From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
asutoshd@codeaurora.org, jejb@linux.ibm.com,
martin.petersen@oracle.com, stanley.chu@mediatek.com,
beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
cang@codeaurora.org, daejun7.park@samsung.com,
peter.wang@mediatek.com, powen.kao@mediatek.com,
keosung.park@samsung.com
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/6] scsi: ufshpb: Change sysfs node hpb_stats/rb_* prefix to start with rcmd_*
Date: Thu, 5 May 2022 15:47:05 +0200 [thread overview]
Message-ID: <20220505134707.35929-5-huobean@gmail.com> (raw)
In-Reply-To: <20220505134707.35929-1-huobean@gmail.com>
From: Bean Huo <beanhuo@micron.com>
According to the documentation of the sysfs nodes rb_noti_cnt, rb_active_cnt
and rb_inactive_cnt, they are all related to HPB recommendation in UPIU response
packet. 'rcmd' (recommendation) should be the correct abbreviation.
Change the sysfs documentation about these sysfs nodes to highlight what they mean
under different HPB control modes.
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
---
Documentation/ABI/testing/sysfs-driver-ufs | 18 +++++++++-------
drivers/scsi/ufs/ufshpb.c | 24 +++++++++++-----------
drivers/scsi/ufs/ufshpb.h | 6 +++---
3 files changed, 26 insertions(+), 22 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index a44ef8bfbadf..6b248abb1bd7 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -1518,7 +1518,7 @@ Description: This entry shows the number of reads that cannot be changed to
The file is read only.
-What: /sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
+What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
Description: This entry shows the number of response UPIUs that has
@@ -1526,19 +1526,23 @@ Description: This entry shows the number of response UPIUs that has
The file is read only.
-What: /sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
+What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
-Description: This entry shows the number of active sub-regions recommended by
- response UPIUs.
+Description: For the HPB device control mode, this entry shows the number of
+ active sub-regions recommended by response UPIUs. For the HPB host control
+ mode, this entry shows the number of active sub-regions recommended by the
+ HPB host control mode heuristic algorithm.
The file is read only.
-What: /sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
+What: /sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt
Date: June 2021
Contact: Daejun Park <daejun7.park@samsung.com>
-Description: This entry shows the number of inactive regions recommended by
- response UPIUs.
+Description: For the HPB device control mode, this entry shows the number of
+ inactive regions recommended by response UPIUs. For the HPB host control
+ mode, this entry shows the number of inactive regions recommended by the
+ HPB host control mode heuristic algorithm.
The file is read only.
diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
index 901e0a3d4836..4833f20cc7d0 100644
--- a/drivers/scsi/ufs/ufshpb.c
+++ b/drivers/scsi/ufs/ufshpb.c
@@ -563,7 +563,7 @@ static void ufshpb_update_active_info(struct ufshpb_lu *hpb, int rgn_idx,
if (list_empty(&srgn->list_act_srgn))
list_add_tail(&srgn->list_act_srgn, &hpb->lh_act_srgn);
- hpb->stats.rb_active_cnt++;
+ hpb->stats.rcmd_active_cnt++;
}
static void ufshpb_update_inactive_info(struct ufshpb_lu *hpb, int rgn_idx)
@@ -580,7 +580,7 @@ static void ufshpb_update_inactive_info(struct ufshpb_lu *hpb, int rgn_idx)
if (list_empty(&rgn->list_inact_rgn))
list_add_tail(&rgn->list_inact_rgn, &hpb->lh_inact_rgn);
- hpb->stats.rb_inactive_cnt++;
+ hpb->stats.rcmd_inactive_cnt++;
}
static void ufshpb_activate_subregion(struct ufshpb_lu *hpb,
@@ -1321,7 +1321,7 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
if (!ufshpb_is_hpb_rsp_valid(hba, lrbp, rsp_field))
return;
- hpb->stats.rb_noti_cnt++;
+ hpb->stats.rcmd_noti_cnt++;
switch (rsp_field->hpb_op) {
case HPB_RSP_REQ_REGION_UPDATE:
@@ -1724,18 +1724,18 @@ static DEVICE_ATTR_RO(__name)
ufshpb_sysfs_attr_show_func(hit_cnt);
ufshpb_sysfs_attr_show_func(miss_cnt);
-ufshpb_sysfs_attr_show_func(rb_noti_cnt);
-ufshpb_sysfs_attr_show_func(rb_active_cnt);
-ufshpb_sysfs_attr_show_func(rb_inactive_cnt);
+ufshpb_sysfs_attr_show_func(rcmd_noti_cnt);
+ufshpb_sysfs_attr_show_func(rcmd_active_cnt);
+ufshpb_sysfs_attr_show_func(rcmd_inactive_cnt);
ufshpb_sysfs_attr_show_func(map_req_cnt);
ufshpb_sysfs_attr_show_func(umap_req_cnt);
static struct attribute *hpb_dev_stat_attrs[] = {
&dev_attr_hit_cnt.attr,
&dev_attr_miss_cnt.attr,
- &dev_attr_rb_noti_cnt.attr,
- &dev_attr_rb_active_cnt.attr,
- &dev_attr_rb_inactive_cnt.attr,
+ &dev_attr_rcmd_noti_cnt.attr,
+ &dev_attr_rcmd_active_cnt.attr,
+ &dev_attr_rcmd_inactive_cnt.attr,
&dev_attr_map_req_cnt.attr,
&dev_attr_umap_req_cnt.attr,
NULL,
@@ -2098,9 +2098,9 @@ static void ufshpb_stat_init(struct ufshpb_lu *hpb)
{
hpb->stats.hit_cnt = 0;
hpb->stats.miss_cnt = 0;
- hpb->stats.rb_noti_cnt = 0;
- hpb->stats.rb_active_cnt = 0;
- hpb->stats.rb_inactive_cnt = 0;
+ hpb->stats.rcmd_noti_cnt = 0;
+ hpb->stats.rcmd_active_cnt = 0;
+ hpb->stats.rcmd_inactive_cnt = 0;
hpb->stats.map_req_cnt = 0;
hpb->stats.umap_req_cnt = 0;
}
diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
index b83b9ec9044a..0d6e6004d783 100644
--- a/drivers/scsi/ufs/ufshpb.h
+++ b/drivers/scsi/ufs/ufshpb.h
@@ -211,9 +211,9 @@ struct ufshpb_params {
struct ufshpb_stats {
u64 hit_cnt;
u64 miss_cnt;
- u64 rb_noti_cnt;
- u64 rb_active_cnt;
- u64 rb_inactive_cnt;
+ u64 rcmd_noti_cnt;
+ u64 rcmd_active_cnt;
+ u64 rcmd_inactive_cnt;
u64 map_req_cnt;
u64 pre_req_cnt;
u64 umap_req_cnt;
--
2.34.1
next prev parent reply other threads:[~2022-05-05 13:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-05 13:47 [PATCH v4 0/6] Several changes for UFSHPB Bean Huo
2022-05-05 13:47 ` [PATCH v4 1/6] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host() Bean Huo
2022-05-05 13:47 ` [PATCH v4 2/6] scsi: ufshpb: Remove 0 assignment for enum value Bean Huo
2022-05-05 13:47 ` [PATCH v4 3/6] scsi: ufshpb: Cleanup the handler when device reset HPB information Bean Huo
2022-05-05 13:47 ` Bean Huo [this message]
2022-05-05 13:47 ` [PATCH v4 5/6] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode Bean Huo
2022-05-05 13:47 ` [PATCH v4 6/6] scsi: ufshpb: Cleanup ufshpb_suspend/resume Bean Huo
2022-05-11 2:02 ` [PATCH v4 0/6] Several changes for UFSHPB Martin K. Petersen
2022-05-17 2:16 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220505134707.35929-5-huobean@gmail.com \
--to=huobean@gmail.com \
--cc=alim.akhtar@samsung.com \
--cc=asutoshd@codeaurora.org \
--cc=avri.altman@wdc.com \
--cc=beanhuo@micron.com \
--cc=bvanassche@acm.org \
--cc=cang@codeaurora.org \
--cc=daejun7.park@samsung.com \
--cc=jejb@linux.ibm.com \
--cc=keosung.park@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=peter.wang@mediatek.com \
--cc=powen.kao@mediatek.com \
--cc=stanley.chu@mediatek.com \
--cc=tomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox