[PATCH 5.10 82/84] igc: Enable PCIe PTM

Greg Kroah-Hartman
2022-06-20T13:18:06Z

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

commit 1b5d73fb862414106cf270a1a7300ce8ae77de83 upstream.

Enables PCIe PTM (Precision Time Measurement) support in the igc
driver. Notifies the PCI devices that PCIe PTM should be enabled.

PCIe PTM is similar protocol to PTP (Precision Time Protocol) running
in the PCIe fabric, it allows devices to report time measurements from
their internal clocks and the correlation with the PCIe root clock.

The i225 NIC exposes some registers that expose those time
measurements, those registers will be used, in later patches, to
implement the PTP_SYS_OFFSET_PRECISE ioctl().

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/intel/igc/igc_main.c | 5 +++++
1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -9,6 +9,7 @@
#include <linux/udp.h>
#include <linux/ip.h>
#include <linux/pm_runtime.h>
+#include <linux/pci.h>
#include <net/pkt_sched.h>

#include <net/ipv6.h>
@@ -5041,6 +5042,10 @@ static int igc_probe(struct pci_dev *pde

pci_enable_pcie_error_reporting(pdev);

+ err = pci_enable_ptm(pdev, NULL);
+ if (err < 0)
+ dev_info(&pdev->dev, "PCIe PTM not supported by PCIe bus/controller\n");
+
pci_set_master(pdev);

err = -ENOMEM;