[PATCH] ARM: dts: imx6qdl-prti6q.dtsi: Add applicable properties to usdhc3

Robin van der Gracht
2022-06-21T14:19:40Z

The usdhc3 interface is connected to a soldered eMMC chip on all boards
that import this dtsi. Adding these properties speeds up the device probe
during boot.

Signed-off-by: Robin van der Gracht <robin@protonic.nl>
---
arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
index 19578f660b09..f0db0d4471f4 100644
--- a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -94,6 +94,9 @@ &usdhc3 {
pinctrl-0 = <&pinctrl_usdhc3>;
bus-width = <8>;
non-removable;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
status = "okay";
};

--
2.34.1