [net-next PATCH v3 5/6] net: dsa: qca8k: correctly handle mdio read error Ansuel Smith
2022-04-15 23:30 ` [net-next PATCH v3 6/6] net: dsa: qca8k: unify bus id naming with legacy and OF mdio bus Ansuel Smith
2022-04-17 12:40 ` [net-next PATCH v3 0/6] Reduce qca8k_priv space usage patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220415233017.23275-4-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox