[PATCH AUTOSEL 4.14 01/14] ARM: dts: ox820: align interrupt controller node name with dtschema

[PATCH AUTOSEL 4.14 01/14] ARM: dts: ox820: align interrupt controller node name with dtschema

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit fbcd5ad7a419ad40644a0bb8b4152bc660172d8a ]

Fixes dtbs_check warnings like:

  gic@1000: $nodename:0: 'gic@1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220317115705.450427-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/ox820.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ox820.dtsi b/arch/arm/boot/dts/ox820.dtsi
index 8355cb034525..3382b1a9cac9 100644
--- a/arch/arm/boot/dts/ox820.dtsi
+++ b/arch/arm/boot/dts/ox820.dtsi
@@ -286,7 +286,7 @@ local-timer@600 {
 				clocks = <&armclk>;
 			};
 
-			gic: gic@1000 {
+			gic: interrupt-controller@1000 {
 				compatible = "arm,arm11mp-gic";
 				interrupt-controller;
 				#interrupt-cells = <3>;
-- 
2.35.1

[PATCH AUTOSEL 4.14 02/14] fs: jfs: fix possible NULL pointer dereference in dbFree()

[Sasha Levin]

From: Zixuan Fu <r33s3n6@gmail.com>

[ Upstream commit 0d4837fdb796f99369cf7691d33de1b856bcaf1f ]

In our fault-injection testing, the variable "nblocks" in dbFree() can be
zero when kmalloc_array() fails in dtSearch(). In this case, the variable
 "mp" in dbFree() would be NULL and then it is dereferenced in
"write_metapage(mp)".

The failure log is listed as follows:

[   13.824137] BUG: kernel NULL pointer dereference, address: 0000000000000020
...
[   13.827416] RIP: 0010:dbFree+0x5f7/0x910 [jfs]
[   13.834341] Call Trace:
[   13.834540]  <TASK>
[   13.834713]  txFreeMap+0x7b4/0xb10 [jfs]
[   13.835038]  txUpdateMap+0x311/0x650 [jfs]
[   13.835375]  jfs_lazycommit+0x5f2/0xc70 [jfs]
[   13.835726]  ? sched_dynamic_update+0x1b0/0x1b0
[   13.836092]  kthread+0x3c2/0x4a0
[   13.836355]  ? txLockFree+0x160/0x160 [jfs]
[   13.836763]  ? kthread_unuse_mm+0x160/0x160
[   13.837106]  ret_from_fork+0x1f/0x30
[   13.837402]  </TASK>
...

This patch adds a NULL check of "mp" before "write_metapage(mp)" is called.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jfs/jfs_dmap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c
index 6dac48e29d28..a07fbb60ac3c 100644
--- a/fs/jfs/jfs_dmap.c
+++ b/fs/jfs/jfs_dmap.c
@@ -398,7 +398,8 @@ int dbFree(struct inode *ip, s64 blkno, s64 nblocks)
 	}
 
 	/* write the last buffer. */
-	write_metapage(mp);
+	if (mp)
+		write_metapage(mp);
 
 	IREAD_UNLOCK(ipbmap);
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 03/14] ARM: OMAP1: clock: Fix UART rate reporting algorithm

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit 338d5d476cde853dfd97378d20496baabc2ce3c0 ]

Since its introduction to the mainline kernel, omap1_uart_recalc() helper
makes incorrect use of clk->enable_bit as a ready to use bitmap mask while
it only provides the bit number.  Fix it.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap1/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fa512413a471..b277409f303a 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -44,7 +44,7 @@ static DEFINE_SPINLOCK(clockfw_lock);
 unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
-	return val & clk->enable_bit ? 48000000 : 12000000;
+	return val & 1 << clk->enable_bit ? 48000000 : 12000000;
 }
 
 unsigned long omap1_sossi_recalc(struct clk *clk)
-- 
2.35.1

[PATCH AUTOSEL 4.14 04/14] selftests/resctrl: Change the default limited time to 120 seconds

[Sasha Levin]

From: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>

[ Upstream commit e2e3fb6ef0d6548defbe0be6e092397aaa92f3a1 ]

When testing on a Intel(R) Xeon(R) Gold 6254 CPU @ 3.10GHz the resctrl
selftests fail due to timeout after exceeding the default time limit of
45 seconds. On this system the test takes about 68 seconds.
Since the failing test by default accesses a fixed size of memory, the
execution time should not vary significantly between different environment.
A new default of 120 seconds should be sufficient yet easy to customize
with the introduction of the "settings" file for reference.

Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/resctrl/settings | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 tools/testing/selftests/resctrl/settings

diff --git a/tools/testing/selftests/resctrl/settings b/tools/testing/selftests/resctrl/settings
new file mode 100644
index 000000000000..a383f3d4565b
--- /dev/null
+++ b/tools/testing/selftests/resctrl/settings
@@ -0,0 +1,3 @@
+# If running time is longer than 120 seconds when new tests are added in
+# the future, increase timeout here.
+timeout=120
-- 
2.35.1

[PATCH AUTOSEL 4.14 05/14] fat: add ratelimit to fat*_ent_bread()

[Sasha Levin]

From: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

[ Upstream commit 183c3237c928109d2008c0456dff508baf692b20 ]

fat*_ent_bread() can be the cause of too many report on I/O error path.
So use fat_msg_ratelimit() instead.

Link: https://lkml.kernel.org/r/87bkxogfeq.fsf@mail.parknet.co.jp
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: qianfan <qianfanguijin@163.com>
Tested-by: qianfan <qianfanguijin@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fat/fatent.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c
index 24ed1f4e48ae..3ef3e773da1b 100644
--- a/fs/fat/fatent.c
+++ b/fs/fat/fatent.c
@@ -92,7 +92,8 @@ static int fat12_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 err_brelse:
 	brelse(bhs[0]);
 err:
-	fat_msg(sb, KERN_ERR, "FAT read failed (blocknr %llu)", (llu)blocknr);
+	fat_msg_ratelimit(sb, KERN_ERR, "FAT read failed (blocknr %llu)",
+			  (llu)blocknr);
 	return -EIO;
 }
 
@@ -105,8 +106,8 @@ static int fat_ent_bread(struct super_block *sb, struct fat_entry *fatent,
 	fatent->fat_inode = MSDOS_SB(sb)->fat_inode;
 	fatent->bhs[0] = sb_bread(sb, blocknr);
 	if (!fatent->bhs[0]) {
-		fat_msg(sb, KERN_ERR, "FAT read failed (blocknr %llu)",
-		       (llu)blocknr);
+		fat_msg_ratelimit(sb, KERN_ERR, "FAT read failed (blocknr %llu)",
+				  (llu)blocknr);
 		return -EIO;
 	}
 	fatent->nr_bhs = 1;
-- 
2.35.1

[PATCH AUTOSEL 4.14 06/14] ARM: versatile: Add missing of_node_put in dcscb_init

[Sasha Levin]

From: Peng Wu <wupeng58@huawei.com>

[ Upstream commit 23b44f9c649bbef10b45fa33080cd8b4166800ae ]

The device_node pointer is returned by of_find_compatible_node
with refcount incremented. We should use of_node_put() to avoid
the refcount leak.

Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220428230356.69418-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-vexpress/dcscb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c
index ee2a0faafaa1..aaade91f6551 100644
--- a/arch/arm/mach-vexpress/dcscb.c
+++ b/arch/arm/mach-vexpress/dcscb.c
@@ -146,6 +146,7 @@ static int __init dcscb_init(void)
 	if (!node)
 		return -ENODEV;
 	dcscb_base = of_iomap(node, 0);
+	of_node_put(node);
 	if (!dcscb_base)
 		return -EADDRNOTAVAIL;
 	cfg = readl_relaxed(dcscb_base + DCS_CFG_R);
-- 
2.35.1

[PATCH AUTOSEL 4.14 07/14] ARM: dts: exynos: add atmel,24c128 fallback to Samsung EEPROM

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit f038e8186fbc5723d7d38c6fa1d342945107347e ]

The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback,
according to the AT24 EEPROM bindings.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a3c4b9e03fbf..dc539a4eb27a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -128,7 +128,7 @@ &i2c_0 {
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
@@ -287,7 +287,7 @@ &i2c_1 {
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 08/14] ARM: hisi: Add missing of_node_put after of_find_compatible_node

[Sasha Levin]

From: Peng Wu <wupeng58@huawei.com>

[ Upstream commit 9bc72e47d4630d58a840a66a869c56b29554cfe4 ]

of_find_compatible_node  will increment the refcount of the returned
device_node. Calling of_node_put() to avoid the refcount leak

Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-hisi/platsmp.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index da5689ababf7..d7fbfb6d293d 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -70,14 +70,17 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
 		}
 		ctrl_base = of_iomap(np, 0);
 		if (!ctrl_base) {
+			of_node_put(np);
 			pr_err("failed to map address\n");
 			return;
 		}
 		if (of_property_read_u32(np, "smp-offset", &offset) < 0) {
+			of_node_put(np);
 			pr_err("failed to find smp-offset property\n");
 			return;
 		}
 		ctrl_base += offset;
+		of_node_put(np);
 	}
 }
 
