From: Lu Baolu <baolu.lu@linux.intel.com>
To: iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org, Lu Baolu <baolu.lu@linux.intel.com>,
Christoph Hellwig <hch@infradead.org>
Subject: [PATCH v2 2/2] iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
Date: Sat, 16 Apr 2022 20:04:23 +0800 [thread overview]
Message-ID: <20220416120423.879552-3-baolu.lu@linux.intel.com> (raw)
In-Reply-To: <20220416120423.879552-1-baolu.lu@linux.intel.com>
Fold dmar_insert_one_dev_info() into domain_add_dev_info() which is its
only caller.
No intentional functional impact.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
---
drivers/iommu/intel/iommu.c | 110 +++++++++++++++++-------------------
1 file changed, 51 insertions(+), 59 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index ae0301e3ce53..954c891ec01e 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -2474,64 +2474,6 @@ static bool dev_is_real_dma_subdevice(struct device *dev)
pci_real_dma_dev(to_pci_dev(dev)) != to_pci_dev(dev);
}
-static int dmar_insert_one_dev_info(struct intel_iommu *iommu, int bus,
- int devfn, struct device *dev,
- struct dmar_domain *domain)
-{
- struct device_domain_info *info = dev_iommu_priv_get(dev);
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&device_domain_lock, flags);
- info->domain = domain;
- spin_lock(&iommu->lock);
- ret = domain_attach_iommu(domain, iommu);
- spin_unlock(&iommu->lock);
- if (ret) {
- spin_unlock_irqrestore(&device_domain_lock, flags);
- return ret;
- }
- list_add(&info->link, &domain->devices);
- spin_unlock_irqrestore(&device_domain_lock, flags);
-
- /* PASID table is mandatory for a PCI device in scalable mode. */
- if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev)) {
- ret = intel_pasid_alloc_table(dev);
- if (ret) {
- dev_err(dev, "PASID table allocation failed\n");
- dmar_remove_one_dev_info(dev);
- return ret;
- }
-
- /* Setup the PASID entry for requests without PASID: */
- spin_lock_irqsave(&iommu->lock, flags);
- if (hw_pass_through && domain_type_is_si(domain))
- ret = intel_pasid_setup_pass_through(iommu, domain,
- dev, PASID_RID2PASID);
- else if (domain_use_first_level(domain))
- ret = domain_setup_first_level(iommu, domain, dev,
- PASID_RID2PASID);
- else
- ret = intel_pasid_setup_second_level(iommu, domain,
- dev, PASID_RID2PASID);
- spin_unlock_irqrestore(&iommu->lock, flags);
- if (ret) {
- dev_err(dev, "Setup RID2PASID failed\n");
- dmar_remove_one_dev_info(dev);
- return ret;
- }
- }
-
- ret = domain_context_mapping(domain, dev);
- if (ret) {
- dev_err(dev, "Domain context map failed\n");
- dmar_remove_one_dev_info(dev);
- return ret;
- }
-
- return 0;
-}
-
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long first_vpfn,
unsigned long last_vpfn)
@@ -2607,14 +2549,64 @@ static int __init si_domain_init(int hw)
static int domain_add_dev_info(struct dmar_domain *domain, struct device *dev)
{
+ struct device_domain_info *info = dev_iommu_priv_get(dev);
struct intel_iommu *iommu;
+ unsigned long flags;
u8 bus, devfn;
+ int ret;
iommu = device_to_iommu(dev, &bus, &devfn);
if (!iommu)
return -ENODEV;
- return dmar_insert_one_dev_info(iommu, bus, devfn, dev, domain);
+ spin_lock_irqsave(&device_domain_lock, flags);
+ info->domain = domain;
+ spin_lock(&iommu->lock);
+ ret = domain_attach_iommu(domain, iommu);
+ spin_unlock(&iommu->lock);
+ if (ret) {
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+ return ret;
+ }
+ list_add(&info->link, &domain->devices);
+ spin_unlock_irqrestore(&device_domain_lock, flags);
+
+ /* PASID table is mandatory for a PCI device in scalable mode. */
+ if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev)) {
+ ret = intel_pasid_alloc_table(dev);
+ if (ret) {
+ dev_err(dev, "PASID table allocation failed\n");
+ dmar_remove_one_dev_info(dev);
+ return ret;
+ }
+
+ /* Setup the PASID entry for requests without PASID: */
+ spin_lock_irqsave(&iommu->lock, flags);
+ if (hw_pass_through && domain_type_is_si(domain))
+ ret = intel_pasid_setup_pass_through(iommu, domain,
+ dev, PASID_RID2PASID);
+ else if (domain_use_first_level(domain))
+ ret = domain_setup_first_level(iommu, domain, dev,
+ PASID_RID2PASID);
+ else
+ ret = intel_pasid_setup_second_level(iommu, domain,
+ dev, PASID_RID2PASID);
+ spin_unlock_irqrestore(&iommu->lock, flags);
+ if (ret) {
+ dev_err(dev, "Setup RID2PASID failed\n");
+ dmar_remove_one_dev_info(dev);
+ return ret;
+ }
+ }
+
+ ret = domain_context_mapping(domain, dev);
+ if (ret) {
+ dev_err(dev, "Domain context map failed\n");
+ dmar_remove_one_dev_info(dev);
+ return ret;
+ }
+
+ return 0;
}
static bool device_has_rmrr(struct device *dev)
--
2.25.1
next prev parent reply other threads:[~2022-04-16 12:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-16 12:04 [PATCH v2 0/2] iommu/vt-d: Minor cleanups Lu Baolu
2022-04-16 12:04 ` [PATCH v2 1/2] iommu/vt-d: Change return type of dmar_insert_one_dev_info() Lu Baolu
2022-04-19 5:44 ` Christoph Hellwig
2022-04-16 12:04 ` Lu Baolu [this message]
2022-04-19 5:44 ` [PATCH v2 2/2] iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220416120423.879552-3-baolu.lu@linux.intel.com \
--to=baolu.lu@linux.intel.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox