Re: [PATCH v2] mailbox: qcom-ipcc: Log the pending interrupt during resume

[Manivannan Sadhasivam <mani@kernel.org>]

On Thu, May 12, 2022 at 03:08:43PM +0530, Sibi Sankar wrote:
> Hey Mani,
> 
> Thanks for taking time to review the patch.
> 
> On 5/12/22 1:13 PM, Manivannan Sadhasivam wrote:
> > On Wed, May 11, 2022 at 12:13:24PM +0530, Sibi Sankar wrote:
> > > From: Prasad Sodagudi <quic_psodagud@quicinc.com>
> > > 
> > > Enable logging of the pending interrupt that triggered device wakeup. This
> > > logging information helps to debug IRQs that cause periodic device wakeups
> > > and prints the detailed information of pending IPCC interrupts instead of
> > > the generic "Resume caused by IRQ 17, ipcc".
> > > 
> > > Scenario: Device wakeup caused by Modem crash
> > > Logs:
> > > qcom-ipcc mailbox: virq: 182 triggered client-id: 2; signal-id: 2
> > > 
> > >  From the IPCC bindings it can further understood that the client here is
> > > IPCC_CLIENT_MPSS and the signal was IPCC_MPROC_SIGNAL_SMP2P.
> > > 
> > > Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
> > > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> > > ---
> > > 
> > > V2:
> > >   * Fix build error when ipcc is a module [Kernel Test Bot]
> > > 
> > >   drivers/mailbox/qcom-ipcc.c | 27 +++++++++++++++++++++++++++
> > >   1 file changed, 27 insertions(+)
> > > 
> > > diff --git a/drivers/mailbox/qcom-ipcc.c b/drivers/mailbox/qcom-ipcc.c
> > > index c5d963222014..21c071ec119c 100644
> > > --- a/drivers/mailbox/qcom-ipcc.c
> > > +++ b/drivers/mailbox/qcom-ipcc.c
> > > @@ -254,6 +254,28 @@ static int qcom_ipcc_setup_mbox(struct qcom_ipcc *ipcc,
> > >   	return devm_mbox_controller_register(dev, mbox);
> > >   }
> > > +#ifdef CONFIG_PM_SLEEP
> > 
> > You don't need this guard anymore. Please see below.
> 
> ack
> 
> > 
> > > +static int qcom_ipcc_pm_resume(struct device *dev)
> > > +{
> > > +	struct qcom_ipcc *ipcc = dev_get_drvdata(dev);
> > > +	u32 hwirq;
> > > +	int virq;
> > > +
> > > +	hwirq = readl(ipcc->base + IPCC_REG_RECV_ID);
> > > +	if (hwirq == IPCC_NO_PENDING_IRQ)
> > > +		return 0;
> > > +
> > > +	virq = irq_find_mapping(ipcc->irq_domain, hwirq);
> > > +
> > > +	dev_info(dev, "virq: %d triggered client-id: %ld; signal-id: %ld\n", virq,
> > > +		 FIELD_GET(IPCC_CLIENT_ID_MASK, hwirq), FIELD_GET(IPCC_SIGNAL_ID_MASK, hwirq));
> > > +
> > 
> > Does this really need to be dev_info? This looks like a dev_dbg() material to
> > me.
> 
> The whole point of the log is to catch sporadic issues like random
> wakeups caused by remoteprocs through ipcc. We would just end up with
> a single line identifying the client id during resume if ipcc had indeed
> caused the wakeup else it wouldn't print anything.
> 

Right but that information is only required for debugging the periodic wakeups.
And that's not going to be useful for an end user.

Thanks,
Mani

> -Sibi
> > 
> > > +	return 0;
> > > +}
> > > +#else
> > > +#define qcom_ipcc_pm_resume NULL
> > > +#endif
> > > +
> > >   static int qcom_ipcc_probe(struct platform_device *pdev)
> > >   {
> > >   	struct qcom_ipcc *ipcc;
> > > @@ -324,6 +346,10 @@ static const struct of_device_id qcom_ipcc_of_match[] = {
> > >   };
> > >   MODULE_DEVICE_TABLE(of, qcom_ipcc_of_match);
> > > +static const struct dev_pm_ops qcom_ipcc_dev_pm_ops = {
> > > +	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, qcom_ipcc_pm_resume)
> > > +};
> > > +
> > >   static struct platform_driver qcom_ipcc_driver = {
> > >   	.probe = qcom_ipcc_probe,
> > >   	.remove = qcom_ipcc_remove,
> > > @@ -331,6 +357,7 @@ static struct platform_driver qcom_ipcc_driver = {
> > >   		.name = "qcom-ipcc",
> > >   		.of_match_table = qcom_ipcc_of_match,
> > >   		.suppress_bind_attrs = true,
> > > +		.pm = &qcom_ipcc_dev_pm_ops,
> > 
> > You can use the new pm_sleep_ptr() macro to avoid the PM_SLEEP guard.
> > 
> > 		.pm = pm_sleep_ptr(&qcom_ipcc_dev_pm_ops),
> 
> ack
> 
> > 
> > Thanks,
> > Mani
> > 
> > >   	},
> > >   };
> > > -- 
> > > 2.7.4
> > > 
> > 

-- 
மணிவண்ணன் சதாசிவம்