@@ -163,6 +166,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	if (WARN_ON(!node))
 		return -1;
 	ctrl_base = of_iomap(node, 0);
+	of_node_put(node);
 
 	/* set the secondary core boot from DDR */
 	remap_reg_value = readl_relaxed(ctrl_base + REG_SC_CTRL);
-- 
2.35.1

[PATCH AUTOSEL 4.14 09/14] PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()

[Sasha Levin]

From: Yicong Yang <yangyicong@hisilicon.com>

[ Upstream commit a91ee0e9fca9d7501286cfbced9b30a33e52740a ]

The sysfs sriov_numvfs_store() path acquires the device lock before the
config space access lock:

  sriov_numvfs_store
    device_lock                 # A (1) acquire device lock
    sriov_configure
      vfio_pci_sriov_configure  # (for example)
        vfio_pci_core_sriov_configure
          pci_disable_sriov
            sriov_disable
              pci_cfg_access_lock
                pci_wait_cfg    # B (4) wait for dev->block_cfg_access == 0

Previously, pci_dev_lock() acquired the config space access lock before the
device lock:

  pci_dev_lock
    pci_cfg_access_lock
      dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1
    device_lock                 # A (3) wait for device lock

Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may
deadlock with sriov_numvfs_store() if the operations occur in the sequence
(1) (2) (3) (4).

Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires
the device lock before the config space access lock, the same as the
sriov_numvfs_store() path.

[bhelgaas: combined and adapted commit log from Jay Zhou's independent
subsequent posting:
https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com]
Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyicong@hisilicon.com/
Also-posted-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4ff7f2575d28..efcd06064953 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4153,18 +4153,18 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
 
 static void pci_dev_lock(struct pci_dev *dev)
 {
-	pci_cfg_access_lock(dev);
 	/* block PM suspend, driver probe, etc. */
 	device_lock(&dev->dev);
+	pci_cfg_access_lock(dev);
 }
 
 /* Return 1 on successful lock, 0 on contention */
 static int pci_dev_trylock(struct pci_dev *dev)
 {
-	if (pci_cfg_access_trylock(dev)) {
-		if (device_trylock(&dev->dev))
+	if (device_trylock(&dev->dev)) {
+		if (pci_cfg_access_trylock(dev))
 			return 1;
-		pci_cfg_access_unlock(dev);
+		device_unlock(&dev->dev);
 	}
 
 	return 0;
@@ -4172,8 +4172,8 @@ static int pci_dev_trylock(struct pci_dev *dev)
 
 static void pci_dev_unlock(struct pci_dev *dev)
 {
-	device_unlock(&dev->dev);
 	pci_cfg_access_unlock(dev);
+	device_unlock(&dev->dev);
 }
 
 static void pci_dev_save_and_disable(struct pci_dev *dev)
-- 
2.35.1

[PATCH AUTOSEL 4.14 10/14] tracing: incorrect isolate_mote_t cast in mm_vmscan_lru_isolate

[Sasha Levin]

From: Vasily Averin <vvs@openvz.org>

[ Upstream commit 2b132903de7124dd9a758be0c27562e91a510848 ]

Fixes following sparse warnings:

  CHECK   mm/vmscan.c
mm/vmscan.c: note: in included file (through
include/trace/trace_events.h, include/trace/define_trace.h,
include/trace/events/vmscan.h):
./include/trace/events/vmscan.h:281:1: sparse: warning:
 cast to restricted isolate_mode_t
./include/trace/events/vmscan.h:281:1: sparse: warning:
 restricted isolate_mode_t degrades to integer

Link: https://lkml.kernel.org/r/e85d7ff2-fd10-53f8-c24e-ba0458439c1b@openvz.org
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/vmscan.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/trace/events/vmscan.h b/include/trace/events/vmscan.h
index dc23cf032403..9553f6167e51 100644
--- a/include/trace/events/vmscan.h
+++ b/include/trace/events/vmscan.h
@@ -290,7 +290,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
 		__field(unsigned long, nr_scanned)
 		__field(unsigned long, nr_skipped)
 		__field(unsigned long, nr_taken)
-		__field(isolate_mode_t, isolate_mode)
+		__field(unsigned int, isolate_mode)
 		__field(int, lru)
 	),
 
@@ -301,7 +301,7 @@ TRACE_EVENT(mm_vmscan_lru_isolate,
 		__entry->nr_scanned = nr_scanned;
 		__entry->nr_skipped = nr_skipped;
 		__entry->nr_taken = nr_taken;
-		__entry->isolate_mode = isolate_mode;
+		__entry->isolate_mode = (__force unsigned int)isolate_mode;
 		__entry->lru = lru;
 	),
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 11/14] powerpc/xics: fix refcount leak in icp_opal_init()

[Sasha Levin]

From: Lv Ruyi <lv.ruyi@zte.com.cn>

[ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]

The of_find_compatible_node() function returns a node pointer with
refcount incremented, use of_node_put() on it when done.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/sysdev/xics/icp-opal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c
index c71d2ea42627..3c9dd871491e 100644
--- a/arch/powerpc/sysdev/xics/icp-opal.c
+++ b/arch/powerpc/sysdev/xics/icp-opal.c
@@ -199,6 +199,7 @@ int icp_opal_init(void)
 
 	printk("XICS: Using OPAL ICP fallbacks\n");
 
+	of_node_put(np);
 	return 0;
 }
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 12/14] macintosh/via-pmu: Fix build failure when CONFIG_INPUT is disabled

[Sasha Levin]

From: Finn Thain <fthain@linux-m68k.org>

[ Upstream commit 86ce436e30d86327c9f5260f718104ae7b21f506 ]

drivers/macintosh/via-pmu-event.o: In function `via_pmu_event':
via-pmu-event.c:(.text+0x44): undefined reference to `input_event'
via-pmu-event.c:(.text+0x68): undefined reference to `input_event'
via-pmu-event.c:(.text+0x94): undefined reference to `input_event'
via-pmu-event.c:(.text+0xb8): undefined reference to `input_event'
drivers/macintosh/via-pmu-event.o: In function `via_pmu_event_init':
via-pmu-event.c:(.init.text+0x20): undefined reference to `input_allocate_device'
via-pmu-event.c:(.init.text+0xc4): undefined reference to `input_register_device'
via-pmu-event.c:(.init.text+0xd4): undefined reference to `input_free_device'
make[1]: *** [Makefile:1155: vmlinux] Error 1
make: *** [Makefile:350: __build_one_by_one] Error 2

Don't call into the input subsystem unless CONFIG_INPUT is built-in.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5edbe76ce68227f71e09af4614cc4c1bd61c7ec8.1649326292.git.fthain@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/macintosh/Kconfig   | 4 ++++
 drivers/macintosh/Makefile  | 3 ++-
 drivers/macintosh/via-pmu.c | 2 +-
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 97a420c11eed..5e47d91da519 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -77,6 +77,10 @@ config ADB_PMU
 	  this device; you should do so if your machine is one of those
 	  mentioned above.
 
+config ADB_PMU_EVENT
+	def_bool y
+	depends on ADB_PMU && INPUT=y
+
 config ADB_PMU_LED
 	bool "Support for the Power/iBook front LED"
 	depends on ADB_PMU
diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile
index ee803638e595..ff099c7d4edd 100644
--- a/drivers/macintosh/Makefile
+++ b/drivers/macintosh/Makefile
@@ -12,7 +12,8 @@ obj-$(CONFIG_MAC_EMUMOUSEBTN)	+= mac_hid.o
 obj-$(CONFIG_INPUT_ADBHID)	+= adbhid.o
 obj-$(CONFIG_ANSLCD)		+= ans-lcd.o
 
-obj-$(CONFIG_ADB_PMU)		+= via-pmu.o via-pmu-event.o
+obj-$(CONFIG_ADB_PMU)		+= via-pmu.o
+obj-$(CONFIG_ADB_PMU_EVENT)	+= via-pmu-event.o
 obj-$(CONFIG_ADB_PMU_LED)	+= via-pmu-led.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= via-pmu-backlight.o
 obj-$(CONFIG_ADB_CUDA)		+= via-cuda.o
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index f6e040fcad9a..9d6828f49779 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -1440,7 +1440,7 @@ pmu_handle_data(unsigned char *data, int len)
 		pmu_pass_intr(data, len);
 		/* len == 6 is probably a bad check. But how do I
 		 * know what PMU versions send what events here? */
-		if (len == 6) {
+		if (IS_ENABLED(CONFIG_ADB_PMU_EVENT) && len == 6) {
 			via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
 			via_pmu_event(PMU_EVT_LID, data[1]&1);
 		}
-- 
2.35.1

[PATCH AUTOSEL 4.14 13/14] RDMA/hfi1: Prevent panic when SDMA is disabled

[Sasha Levin]

From: Douglas Miller <doug.miller@cornelisnetworks.com>

[ Upstream commit 629e052d0c98e46dde9f0824f0aa437f678d9b8f ]

If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to
hfi1_write_iter() will dereference a NULL pointer and panic. A typical
stack frame is:

  sdma_select_user_engine [hfi1]
  hfi1_user_sdma_process_request [hfi1]
  hfi1_write_iter [hfi1]
  do_iter_readv_writev
  do_iter_write
  vfs_writev
  do_writev
  do_syscall_64

The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with
EINVAL.

Link: https://lore.kernel.org/r/20220520183706.48973.79803.stgit@awfm-01.cornelisnetworks.com
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/file_ops.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c
index b3ab803bf8b1..7b8644610feb 100644
--- a/drivers/infiniband/hw/hfi1/file_ops.c
+++ b/drivers/infiniband/hw/hfi1/file_ops.c
@@ -424,6 +424,8 @@ static ssize_t hfi1_write_iter(struct kiocb *kiocb, struct iov_iter *from)
 	unsigned long dim = from->nr_segs;
 	int idx;
 
+	if (!HFI1_CAP_IS_KSET(SDMA))
+		return -EINVAL;
 	idx = srcu_read_lock(&fd->pq_srcu);
 	pq = srcu_dereference(fd->pq, &fd->pq_srcu);
 	if (!cq || !pq) {
-- 
2.35.1

[PATCH AUTOSEL 4.14 14/14] drm: fix EDID struct for old ARM OABI format

[Sasha Levin]

From: Linus Torvalds <torvalds@linux-foundation.org>

[ Upstream commit 47f15561b69e226bfc034e94ff6dbec51a4662af ]

When building the kernel for arm with the "-mabi=apcs-gnu" option, gcc
will force alignment of all structures and unions to a word boundary
(see also STRUCTURE_SIZE_BOUNDARY and the "-mstructure-size-boundary=XX"
option if you're a gcc person), even when the members of said structures
do not want or need said alignment.

This completely messes up the structure alignment of 'struct edid' on
those targets, because even though all the embedded structures are
marked with "__attribute__((packed))", the unions that contain them are
not.

This was exposed by commit f1e4c916f97f ("drm/edid: add EDID block count
and size helpers"), but the bug is pre-existing.  That commit just made
the structure layout problem cause a build failure due to the addition
of the

        BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH);

sanity check in drivers/gpu/drm/drm_edid.c:edid_block_data().

This legacy union alignment should probably not be used in the first
place, but we can fix the layout by adding the packed attribute to the
union entries even when each member is already packed and it shouldn't
matter in a sane build environment.

You can see this issue with a trivial test program:

  union {
	struct {
		char c[5];
	};
	struct {
		char d;
		unsigned e;
	} __attribute__((packed));
  } a = { "1234" };

where building this with a normal "gcc -S" will result in the expected
5-byte size of said union:

	.type	a, @object
	.size	a, 5

but with an ARM compiler and the old ABI:

    arm-linux-gnu-gcc -mabi=apcs-gnu -mfloat-abi=soft -S t.c

you get

	.type	a, %object
	.size	a, 8

instead, because even though each member of the union is packed, the
union itself still gets aligned.

This was reported by Sudip for the spear3xx_defconfig target.

Link: https://lore.kernel.org/lkml/YpCUzStDnSgQLNFN@debian/
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_edid.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h
index 267e0426c479..0262e32ab59e 100644
--- a/include/drm/drm_edid.h
+++ b/include/drm/drm_edid.h
@@ -115,7 +115,7 @@ struct detailed_data_monitor_range {
 			u8 supported_scalings;
 			u8 preferred_refresh;
 		} __attribute__((packed)) cvt;
-	} formula;
+	} __attribute__((packed)) formula;
 } __attribute__((packed));
 
 struct detailed_data_wpindex {
@@ -148,7 +148,7 @@ struct detailed_non_pixel {
 		struct detailed_data_wpindex color;
 		struct std_timing timings[6];
 		struct cvt_timing cvt[4];
-	} data;
+	} __attribute__((packed)) data;
 } __attribute__((packed));
 
 #define EDID_DETAIL_EST_TIMINGS 0xf7
@@ -166,7 +166,7 @@ struct detailed_timing {
 	union {
 		struct detailed_pixel_timing pixel_data;
 		struct detailed_non_pixel other_data;
-	} data;
+	} __attribute__((packed)) data;
 } __attribute__((packed));
 
 #define DRM_EDID_INPUT_SERRATION_VSYNC (1 << 0)
-- 
2.35.1