[PATCH AUTOSEL 4.9 01/12] ASoC: cs42l52: Fix TLV scales for mixer controls

[PATCH AUTOSEL 4.9 01/12] ASoC: cs42l52: Fix TLV scales for mixer controls

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 8bf5aabf524eec61013e506f764a0b2652dc5665 ]

The datasheet specifies the range of the mixer volumes as between
-51.5dB and 12dB with a 0.5dB step. Update the TLVs for this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l52.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index 0d9c4a57301b..f733f6b42b53 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -141,7 +141,7 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0);
 
 static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
 
-static DECLARE_TLV_DB_SCALE(mix_tlv, -50, 50, 0);
+static DECLARE_TLV_DB_SCALE(mix_tlv, -5150, 50, 0);
 
 static DECLARE_TLV_DB_SCALE(beep_tlv, -56, 200, 0);
 
@@ -368,7 +368,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = {
 			      CS42L52_ADCB_VOL, 0, 0xA0, 0x78, ipd_tlv),
 	SOC_DOUBLE_R_SX_TLV("ADC Mixer Volume",
 			     CS42L52_ADCA_MIXER_VOL, CS42L52_ADCB_MIXER_VOL,
-				0, 0x19, 0x7F, ipd_tlv),
+				0, 0x19, 0x7F, mix_tlv),
 
 	SOC_DOUBLE("ADC Switch", CS42L52_ADC_MISC_CTL, 0, 1, 1, 0),
 
-- 
2.35.1

[PATCH AUTOSEL 4.9 02/12] ASoC: cs53l30: Correct number of volume levels on SX controls

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 7fbd6dd68127927e844912a16741016d432a0737 ]

This driver specified the maximum value rather than the number of volume
levels on the SX controls, this is incorrect, so correct them.

Reported-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs53l30.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/cs53l30.c b/sound/soc/codecs/cs53l30.c
index cb47fb595ff4..5a16020423fe 100644
--- a/sound/soc/codecs/cs53l30.c
+++ b/sound/soc/codecs/cs53l30.c
@@ -351,22 +351,22 @@ static const struct snd_kcontrol_new cs53l30_snd_controls[] = {
 	SOC_ENUM("ADC2 NG Delay", adc2_ng_delay_enum),
 
 	SOC_SINGLE_SX_TLV("ADC1A PGA Volume",
-		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC1A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC1B PGA Volume",
-		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC1B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC2A PGA Volume",
-		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC2A_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 	SOC_SINGLE_SX_TLV("ADC2B PGA Volume",
-		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x18, pga_tlv),
+		    CS53L30_ADC2B_AFE_CTL, 0, 0x34, 0x24, pga_tlv),
 
 	SOC_SINGLE_SX_TLV("ADC1A Digital Volume",
-		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC1A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC1B Digital Volume",
-		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC1B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC2A Digital Volume",
-		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC2A_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 	SOC_SINGLE_SX_TLV("ADC2B Digital Volume",
-		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x0C, dig_tlv),
+		    CS53L30_ADC2B_DIG_VOL, 0, 0xA0, 0x6C, dig_tlv),
 };
 
 static const struct snd_soc_dapm_widget cs53l30_dapm_widgets[] = {
-- 
2.35.1

[PATCH AUTOSEL 4.9 03/12] ASoC: cs42l52: Correct TLV for Bypass Volume

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit 91e90c712fade0b69cdff7cc6512f6099bd18ae5 ]

The Bypass Volume is accidentally using a -6dB minimum TLV rather than
the correct -60dB minimum. Add a new TLV to correct this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l52.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs42l52.c b/sound/soc/codecs/cs42l52.c
index f733f6b42b53..47f2439fd7b0 100644
--- a/sound/soc/codecs/cs42l52.c
+++ b/sound/soc/codecs/cs42l52.c
@@ -141,6 +141,8 @@ static DECLARE_TLV_DB_SCALE(mic_tlv, 1600, 100, 0);
 
 static DECLARE_TLV_DB_SCALE(pga_tlv, -600, 50, 0);
 
+static DECLARE_TLV_DB_SCALE(pass_tlv, -6000, 50, 0);
+
 static DECLARE_TLV_DB_SCALE(mix_tlv, -5150, 50, 0);
 
 static DECLARE_TLV_DB_SCALE(beep_tlv, -56, 200, 0);
@@ -355,7 +357,7 @@ static const struct snd_kcontrol_new cs42l52_snd_controls[] = {
 			      CS42L52_SPKB_VOL, 0, 0x40, 0xC0, hl_tlv),
 
 	SOC_DOUBLE_R_SX_TLV("Bypass Volume", CS42L52_PASSTHRUA_VOL,
-			      CS42L52_PASSTHRUB_VOL, 0, 0x88, 0x90, pga_tlv),
+			      CS42L52_PASSTHRUB_VOL, 0, 0x88, 0x90, pass_tlv),
 
 	SOC_DOUBLE("Bypass Mute", CS42L52_MISC_CTL, 4, 5, 1, 0),
 
-- 
2.35.1

[PATCH AUTOSEL 4.9 04/12] ASoC: cs42l56: Correct typo in minimum level for SX volume controls

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit a8928ada9b96944cadd8b65d191e33199fd38782 ]

A couple of the SX volume controls specify 0x84 as the lowest volume
value, however the correct value from the datasheet is 0x44. The
datasheet don't include spaces in the value it displays as binary so
this was almost certainly just a typo reading 1000100.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220602162119.3393857-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/cs42l56.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/cs42l56.c b/sound/soc/codecs/cs42l56.c
index a2535a7eb4bb..f9f8a9112ff8 100644
--- a/sound/soc/codecs/cs42l56.c
+++ b/sound/soc/codecs/cs42l56.c
@@ -405,9 +405,9 @@ static const struct snd_kcontrol_new cs42l56_snd_controls[] = {
 	SOC_DOUBLE("ADC Boost Switch", CS42L56_GAIN_BIAS_CTL, 3, 2, 1, 1),
 
 	SOC_DOUBLE_R_SX_TLV("Headphone Volume", CS42L56_HPA_VOLUME,
-			      CS42L56_HPB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+			      CS42L56_HPB_VOLUME, 0, 0x44, 0x48, hl_tlv),
 	SOC_DOUBLE_R_SX_TLV("LineOut Volume", CS42L56_LOA_VOLUME,
-			      CS42L56_LOB_VOLUME, 0, 0x84, 0x48, hl_tlv),
+			      CS42L56_LOB_VOLUME, 0, 0x44, 0x48, hl_tlv),
 
 	SOC_SINGLE_TLV("Bass Shelving Volume", CS42L56_TONE_CTL,
 			0, 0x00, 1, tone_tlv),
-- 
2.35.1

[PATCH AUTOSEL 4.9 05/12] ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

[Sasha Levin]

From: Sergey Shtylyov <s.shtylyov@omp.ru>

[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ]

In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...

Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/libata-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 35db918a1de5..42f0a592b5ab 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -6051,7 +6051,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 				      const struct ata_port_info * const * ppi,
 				      int n_ports)
 {
-	const struct ata_port_info *pi;
+	const struct ata_port_info *pi = &ata_dummy_port_info;
 	struct ata_host *host;
 	int i, j;
 
@@ -6059,7 +6059,7 @@ struct ata_host *ata_host_alloc_pinfo(struct device *dev,
 	if (!host)
 		return NULL;
 
-	for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
+	for (i = 0, j = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
 		if (ppi[j])
-- 
2.35.1

[PATCH AUTOSEL 4.9 06/12] ASoC: wm8962: Fix suspend while playing music

[Sasha Levin]

From: Adam Ford <aford173@gmail.com>

[ Upstream commit d1f5272c0f7d2e53c6f2480f46725442776f5f78 ]

If the audio CODEC is playing sound when the system is suspended,
it can be left in a state which throws the following error:

wm8962 3-001a: ASoC: error at soc_component_read_no_lock on wm8962.3-001a: -16

Once this error has occurred, the audio will not work again until rebooted.

Fix this by configuring SET_SYSTEM_SLEEP_PM_OPS.

Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220526182129.538472-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8962.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 0e8008d38161..d46881f96c16 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3861,6 +3861,7 @@ static int wm8962_runtime_suspend(struct device *dev)
 #endif
 
 static const struct dev_pm_ops wm8962_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
 	SET_RUNTIME_PM_OPS(wm8962_runtime_suspend, wm8962_runtime_resume, NULL)
 };
 
-- 
2.35.1

[PATCH AUTOSEL 4.9 07/12] scsi: vmw_pvscsi: Expand vcpuHint to 16 bits

[Sasha Levin]

From: Wentao Wang <wwentao@vmware.com>

[ Upstream commit cf71d59c2eceadfcde0fb52e237990a0909880d7 ]

vcpuHint has been expanded to 16 bit on host to enable routing to more
CPUs. Guest side should align with the change. This change has been tested
with hosts with 8-bit and 16-bit vcpuHint, on both platforms host side can
get correct value.

Link: https://lore.kernel.org/r/EF35F4D5-5DCC-42C5-BCC4-29DF1729B24C@vmware.com
Signed-off-by: Wentao Wang <wwentao@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/vmw_pvscsi.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h
index d41292ef85f2..98ad17cb6643 100644
--- a/drivers/scsi/vmw_pvscsi.h
+++ b/drivers/scsi/vmw_pvscsi.h
@@ -333,8 +333,8 @@ struct PVSCSIRingReqDesc {
 	u8	tag;
 	u8	bus;
 	u8	target;
-	u8	vcpuHint;
-	u8	unused[59];
+	u16	vcpuHint;
+	u8	unused[58];
 } __packed;
 
 /*
-- 
2.35.1

[PATCH AUTOSEL 4.9 08/12] scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 336d63615466b4c06b9401c987813fd19bdde39b ]

After issuing a LIP, a specific target vendor does not ACC the FLOGI that
lpfc sends.  However, it does send its own FLOGI that lpfc ACCs.  The
target then establishes the port IDs by sending a PLOGI.  lpfc PLOGI_ACCs
and starts the RPI registration for DID 0x000001.  The target then sends a
LOGO to the fabric DID.  lpfc is currently treating the LOGO from the
fabric DID as a link down and cleans up all the ndlps.  The ndlp for DID
0x000001 is put back into NPR and discovery stops, leaving the port in
stuck in bypassed mode.

Change lpfc behavior such that if a LOGO is received for the fabric DID in
PT2PT topology skip the lpfc_linkdown_port() routine and just move the
fabric DID back to NPR.

Link: https://lore.kernel.org/r/20220603174329.63777-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nportdisc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 30b5f65b29d1..7f230d0b2fd6 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -633,7 +633,8 @@ lpfc_rcv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	else
 		lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
 	if (ndlp->nlp_DID == Fabric_DID) {
-		if (vport->port_state <= LPFC_FDISC)
+		if (vport->port_state <= LPFC_FDISC ||
+		    vport->fc_flag & FC_PT2PT)
 			goto out;
 		lpfc_linkdown_port(vport);
 		spin_lock_irq(shost->host_lock);
-- 
2.35.1

[PATCH AUTOSEL 4.9 09/12] virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed

[Sasha Levin]

From: chengkaitao <pilgrimtao@gmail.com>

[ Upstream commit a58a7f97ba11391d2d0d408e0b24f38d86ae748e ]

The reference must be released when device_register(&vm_cmdline_parent)
failed. Add the corresponding 'put_device()' in the error handling path.

Signed-off-by: chengkaitao <pilgrimtao@gmail.com>
Message-Id: <20220602005542.16489-1-chengkaitao@didiglobal.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/virtio/virtio_mmio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c
index 50840984fbfa..f62da3b7c27b 100644
--- a/drivers/virtio/virtio_mmio.c
+++ b/drivers/virtio/virtio_mmio.c
@@ -630,6 +630,7 @@ static int vm_cmdline_set(const char *device,
 	if (!vm_cmdline_parent_registered) {
 		err = device_register(&vm_cmdline_parent);
 		if (err) {
+			put_device(&vm_cmdline_parent);
 			pr_err("Failed to register parent device!\n");
 			return err;
 		}
-- 
2.35.1

[PATCH AUTOSEL 4.9 10/12] nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred

[Sasha Levin]

From: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>

[ Upstream commit 8a4d480702b71184fabcf379b80bf7539716752e ]

Similar to the handling of play_deferred in commit 19cfe912c37b
("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought
a patch might be needed here as well.

Currently usb_submit_urb is called directly to submit deferred tx
urbs after unanchor them.

So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb
and cause memory leak.

