From: Jason Gunthorpe <jgg@nvidia.com>
To: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>,
Christoph Hellwig <hch@infradead.org>,
Kevin Tian <kevin.tian@intel.com>,
Ashok Raj <ashok.raj@intel.com>, Will Deacon <will@kernel.org>,
Robin Murphy <robin.murphy@arm.com>,
Jean-Philippe Brucker <jean-philippe@linaro.com>,
Dave Jiang <dave.jiang@intel.com>, Vinod Koul <vkoul@kernel.org>,
Eric Auger <eric.auger@redhat.com>, Liu Yi L <yi.l.liu@intel.com>,
Jacob jun Pan <jacob.jun.pan@intel.com>,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
Jean-Philippe Brucker <jean-philippe@linaro.org>
Subject: Re: [PATCH v7 03/10] iommu/sva: Add iommu_sva_domain support
Date: Tue, 24 May 2022 10:44:40 -0300 [thread overview]
Message-ID: <20220524134440.GT1343366@nvidia.com> (raw)
In-Reply-To: <20220519072047.2996983-4-baolu.lu@linux.intel.com>
On Thu, May 19, 2022 at 03:20:40PM +0800, Lu Baolu wrote:
> The iommu_sva_domain represents a hardware pagetable that the IOMMU
> hardware could use for SVA translation. This adds some infrastructure
> to support SVA domain in the iommu common layer. It includes:
>
> - Add a new struct iommu_sva_domain and new IOMMU_DOMAIN_SVA domain
> type.
> - Add a new domain ops pointer in iommu_ops. The IOMMU drivers that
> support SVA should provide the callbacks.
> - Add helpers to allocate and free an SVA domain.
> - Add helpers to set an SVA domain to a device and the reverse
> operation.
>
> Some buses, like PCI, route packets without considering the PASID value.
> Thus a DMA target address with PASID might be treated as P2P if the
> address falls into the MMIO BAR of other devices in the group. To make
> things simple, the attach/detach interfaces only apply to devices
> belonging to the singleton groups, and the singleton is immutable in
> fabric i.e. not affected by hotplug.
>
> The iommu_set/block_device_pasid() can be used for other purposes,
> such as kernel DMA with pasid, mediation device, etc. Hence, it is put
> in the iommu.c.
>
> Suggested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> include/linux/iommu.h | 51 +++++++++++++++++++++++++
> drivers/iommu/iommu-sva-lib.h | 15 ++++++++
> drivers/iommu/iommu-sva-lib.c | 48 +++++++++++++++++++++++
> drivers/iommu/iommu.c | 71 +++++++++++++++++++++++++++++++++++
> 4 files changed, 185 insertions(+)
>
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 0c358b7c583b..e8cf82d46ce1 100644
> +++ b/include/linux/iommu.h
> @@ -64,6 +64,9 @@ struct iommu_domain_geometry {
> #define __IOMMU_DOMAIN_PT (1U << 2) /* Domain is identity mapped */
> #define __IOMMU_DOMAIN_DMA_FQ (1U << 3) /* DMA-API uses flush queue */
>
> +#define __IOMMU_DOMAIN_SHARED (1U << 4) /* Page table shared from CPU */
> +#define __IOMMU_DOMAIN_HOST_VA (1U << 5) /* Host CPU virtual address */
> +
> /*
> * This are the possible domain-types
> *
> @@ -86,6 +89,8 @@ struct iommu_domain_geometry {
> #define IOMMU_DOMAIN_DMA_FQ (__IOMMU_DOMAIN_PAGING | \
> __IOMMU_DOMAIN_DMA_API | \
> __IOMMU_DOMAIN_DMA_FQ)
> +#define IOMMU_DOMAIN_SVA (__IOMMU_DOMAIN_SHARED | \
> + __IOMMU_DOMAIN_HOST_VA)
>
> struct iommu_domain {
> unsigned type;
> @@ -254,6 +259,7 @@ struct iommu_ops {
> int (*def_domain_type)(struct device *dev);
>
> const struct iommu_domain_ops *default_domain_ops;
> + const struct iommu_domain_ops *sva_domain_ops;
> unsigned long pgsize_bitmap;
> struct module *owner;
> };
> @@ -262,6 +268,8 @@ struct iommu_ops {
> * struct iommu_domain_ops - domain specific operations
> * @attach_dev: attach an iommu domain to a device
> * @detach_dev: detach an iommu domain from a device
> + * @set_dev_pasid: set an iommu domain to a pasid of device
> + * @block_dev_pasid: block pasid of device from using iommu domain
> * @map: map a physically contiguous memory region to an iommu domain
> * @map_pages: map a physically contiguous set of pages of the same size to
> * an iommu domain.
> @@ -282,6 +290,10 @@ struct iommu_ops {
> struct iommu_domain_ops {
> int (*attach_dev)(struct iommu_domain *domain, struct device *dev);
> void (*detach_dev)(struct iommu_domain *domain, struct device *dev);
> + int (*set_dev_pasid)(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid);
> + void (*block_dev_pasid)(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid);
>
> int (*map)(struct iommu_domain *domain, unsigned long iova,
> phys_addr_t paddr, size_t size, int prot, gfp_t gfp);
> @@ -677,6 +689,10 @@ int iommu_group_claim_dma_owner(struct iommu_group *group, void *owner);
> void iommu_group_release_dma_owner(struct iommu_group *group);
> bool iommu_group_dma_owner_claimed(struct iommu_group *group);
>
> +int iommu_set_device_pasid(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid);
> +void iommu_block_device_pasid(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid);
> #else /* CONFIG_IOMMU_API */
>
> struct iommu_ops {};
> @@ -1050,6 +1066,17 @@ static inline bool iommu_group_dma_owner_claimed(struct iommu_group *group)
> {
> return false;
> }
> +
> +static inline int iommu_set_device_pasid(struct iommu_domain *domain,
> + struct device *dev, ioasid_t pasid)
> +{
> + return -ENODEV;
> +}
> +
> +static inline void iommu_block_device_pasid(struct iommu_domain *domain,
> + struct device *dev, ioasid_t pasid)
> +{
> +}
> #endif /* CONFIG_IOMMU_API */
>
> /**
> @@ -1075,4 +1102,28 @@ void iommu_debugfs_setup(void);
> static inline void iommu_debugfs_setup(void) {}
> #endif
>
> +#ifdef CONFIG_IOMMU_SVA
> +struct iommu_domain *
> +iommu_sva_alloc_domain(struct bus_type *bus, struct mm_struct *mm);
> +void iommu_sva_free_domain(struct iommu_domain *domain);
> +int iommu_sva_set_domain(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid);
> +#else /* CONFIG_IOMMU_SVA */
> +static inline struct iommu_domain *
> +iommu_sva_alloc_domain(struct bus_type *bus, struct mm_struct *mm)
> +{
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static inline void iommu_sva_free_domain(struct iommu_domain *domain)
> +{
> +}
> +
> +static inline int iommu_sva_set_domain(struct iommu_domain *domain,
> + struct device *dev, ioasid_t pasid)
> +{
> + return -EINVAL;
> +}
> +#endif /* CONFIG_IOMMU_SVA */
> +
> #endif /* __LINUX_IOMMU_H */
> diff --git a/drivers/iommu/iommu-sva-lib.h b/drivers/iommu/iommu-sva-lib.h
> index 8909ea1094e3..1be21e6b93ec 100644
> +++ b/drivers/iommu/iommu-sva-lib.h
> @@ -7,6 +7,7 @@
>
> #include <linux/ioasid.h>
> #include <linux/mm_types.h>
> +#include <linux/iommu.h>
>
> int iommu_sva_alloc_pasid(struct mm_struct *mm, ioasid_t min, ioasid_t max);
> struct mm_struct *iommu_sva_find(ioasid_t pasid);
> @@ -16,6 +17,20 @@ struct device;
> struct iommu_fault;
> struct iopf_queue;
>
> +struct iommu_sva_domain {
> + struct iommu_domain domain;
> + struct mm_struct *mm;
> +};
> +
> +#define to_sva_domain(d) container_of_safe(d, struct iommu_sva_domain, domain)
> +
> +static inline struct mm_struct *domain_to_mm(struct iommu_domain *domain)
> +{
> + struct iommu_sva_domain *sva_domain = to_sva_domain(domain);
> +
> + return sva_domain->mm;
> +}
> +
> #ifdef CONFIG_IOMMU_SVA
> int iommu_queue_iopf(struct iommu_fault *fault, void *cookie);
>
> diff --git a/drivers/iommu/iommu-sva-lib.c b/drivers/iommu/iommu-sva-lib.c
> index 106506143896..210c376f6043 100644
> +++ b/drivers/iommu/iommu-sva-lib.c
> @@ -69,3 +69,51 @@ struct mm_struct *iommu_sva_find(ioasid_t pasid)
> return ioasid_find(&iommu_sva_pasid, pasid, __mmget_not_zero);
> }
> EXPORT_SYMBOL_GPL(iommu_sva_find);
> +
> +/*
> + * IOMMU SVA driver-oriented interfaces
> + */
> +struct iommu_domain *
> +iommu_sva_alloc_domain(struct bus_type *bus, struct mm_struct *mm)
This should return the proper type
> +{
> + struct iommu_sva_domain *sva_domain;
> + struct iommu_domain *domain;
> +
> + if (!bus->iommu_ops || !bus->iommu_ops->sva_domain_ops)
> + return ERR_PTR(-ENODEV);
> +
> + sva_domain = kzalloc(sizeof(*sva_domain), GFP_KERNEL);
> + if (!sva_domain)
> + return ERR_PTR(-ENOMEM);
> +
> + mmgrab(mm);
> + sva_domain->mm = mm;
> +
> + domain = &sva_domain->domain;
> + domain->type = IOMMU_DOMAIN_SVA;
> + domain->ops = bus->iommu_ops->sva_domain_ops;
> +
> + return domain;
> +}
> +
> +void iommu_sva_free_domain(struct iommu_domain *domain)
> +{
> + struct iommu_sva_domain *sva_domain = to_sva_domain(domain);
> +
> + mmdrop(sva_domain->mm);
> + kfree(sva_domain);
> +}
No callback to the driver?
