From: "Thiébaud Weksteen" <tweek@google.com>
To: Luis Chamberlain <mcgrof@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Qian Cai <quic_qiancai@quicinc.com>
Cc: "Jeffrey Vander Stoep" <jeffv@google.com>,
"Saravana Kannan" <saravanak@google.com>,
"Alistair Delva" <adelva@google.com>,
"Adam Shih" <adamshih@google.com>,
selinux@vger.kernel.org, linux-kernel@vger.kernel.org,
"Thiébaud Weksteen" <tweek@google.com>
Subject: [PATCH v3] firmware_loader: use kernel credentials when reading firmware
Date: Thu, 28 Apr 2022 16:17:07 +1000 [thread overview]
Message-ID: <20220428061707.768468-1-tweek@google.com> (raw)
Device drivers may decide to not load firmware when probed to avoid
slowing down the boot process should the firmware filesystem not be
available yet. In this case, the firmware loading request may be done
when a device file associated with the driver is first accessed. The
credentials of the userspace process accessing the device file may be
used to validate access to the firmware files requested by the driver.
Ensure that the kernel assumes the responsibility of reading the
firmware.
This was observed on Android for a graphic driver loading their firmware
when the device file (e.g. /dev/mali0) was first opened by userspace
(i.e. surfaceflinger). The security context of surfaceflinger was used
to validate the access to the firmware file (e.g.
/vendor/firmware/mali.bin).
Previously, Android configurations were not setting up the
firmware_class.path command line argument and were relying on the
userspace fallback mechanism. In this case, the security context of the
userspace daemon (i.e. ueventd) was consistently used to read firmware
files. More Android devices are now found to set firmware_class.path
which gives the kernel the opportunity to read the firmware directly
(via kernel_read_file_from_path_initns). In this scenario, the current
process credentials were used, even if unrelated to the loading of the
firmware file.
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
---
v3:
- Add call to put_cred to avoid a memory leak. Confirmed that no new
memory leak occurs on a Pixel 4a.
- Update commit log.
v2: Add comment
drivers/base/firmware_loader/main.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index 94d1789a233e..406a907a4cae 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -735,6 +735,8 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
size_t offset, u32 opt_flags)
{
struct firmware *fw = NULL;
+ struct cred *kern_cred = NULL;
+ const struct cred *old_cred;
bool nondirect = false;
int ret;
@@ -751,6 +753,18 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
if (ret <= 0) /* error or already assigned */
goto out;
+ /*
+ * We are about to try to access the firmware file. Because we may have been
+ * called by a driver when serving an unrelated request from userland, we use
+ * the kernel credentials to read the file.
+ */
+ kern_cred = prepare_kernel_cred(NULL);
+ if (!kern_cred) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ old_cred = override_creds(kern_cred);
+
ret = fw_get_filesystem_firmware(device, fw->priv, "", NULL);
/* Only full reads can support decompression, platform, and sysfs. */
@@ -776,6 +790,9 @@ _request_firmware(const struct firmware **firmware_p, const char *name,
} else
ret = assign_fw(fw, device);
+ revert_creds(old_cred);
+ put_cred(kern_cred);
+
out:
if (ret < 0) {
fw_abort_batch_reqs(fw);
--
2.36.0.464.gb9c8b46e94-goog
next reply other threads:[~2022-04-28 6:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-28 6:17 Thiébaud Weksteen [this message]
2022-04-28 8:28 ` [PATCH v3] firmware_loader: use kernel credentials when reading firmware Greg Kroah-Hartman
2022-04-29 4:54 ` Thiébaud Weksteen
2022-04-29 6:33 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220428061707.768468-1-tweek@google.com \
--to=tweek@google.com \
--cc=adamshih@google.com \
--cc=adelva@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=jeffv@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mcgrof@kernel.org \
--cc=quic_qiancai@quicinc.com \
--cc=saravanak@google.com \
--cc=selinux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox