[Patch net-next 1/9] net: dsa: microchip: ksz8795: update the port_cnt value in ksz_chip_data

Arun Ramadoss
2022-05-17T09:45:07Z

The port_cnt value in the structure is not used in the switch_init.
Instead it uses the fls(chip->cpu_port), this is due to one of port in
the ksz8794 unavailable. The cpu_port for the 8794 is 0x10, fls(0x10) =
5, hence updating it directly in the ksz_chip_data structure in order to
same with all the other switches in ksz8795.c and ksz9477.c files.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
---
drivers/net/dsa/microchip/ksz8795.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index f91deea9368e..83bcabf2dc54 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -1607,6 +1607,7 @@ static const struct ksz_chip_data ksz8_switch_chips[] = {
* KSZ8794 0,1,2 4
* KSZ8795 0,1,2,3 4
* KSZ8765 0,1,2,3 4
+ * port_cnt is configured as 5, even though it is 4
*/
.chip_id = 0x8794,
.dev_name = "KSZ8794",
@@ -1614,7 +1615,7 @@ static const struct ksz_chip_data ksz8_switch_chips[] = {
.num_alus = 0,
.num_statics = 8,
.cpu_ports = 0x10, /* can be configured as cpu port */
- .port_cnt = 4, /* total cpu and user ports */
+ .port_cnt = 5, /* total cpu and user ports */
.ksz87xx_eee_link_erratum = true,
},
{
@@ -1653,7 +1654,7 @@ static int ksz8_switch_init(struct ksz_device *dev)
dev->num_vlans = chip->num_vlans;
dev->num_alus = chip->num_alus;
dev->num_statics = chip->num_statics;
- dev->port_cnt = fls(chip->cpu_ports);
+ dev->port_cnt = chip->port_cnt;
dev->cpu_port = fls(chip->cpu_ports) - 1;
dev->phy_port_cnt = dev->port_cnt - 1;
dev->cpu_ports = chip->cpu_ports;
--
2.33.0