[PATCH 4.14 11/33] mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

From: Ulf Hansson <ulf.hansson@linaro.org>

commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream

The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH
to complete, are not defined by the eMMC spec. However, a timeout of 10
minutes as is currently being used, is just silly for both of these cases.
Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for
CACHE_FLUSH.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/mmc/core/mmc_ops.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -23,7 +23,9 @@
 #include "host.h"
 #include "mmc_ops.h"
 
-#define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */
+#define MMC_OPS_TIMEOUT_MS		(10 * 60 * 1000) /* 10min*/
+#define MMC_BKOPS_TIMEOUT_MS		(120 * 1000) /* 120s */
+#define MMC_CACHE_FLUSH_TIMEOUT_MS	(30 * 1000) /* 30s */
 
 static const u8 tuning_blk_pattern_4bit[] = {
 	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
@@ -979,7 +981,7 @@ void mmc_start_bkops(struct mmc_card *ca
 
 	mmc_claim_host(card->host);
 	if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
-		timeout = MMC_OPS_TIMEOUT_MS;
+		timeout = MMC_BKOPS_TIMEOUT_MS;
 		use_busy_signal = true;
 	} else {
 		timeout = 0;
@@ -1022,7 +1024,8 @@ int mmc_flush_cache(struct mmc_card *car
 			(card->ext_csd.cache_size > 0) &&
 			(card->ext_csd.cache_ctrl & 1)) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_FLUSH_CACHE, 1, 0);
+				 EXT_CSD_FLUSH_CACHE, 1,
+				 MMC_CACHE_FLUSH_TIMEOUT_MS);
 		if (err)
 			pr_err("%s: cache flush error %d\n",
 					mmc_hostname(card->host), err);