[PATCH 5.17 068/158] arm64: dts: qcom: sm8250: dont enable rx/tx macro by default

Greg Kroah-Hartman
2022-05-23T18:03:56Z

From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

[ Upstream commit 18019eb62efb68c9b365acca9c4fcb2e0d459487 ]

Enabling rxmacro and txmacro nodes by defaults makes Qualcomm RB5 to
crash and reboot while probing audio devices. Disable these device tree
nodes by default and enabled them only when necessary (for the
SM8250-MTP board).

Fixes: 24f52ef0c4bf ("arm64: dts: qcom: sm8250: Add nodes for tx and rx macros with soundwire masters")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220401185814.519653-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 12 ++++++++++++
arch/arm64/boot/dts/qcom/sm8250.dtsi | 4 ++++
2 files changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index fb99cc2827c7..7ab3627cc347 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -622,6 +622,10 @@ &qupv3_id_2 {
status = "okay";
};

+&rxmacro {
+ status = "okay";
+};
+
&slpi {
status = "okay";
firmware-name = "qcom/sm8250/slpi.mbn";
@@ -773,6 +777,8 @@ right_spkr: wsa8810-left@0,4{
};

&swr1 {
+ status = "okay";
+
wcd_rx: wcd9380-rx@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
@@ -781,6 +787,8 @@ wcd_rx: wcd9380-rx@0,4 {
};

&swr2 {
+ status = "okay";
+
wcd_tx: wcd9380-tx@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
@@ -819,6 +827,10 @@ config {
};
};

+&txmacro {
+ status = "okay";
+};
+
&uart12 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a92230bec1dd..bd212f6c351f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2150,6 +2150,7 @@ rxmacro: rxmacro@3200000 {
pinctrl-0 = <&rx_swr_active>;
compatible = "qcom,sm8250-lpass-rx-macro";
reg = <0 0x3200000 0 0x1000>;
+ status = "disabled";

clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2168,6 +2169,7 @@ rxmacro: rxmacro@3200000 {
swr1: soundwire-controller@3210000 {
reg = <0 0x3210000 0 0x2000>;
compatible = "qcom,soundwire-v1.5.1";
+ status = "disabled";
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&rxmacro>;
clock-names = "iface";
@@ -2195,6 +2197,7 @@ txmacro: txmacro@3220000 {
pinctrl-0 = <&tx_swr_active>;
compatible = "qcom,sm8250-lpass-tx-macro";
reg = <0 0x3220000 0 0x1000>;
+ status = "disabled";

clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2218,6 +2221,7 @@ swr2: soundwire-controller@3230000 {
compatible = "qcom,soundwire-v1.5.1";
interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "core";
+ status = "disabled";

clocks = <&txmacro>;
clock-names = "iface";
--
2.35.1