Put those urbs in tx_anchor to avoid the leak, and also fix the error
handling.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/nfcmrvl/usb.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c
index 585a0f20835b..3263e2a2bdfd 100644
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -401,13 +401,25 @@ static void nfcmrvl_play_deferred(struct nfcmrvl_usb_drv_data *drv_data)
 	int err;
 
 	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		usb_anchor_urb(urb, &drv_data->tx_anchor);
+
 		err = usb_submit_urb(urb, GFP_ATOMIC);
-		if (err)
+		if (err) {
+			kfree(urb->setup_packet);
+			usb_unanchor_urb(urb);
+			usb_free_urb(urb);
 			break;
+		}
 
 		drv_data->tx_in_flight++;
+		usb_free_urb(urb);
+	}
+
+	/* Cleanup the rest deferred urbs. */
+	while ((urb = usb_get_from_anchor(&drv_data->deferred))) {
+		kfree(urb->setup_packet);
+		usb_free_urb(urb);
 	}
-	usb_scuttle_anchored_urbs(&drv_data->deferred);
 }
 
 static int nfcmrvl_resume(struct usb_interface *intf)
-- 
2.35.1

[PATCH AUTOSEL 4.9 11/12] ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg

[Sasha Levin]

From: Wang Yufen <wangyufen@huawei.com>

[ Upstream commit f638a84afef3dfe10554c51820c16e39a278c915 ]

When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be
overflow. To fix, we can follow what udpv6 does and subtract the
transhdrlen from the max.

Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/l2tp/l2tp_ip6.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c
index 76ef758db112..e412020029df 100644
--- a/net/l2tp/l2tp_ip6.c
+++ b/net/l2tp/l2tp_ip6.c
@@ -518,14 +518,15 @@ static int l2tp_ip6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	struct ipcm6_cookie ipc6;
 	int addr_len = msg->msg_namelen;
 	int transhdrlen = 4; /* zero session-id */
-	int ulen = len + transhdrlen;
+	int ulen;
 	int err;
 
 	/* Rough check on arithmetic overflow,
 	   better check is made in ip6_append_data().
 	 */
-	if (len > INT_MAX)
+	if (len > INT_MAX - transhdrlen)
 		return -EMSGSIZE;
+	ulen = len + transhdrlen;
 
 	/* Mirror BSD error message compatibility */
 	if (msg->msg_flags & MSG_OOB)
-- 
2.35.1

[PATCH AUTOSEL 4.9 12/12] net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag

[Sasha Levin]

From: Chen Lin <chen45464546@163.com>

[ Upstream commit 2f2c0d2919a14002760f89f4e02960c735a316d2 ]

When rx_flag == MTK_RX_FLAGS_HWLRO,
rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE.
netdev_alloc_frag is for alloction of page fragment only.
Reference to other drivers and Documentation/vm/page_frags.rst

Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE.

Signed-off-by: Chen Lin <chen45464546@163.com>
Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 5b072bf80783..4d3ce600e7c7 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -527,6 +527,17 @@ static inline void mtk_rx_get_desc(struct mtk_rx_dma *rxd,
 	rxd->rxd4 = READ_ONCE(dma_rxd->rxd4);
 }
 
+static void *mtk_max_lro_buf_alloc(gfp_t gfp_mask)
+{
+	unsigned int size = mtk_max_frag_size(MTK_MAX_LRO_RX_LENGTH);
+	unsigned long data;
+
+	data = __get_free_pages(gfp_mask | __GFP_COMP | __GFP_NOWARN,
+				get_order(size));
+
+	return (void *)data;
+}
+
 /* the qdma core needs scratch memory to be setup */
 static int mtk_init_fq_dma(struct mtk_eth *eth)
 {
@@ -928,7 +939,10 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
 			goto release_desc;
 
 		/* alloc new buffer */
-		new_data = napi_alloc_frag(ring->frag_size);
+		if (ring->frag_size <= PAGE_SIZE)
+			new_data = napi_alloc_frag(ring->frag_size);
+		else
+			new_data = mtk_max_lro_buf_alloc(GFP_ATOMIC);
 		if (unlikely(!new_data)) {
 			netdev->stats.rx_dropped++;
 			goto release_desc;
@@ -1231,7 +1245,10 @@ static int mtk_rx_alloc(struct mtk_eth *eth, int ring_no, int rx_flag)
 		return -ENOMEM;
 
 	for (i = 0; i < rx_dma_size; i++) {
-		ring->data[i] = netdev_alloc_frag(ring->frag_size);
+		if (ring->frag_size <= PAGE_SIZE)
+			ring->data[i] = netdev_alloc_frag(ring->frag_size);
+		else
+			ring->data[i] = mtk_max_lro_buf_alloc(GFP_KERNEL);
 		if (!ring->data[i])
 			return -ENOMEM;
 	}
-- 
2.35.1