The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Alexander Steffen <Alexander.Steffen@infineon.com>
To: <jarkko@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-integrity@vger.kernel.org>
Cc: Alexander Steffen <Alexander.Steffen@infineon.com>,
	<peterhuewe@gmx.de>, <jgg@ziepe.ca>,
	<krzysztof.kozlowski+dt@linaro.org>,
	Johannes Holland <johannes.holland@infineon.com>,
	Amir Mizinski <amirmizi6@gmail.com>
Subject: [PATCH v4 2/3] tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer
Date: Wed, 25 May 2022 18:58:48 +0200	[thread overview]
Message-ID: <20220525165849.7789-3-Alexander.Steffen@infineon.com> (raw)
In-Reply-To: <20220525165849.7789-1-Alexander.Steffen@infineon.com>

Some TPMs, e.g. those implementing the I2C variant of TIS, can verify
data transfers to/from the FIFO with a CRC. The CRC is calculated over
the entirety of the FIFO register. Since the phy_ops layer is not aware
when the core layer is done reading/writing the FIFO, CRC verification
must be triggered from the core layer. To this end, add an optional
phy_ops API call.

Co-developed-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com>
---
 drivers/char/tpm/tpm_tis_core.c | 14 ++++++++++++++
 drivers/char/tpm/tpm_tis_core.h | 10 ++++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c
index dc56b976d816..757623bacfd5 100644
--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -289,6 +289,7 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 	int size = 0;
 	int status;
 	u32 expected;
+	int rc;
 
 	if (count < TPM_HEADER_SIZE) {
 		size = -EIO;
@@ -328,6 +329,13 @@ static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		goto out;
 	}
 
+	rc = tpm_tis_verify_crc(priv, (size_t)size, buf);
+	if (rc < 0) {
+		dev_err(&chip->dev, "CRC mismatch for response.\n");
+		size = rc;
+		goto out;
+	}
+
 out:
 	tpm_tis_ready(chip);
 	return size;
@@ -443,6 +451,12 @@ static int tpm_tis_send_main(struct tpm_chip *chip, const u8 *buf, size_t len)
 	if (rc < 0)
 		return rc;
 
+	rc = tpm_tis_verify_crc(priv, len, buf);
+	if (rc < 0) {
+		dev_err(&chip->dev, "CRC mismatch for command.\n");
+		return rc;
+	}
+
 	/* go and do it */
 	rc = tpm_tis_write8(priv, TPM_STS(priv->locality), TPM_STS_GO);
 	if (rc < 0)
diff --git a/drivers/char/tpm/tpm_tis_core.h b/drivers/char/tpm/tpm_tis_core.h
index 6c203f36b8a1..66a5a13cd1df 100644
--- a/drivers/char/tpm/tpm_tis_core.h
+++ b/drivers/char/tpm/tpm_tis_core.h
@@ -121,6 +121,8 @@ struct tpm_tis_phy_ops {
 			  u8 *result, enum tpm_tis_io_mode mode);
 	int (*write_bytes)(struct tpm_tis_data *data, u32 addr, u16 len,
 			   const u8 *value, enum tpm_tis_io_mode mode);
+	int (*verify_crc)(struct tpm_tis_data *data, size_t len,
+			  const u8 *value);
 };
 
 static inline int tpm_tis_read_bytes(struct tpm_tis_data *data, u32 addr,
@@ -188,6 +190,14 @@ static inline int tpm_tis_write32(struct tpm_tis_data *data, u32 addr,
 	return rc;
 }
 
+static inline int tpm_tis_verify_crc(struct tpm_tis_data *data, size_t len,
+				     const u8 *value)
+{
+	if (!data->phy_ops->verify_crc)
+		return 0;
+	return data->phy_ops->verify_crc(data, len, value);
+}
+
 static inline bool is_bsw(void)
 {
 #ifdef CONFIG_X86
-- 
2.25.1


  parent reply	other threads:[~2022-05-25 16:59 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-25 16:58 [PATCH v4 0/3] tpm_tis_i2c Alexander Steffen
2022-05-25 16:58 ` [PATCH v4 1/3] dt-bindings: trivial-devices: Add two I2C TPM devices Alexander Steffen
2022-05-26 12:29   ` Krzysztof Kozlowski
2022-06-02 13:48     ` Rob Herring
2022-06-02 15:34       ` Alexander Steffen
2022-06-03 18:19         ` Rob Herring
2022-05-25 16:58 ` Alexander Steffen [this message]
2022-05-26  1:07   ` [PATCH v4 2/3] tpm: Add tpm_tis_verify_crc to the tpm_tis_phy_ops protocol layer Jarkko Sakkinen
2022-05-25 16:58 ` [PATCH v4 3/3] tpm: Add tpm_tis_i2c backend for tpm_tis_core Alexander Steffen
2022-05-26 12:31   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220525165849.7789-3-Alexander.Steffen@infineon.com \
    --to=alexander.steffen@infineon.com \
    --cc=amirmizi6@gmail.com \
    --cc=jarkko@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=johannes.holland@infineon.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-integrity@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peterhuewe@gmx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox