[PATCH 5.4 406/411] ixgbe: fix bcast packets Rx on VF after promisc removal

Greg Kroah-Hartman
2022-06-13T11:57:43Z

From: Olivier Matz <olivier.matz@6wind.com>

commit 803e9895ea2b0fe80bc85980ae2d7a7e44037914 upstream.

After a VF requested to remove the promiscuous flag on an interface, the
broadcast packets are not received anymore. This breaks some protocols
like ARP.

In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM
bit (Broadcast Accept) on promiscuous removal.

This flag is already set by default in ixgbe_set_vmolr() on VF reset.

Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode")
Cc: stable@vger.kernel.org
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -1157,9 +1157,9 @@ static int ixgbe_update_vf_xcast_mode(st

switch (xcast_mode) {
case IXGBEVF_XCAST_MODE_NONE:
- disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE |
+ disable = IXGBE_VMOLR_ROMPE |
IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;
- enable = 0;
+ enable = IXGBE_VMOLR_BAM;
break;
case IXGBEVF_XCAST_MODE_MULTI:
disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE;