From: Sumit Gupta <sumitg@nvidia.com>
To: <linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>, <robh+dt@kernel.org>,
<kbuild-all@lists.01.org>
Cc: <sumitg@nvidia.com>, <bbasu@nvidia.com>, <vsethi@nvidia.com>,
<jsequeira@nvidia.com>
Subject: [Patch v6 7/9] arm64: tegra: Add node for CBB2.0 in Tegra234 SOC
Date: Thu, 12 May 2022 01:46:49 +0530 [thread overview]
Message-ID: <20220511201651.30695-9-sumitg@nvidia.com> (raw)
In-Reply-To: <20220511201651.30695-1-sumitg@nvidia.com>
Control Backbone(CBB) version 2.0 is used in Tegra234 SOC.
Adding nodes to enable handling of errors from different
CBB 2.0 based fabrics in Tegra234 SOC.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 42 ++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index cb3af539e477..5da0c379efc9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -933,6 +933,20 @@
status = "okay";
};
+ sce-fabric@b600000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xb600000 0x40000>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ rce-fabric@be00000 {
+ compatible = "nvidia,tegra234-rce-fabric";
+ reg = <0xbe00000 0x40000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
reg = <0x0c150000 0x90000>;
@@ -1017,6 +1031,27 @@
interrupt-controller;
};
+ aon-fabric@c600000 {
+ compatible = "nvidia,tegra234-aon-fabric";
+ reg = <0xc600000 0x40000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ bpmp-fabric@d600000 {
+ compatible = "nvidia,tegra234-bpmp-fabric";
+ reg = <0xd600000 0x40000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
+ dce-fabric@de00000 {
+ compatible = "nvidia,tegra234-sce-fabric";
+ reg = <0xde00000 0x40000>;
+ interrupts = <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
+
gic: interrupt-controller@f400000 {
compatible = "arm,gic-v3";
reg = <0x0f400000 0x010000>, /* GICD */
@@ -1310,6 +1345,13 @@
nvidia,memory-controller = <&mc>;
status = "okay";
};
+
+ cbb-fabric@0x13a00000 {
+ compatible = "nvidia,tegra234-cbb-fabric";
+ reg = <0x13a00000 0x400000>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ };
};
ccplex@e000000 {
--
2.17.1
next prev parent reply other threads:[~2022-05-11 20:18 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-11 20:16 [Patch v6 0/9] CBB driver for Tegra194, Tegra234 & Tegra-Grace Sumit Gupta
2022-05-11 20:16 ` Sumit Gupta
2022-06-28 9:24 ` Sumit Gupta
2022-05-11 20:16 ` [Patch v6 1/9] soc: tegra: set ERD bit to mask inband errors Sumit Gupta
2022-05-11 20:16 ` [Patch v6 2/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB1.0 binding Sumit Gupta
2022-05-17 17:56 ` Rob Herring
2022-05-11 20:16 ` [Patch v6 3/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 axi2apb binding Sumit Gupta
2022-05-11 20:16 ` [Patch v6 4/9] arm64: tegra: Add node for CBB1.0 in Tegra194 SOC Sumit Gupta
2022-05-11 20:16 ` [Patch v6 5/9] soc: tegra: cbb: Add CBB1.0 driver for Tegra194 Sumit Gupta
2022-05-11 20:16 ` [Patch v6 6/9] dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB2.0 binding Sumit Gupta
2022-05-17 17:56 ` Rob Herring
2022-05-11 20:16 ` Sumit Gupta [this message]
2022-05-11 20:16 ` [Patch v6 8/9] soc: tegra: cbb: Add driver for Tegra234 CBB2.0 Sumit Gupta
2022-05-11 20:16 ` [Patch v6 9/9] soc: tegra: cbb: Add support for tegra-grace SOC Sumit Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220511201651.30695-9-sumitg@nvidia.com \
--to=sumitg@nvidia.com \
--cc=bbasu@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=jsequeira@nvidia.com \
--cc=kbuild-all@lists.01.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=vsethi@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox