[PATCH 5.17 588/772] dmaengine: stm32-mdma: remove GISR1 register

Greg Kroah-Hartman
2022-06-07T21:32:09Z

From: Amelie Delaunay <amelie.delaunay@foss.st.com>

[ Upstream commit 9d6a2d92e450926c483e45eaf426080a19219f4e ]

GISR1 was described in a not up-to-date documentation when the stm32-mdma
driver has been developed. This register has not been added in reference
manual of STM32 SoC with MDMA, which have only 32 MDMA channels.
So remove it from stm32-mdma driver.

Fixes: a4ffb13c8946 ("dmaengine: Add STM32 MDMA driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20220504155322.121431-2-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/dma/stm32-mdma.c | 21 +++++----------------
1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c
index 6f57ff0e7b37..1e6bc22ddae9 100644
--- a/drivers/dma/stm32-mdma.c
+++ b/drivers/dma/stm32-mdma.c
@@ -34,7 +34,6 @@
#include "virt-dma.h"

#define STM32_MDMA_GISR0 0x0000 /* MDMA Int Status Reg 1 */
-#define STM32_MDMA_GISR1 0x0004 /* MDMA Int Status Reg 2 */

/* MDMA Channel x interrupt/status register */
#define STM32_MDMA_CISR(x) (0x40 + 0x40 * (x)) /* x = 0..62 */
@@ -168,7 +167,7 @@

#define STM32_MDMA_MAX_BUF_LEN 128
#define STM32_MDMA_MAX_BLOCK_LEN 65536
-#define STM32_MDMA_MAX_CHANNELS 63
+#define STM32_MDMA_MAX_CHANNELS 32
#define STM32_MDMA_MAX_REQUESTS 256
#define STM32_MDMA_MAX_BURST 128
#define STM32_MDMA_VERY_HIGH_PRIORITY 0x3
@@ -1322,21 +1321,11 @@ static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)

/* Find out which channel generates the interrupt */
status = readl_relaxed(dmadev->base + STM32_MDMA_GISR0);
- if (status) {
- id = __ffs(status);
- } else {
- status = readl_relaxed(dmadev->base + STM32_MDMA_GISR1);
- if (!status) {
- dev_dbg(mdma2dev(dmadev), "spurious it\n");
- return IRQ_NONE;
- }
- id = __ffs(status);
- /*
- * As GISR0 provides status for channel id from 0 to 31,
- * so GISR1 provides status for channel id from 32 to 62
- */
- id += 32;
+ if (!status) {
+ dev_dbg(mdma2dev(dmadev), "spurious it\n");
+ return IRQ_NONE;
}
+ id = __ffs(status);

chan = &dmadev->chan[id];
if (!chan) {
--
2.35.1