From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 5.10 47/66] USB: serial: option: add Fibocom L610 modem
Date: Mon, 16 May 2022 21:36:47 +0200 [thread overview]
Message-ID: <20220516193620.772043991@linuxfoundation.org> (raw)
In-Reply-To: <20220516193619.400083785@linuxfoundation.org>
From: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.
The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:
31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT
A detailed description of the USB configuration for each mode follows:
+GTUSBMODE: 31
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d10 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 32
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+GTUSBMODE: 33
--------------
T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4d11 Rev= 0.00
S: Manufacturer=FIBOCOM
S: Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2123,6 +2123,8 @@ static const struct usb_device_id option
.driver_info = RSVD(3) },
{ USB_DEVICE(0x1508, 0x1001), /* Fibocom NL668 (IOT version) */
.driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
+ { USB_DEVICE(0x1782, 0x4d10) }, /* Fibocom L610 (AT mode) */
+ { USB_DEVICE_INTERFACE_CLASS(0x1782, 0x4d11, 0xff) }, /* Fibocom L610 (ECM/RNDIS mode) */
{ USB_DEVICE(0x2cb7, 0x0104), /* Fibocom NL678 series */
.driver_info = RSVD(4) | RSVD(5) },
{ USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */
next prev parent reply other threads:[~2022-05-16 20:08 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-16 19:36 [PATCH 5.10 00/66] 5.10.117-rc1 review Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 01/66] batman-adv: Dont skb_split skbuffs with frag_list Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 02/66] iwlwifi: iwl-dbg: Use del_timer_sync() before freeing Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 03/66] hwmon: (tmp401) Add OF device ID table Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 04/66] mac80211: Reset MBSSID parameters upon connection Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 05/66] net: Fix features skip in for_each_netdev_feature() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 06/66] net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 07/66] net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 08/66] net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0 Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 09/66] net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 10/66] ipv4: drop dst in multicast routing path Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 11/66] drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 12/66] netlink: do not reset transport header in netlink_recvmsg() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 13/66] sfc: Use swap() instead of open coding it Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 14/66] net: sfc: fix memory leak due to ptp channel Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 15/66] mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 16/66] nfs: fix broken handling of the softreval mount option Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 17/66] ionic: fix missing pci_release_regions() on error in ionic_probe() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 18/66] dim: initialize all struct fields Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 19/66] hwmon: (ltq-cputemp) restrict it to SOC_XWAY Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 20/66] selftests: vm: Makefile: rename TARGETS to VMTARGETS Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 21/66] s390/ctcm: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 22/66] s390/ctcm: fix potential memory leak Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 23/66] s390/lcs: fix variable dereferenced before check Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 24/66] net/sched: act_pedit: really ensure the skb is writable Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 25/66] net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 26/66] net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 27/66] net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 28/66] net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 29/66] tls: Fix context leak on tls_device_down Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 30/66] gfs2: Fix filesystem block deallocation for short writes Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 31/66] hwmon: (f71882fg) Fix negative temperature Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 32/66] ASoC: max98090: Reject invalid values in custom control put() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 33/66] ASoC: max98090: Generate notifications on changes for custom control Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 34/66] ASoC: ops: Validate input values in snd_soc_put_volsw_range() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 35/66] s390: disable -Warray-bounds Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 36/66] net: emaclite: Dont advertise 1000BASE-T and do auto negotiation Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 37/66] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 38/66] tcp: resalt the secret every 10 seconds Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 39/66] firmware_loader: use kernel credentials when reading firmware Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 40/66] tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 41/66] tty: n_gsm: fix mux activation issues in gsm_config() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 42/66] usb: cdc-wdm: fix reading stuck on device close Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 43/66] usb: typec: tcpci: Dont skip cleanup in .remove() on error Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 44/66] usb: typec: tcpci_mt6360: Update for BMC PHY setting Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 45/66] USB: serial: pl2303: add device id for HP LM930 Display Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 46/66] USB: serial: qcserial: add support for Sierra Wireless EM7590 Greg Kroah-Hartman
2022-05-16 19:36 ` Greg Kroah-Hartman [this message]
2022-05-16 19:36 ` [PATCH 5.10 48/66] USB: serial: option: add Fibocom MA510 modem Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 49/66] slimbus: qcom: Fix IRQ check in qcom_slim_probe Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 50/66] serial: 8250_mtk: Fix UART_EFR register address Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 51/66] serial: 8250_mtk: Fix register address for XON/XOFF character Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 52/66] ceph: fix setting of xattrs on async created inodes Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 53/66] drm/nouveau/tegra: Stop using iommu_present() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 54/66] i40e: i40e_main: fix a missing check on list iterator Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 55/66] net: atlantic: always deep reset on pm op, fixing up my null deref regression Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 56/66] cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp() Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 57/66] drm/vmwgfx: Initialize drm_mode_fb_cmd2 Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 58/66] SUNRPC: Clean up scheduling of autoclose Greg Kroah-Hartman
2022-05-16 19:36 ` [PATCH 5.10 59/66] SUNRPC: Prevent immediate close+reconnect Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 60/66] SUNRPC: Dont call connect() more than once on a TCP socket Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 61/66] SUNRPC: Ensure we flush any closed sockets before xs_xprt_free() Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 62/66] net: phy: Fix race condition on link status change Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 63/66] arm[64]/memremap: dont abuse pfn_valid() to ensure presence of linear map Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 64/66] ping: fix address binding wrt vrf Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 65/66] usb: gadget: uvc: rename function to be more consistent Greg Kroah-Hartman
2022-05-16 19:37 ` [PATCH 5.10 66/66] usb: gadget: uvc: allow for application to cleanly shutdown Greg Kroah-Hartman
2022-05-17 3:38 ` [PATCH 5.10 00/66] 5.10.117-rc1 review Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220516193620.772043991@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sven.schwermer@disruptive-technologies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox