From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.14 21/25] USB: serial: option: add Fibocom MA510 modem
Date: Mon, 16 May 2022 21:36:35 +0200 [thread overview]
Message-ID: <20220516193615.326220116@linuxfoundation.org> (raw)
In-Reply-To: <20220516193614.678319286@linuxfoundation.org>
From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.
The MA510 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
following interfaces, respectively:
30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM
The first configuration (30) reuses u-blox R410M's VID/PID with
identical interface configuration.
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 30
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05c6 ProdID=90b2 Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0106 Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=010a Rev= 0.00
S: Manufacturer=Fibocom MA510 Modem
S: Product=Fibocom MA510 Modem
S: SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2131,6 +2131,8 @@ static const struct usb_device_id option
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
.driver_info = RSVD(6) },
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0106, 0xff) }, /* Fibocom MA510 (ECM mode w/ diag intf.) */
+ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x010a, 0xff) }, /* Fibocom MA510 (ECM mode) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */
next prev parent reply other threads:[~2022-05-16 19:43 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 19:36 [PATCH 4.14 00/25] 4.14.280-rc1 review Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 01/25] batman-adv: Dont skb_split skbuffs with frag_list Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 02/25] net: Fix features skip in for_each_netdev_feature() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 03/25] ipv4: drop dst in multicast routing path Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 04/25] netlink: do not reset transport header in netlink_recvmsg() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 05/25] mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 06/25] hwmon: (ltq-cputemp) restrict it to SOC_XWAY Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 07/25] s390/ctcm: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 08/25] s390/ctcm: fix potential memory leak Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 09/25] s390/lcs: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 10/25] net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 11/25] net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 12/25] hwmon: (f71882fg) Fix negative temperature Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 13/25] ASoC: max98090: Reject invalid values in custom control put() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 14/25] ASoC: max98090: Generate notifications on changes for custom control Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 15/25] ASoC: ops: Validate input values in snd_soc_put_volsw_range() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 16/25] tcp: resalt the secret every 10 seconds Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 17/25] usb: cdc-wdm: fix reading stuck on device close Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 18/25] USB: serial: pl2303: add device id for HP LM930 Display Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 19/25] USB: serial: qcserial: add support for Sierra Wireless EM7590 Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 20/25] USB: serial: option: add Fibocom L610 modem Greg Kroah-Hartman
2022-05-16 19:36 ` Greg Kroah-Hartman [this message]
2022-05-16 19:36 ` [PATCH 4.14 22/25] cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 23/25] drm/vmwgfx: Initialize drm_mode_fb_cmd2 Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 24/25] ping: fix address binding wrt vrf Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 4.14 25/25] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe() Greg Kroah-Hartman
2022-05-17 19:29 ` [PATCH 4.14 00/25] 4.14.280-rc1 review Guenter Roeck
2022-05-18 8:33 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516193615.326220116@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sven.schwermer@disruptive-technologies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox