[PATCH 5.4 19/68] mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC

Greg Kroah-Hartman
2022-05-23T17:17:47Z

From: Ulf Hansson <ulf.hansson@linaro.org>

commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream

The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH
to complete, are not defined by the eMMC spec. However, a timeout of 10
minutes as is currently being used, is just silly for both of these cases.
Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for
CACHE_FLUSH.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/core/mmc_ops.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -19,7 +19,9 @@
#include "host.h"
#include "mmc_ops.h"

-#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10min*/
+#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */
+#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */

static const u8 tuning_blk_pattern_4bit[] = {
0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
@@ -943,7 +945,7 @@ void mmc_run_bkops(struct mmc_card *card
* urgent levels by using an asynchronous background task, when idle.
*/
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS);
+ EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS);
if (err)
pr_warn("%s: Error %d starting bkops\n",
mmc_hostname(card->host), err);
@@ -961,7 +963,8 @@ int mmc_flush_cache(struct mmc_card *car

if (mmc_cache_enabled(card->host)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_FLUSH_CACHE, 1, 0);
+ EXT_CSD_FLUSH_CACHE, 1,
+ MMC_CACHE_FLUSH_TIMEOUT_MS);
if (err)
pr_err("%s: cache flush error %d\n",
mmc_hostname(card->host), err);