> +int iommu_sva_set_domain(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid)
> +{
Why does this function exist? Just call iommu_set_device_pasid()
> +int iommu_set_device_pasid(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid)
> +{
Here you can continue to use attach/detach language as at this API
level we expect strict pairing..
> +void iommu_block_device_pasid(struct iommu_domain *domain, struct device *dev,
> + ioasid_t pasid)
> +{
> + struct iommu_group *group = iommu_group_get(dev);
> +
> + mutex_lock(&group->mutex);
> + domain->ops->block_dev_pasid(domain, dev, pasid);
> + xa_erase(&group->pasid_array, pasid);
> + mutex_unlock(&group->mutex);
Should be the blocking domain.
Jason
next prev parent reply other threads:[~2022-05-24 13:44 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-19 7:20 [PATCH v7 00/10] iommu: SVA and IOPF refactoring Lu Baolu
2022-05-19 7:20 ` [PATCH v7 01/10] iommu: Add pasids field in struct iommu_device Lu Baolu
2022-05-19 10:37 ` Jean-Philippe Brucker
2022-05-19 11:55 ` Baolu Lu
2022-05-24 9:24 ` Tian, Kevin
2022-05-25 2:03 ` Baolu Lu
2022-05-25 2:13 ` Baolu Lu
2022-05-19 7:20 ` [PATCH v7 02/10] iommu: Remove SVM_FLAG_SUPERVISOR_MODE support Lu Baolu
2022-05-19 16:22 ` Jean-Philippe Brucker
2022-05-24 9:27 ` Tian, Kevin
2022-05-19 7:20 ` [PATCH v7 03/10] iommu/sva: Add iommu_sva_domain support Lu Baolu
2022-05-19 16:33 ` Jean-Philippe Brucker
2022-05-20 4:55 ` Baolu Lu
2022-05-23 7:12 ` Baolu Lu
2022-05-24 9:44 ` Tian, Kevin
2022-05-25 2:18 ` Baolu Lu
2022-05-24 9:39 ` Tian, Kevin
2022-05-24 13:38 ` Jason Gunthorpe
2022-05-25 0:44 ` Tian, Kevin
2022-05-25 2:38 ` Baolu Lu
2022-05-25 4:50 ` Baolu Lu
2022-05-24 13:44 ` Jason Gunthorpe [this message]
2022-05-25 5:19 ` Baolu Lu
2022-05-25 15:25 ` Jason Gunthorpe
2022-05-26 1:03 ` Baolu Lu
2022-05-25 5:33 ` Baolu Lu
2022-05-24 14:36 ` Robin Murphy
2022-05-25 6:20 ` Baolu Lu
2022-05-25 10:07 ` Robin Murphy
2022-05-25 11:06 ` Jean-Philippe Brucker
2022-05-25 13:11 ` Baolu Lu
2022-05-19 7:20 ` [PATCH v7 04/10] iommu/vt-d: Add SVA domain support Lu Baolu
2022-05-19 7:20 ` [PATCH v7 05/10] arm-smmu-v3/sva: " Lu Baolu
2022-05-19 16:37 ` Jean-Philippe Brucker
2022-05-19 7:20 ` [PATCH v7 06/10] iommu/sva: Refactoring iommu_sva_bind/unbind_device() Lu Baolu
2022-05-19 16:39 ` Jean-Philippe Brucker
2022-05-20 6:38 ` Baolu Lu
2022-05-20 11:28 ` Jean-Philippe Brucker
2022-05-23 3:07 ` Baolu Lu
2022-05-24 10:22 ` Tian, Kevin
2022-05-24 10:57 ` Jean-Philippe Brucker
2022-05-25 2:04 ` Tian, Kevin
2022-05-25 7:29 ` Jean-Philippe Brucker
2022-06-02 6:46 ` Tian, Kevin
2022-05-19 7:20 ` [PATCH v7 07/10] iommu: Remove SVA related callbacks from iommu ops Lu Baolu
2022-05-24 10:23 ` Tian, Kevin
2022-05-19 7:20 ` [PATCH v7 08/10] iommu: Prepare IOMMU domain for IOPF Lu Baolu
2022-05-19 16:40 ` Jean-Philippe Brucker
2022-05-19 7:20 ` [PATCH v7 09/10] iommu: Per-domain I/O page fault handling Lu Baolu
2022-05-19 7:20 ` [PATCH v7 10/10] iommu: Rename iommu-sva-lib.{c,h} Lu Baolu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220524134440.GT1343366@nvidia.com \
--to=jgg@nvidia.com \
--cc=ashok.raj@intel.com \
--cc=baolu.lu@linux.intel.com \
--cc=dave.jiang@intel.com \
--cc=eric.auger@redhat.com \
--cc=hch@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jacob.jun.pan@intel.com \
--cc=jean-philippe@linaro.com \
--cc=jean-philippe@linaro.org \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox