From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Daniel Vetter <daniel.vetter@ffwll.ch>,
Christoph Hellwig <hch@lst.de>, Jessica Yu <jeyu@kernel.org>
Subject: [PATCH 5.10 02/12] drm: remove drm_fb_helper_modinit
Date: Thu, 30 Jun 2022 15:47:07 +0200 [thread overview]
Message-ID: <20220630133230.753964438@linuxfoundation.org> (raw)
In-Reply-To: <20220630133230.676254336@linuxfoundation.org>
From: Christoph Hellwig <hch@lst.de>
commit bf22c9ec39da90ce866d5f625d616f28bc733dc1 upstream.
drm_fb_helper_modinit has a lot of boilerplate for what is not very
simple functionality. Just open code it in the only caller using
IS_ENABLED and IS_MODULE, and skip the find_module check as a
request_module is harmless if the module is already loaded (and not
other caller has this find_module check either).
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/drm_crtc_helper_internal.h | 10 ----------
drivers/gpu/drm/drm_fb_helper.c | 21 ---------------------
drivers/gpu/drm/drm_kms_helper_common.c | 23 +++++++++++------------
3 files changed, 11 insertions(+), 43 deletions(-)
--- a/drivers/gpu/drm/drm_crtc_helper_internal.h
+++ b/drivers/gpu/drm/drm_crtc_helper_internal.h
@@ -32,16 +32,6 @@
#include <drm/drm_encoder.h>
#include <drm/drm_modes.h>
-/* drm_fb_helper.c */
-#ifdef CONFIG_DRM_FBDEV_EMULATION
-int drm_fb_helper_modinit(void);
-#else
-static inline int drm_fb_helper_modinit(void)
-{
- return 0;
-}
-#endif
-
/* drm_dp_aux_dev.c */
#ifdef CONFIG_DRM_DP_AUX_CHARDEV
int drm_dp_aux_dev_init(void);
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -2271,24 +2271,3 @@ void drm_fbdev_generic_setup(struct drm_
drm_client_register(&fb_helper->client);
}
EXPORT_SYMBOL(drm_fbdev_generic_setup);
-
-/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
- * but the module doesn't depend on any fb console symbols. At least
- * attempt to load fbcon to avoid leaving the system without a usable console.
- */
-int __init drm_fb_helper_modinit(void)
-{
-#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
- const char name[] = "fbcon";
- struct module *fbcon;
-
- mutex_lock(&module_mutex);
- fbcon = find_module(name);
- mutex_unlock(&module_mutex);
-
- if (!fbcon)
- request_module_nowait(name);
-#endif
- return 0;
-}
-EXPORT_SYMBOL(drm_fb_helper_modinit);
--- a/drivers/gpu/drm/drm_kms_helper_common.c
+++ b/drivers/gpu/drm/drm_kms_helper_common.c
@@ -64,19 +64,18 @@ MODULE_PARM_DESC(edid_firmware,
static int __init drm_kms_helper_init(void)
{
- int ret;
+ /*
+ * The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
+ * but the module doesn't depend on any fb console symbols. At least
+ * attempt to load fbcon to avoid leaving the system without a usable
+ * console.
+ */
+ if (IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) &&
+ IS_MODULE(CONFIG_FRAMEBUFFER_CONSOLE) &&
+ !IS_ENABLED(CONFIG_EXPERT))
+ request_module_nowait("fbcon");
- /* Call init functions from specific kms helpers here */
- ret = drm_fb_helper_modinit();
- if (ret < 0)
- goto out;
-
- ret = drm_dp_aux_dev_init();
- if (ret < 0)
- goto out;
-
-out:
- return ret;
+ return drm_dp_aux_dev_init();
}
static void __exit drm_kms_helper_exit(void)
next prev parent reply other threads:[~2022-06-30 14:07 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 13:47 [PATCH 5.10 00/12] 5.10.128-rc1 review Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 01/12] MAINTAINERS: add Amir as xfs maintainer for 5.10.y Greg Kroah-Hartman
2022-06-30 13:47 ` Greg Kroah-Hartman [this message]
2022-06-30 13:47 ` [PATCH 5.10 03/12] tick/nohz: unexport __init-annotated tick_nohz_full_setup() Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 04/12] clocksource/drivers/ixp4xx: remove __init from ixp4xx_timer_setup() Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 05/12] bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init() Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 06/12] xfs: use kmem_cache_free() for kmem_cache objects Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 07/12] xfs: punch out data fork delalloc blocks on COW writeback failure Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 08/12] xfs: Fix the free logic of state in xfs_attr_node_hasname Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 09/12] xfs: remove all COW fork extents when remounting readonly Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 10/12] xfs: check sb_meta_uuid for dabuf buffer recovery Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 11/12] powerpc/ftrace: Remove ftrace init tramp once kernel init is complete Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 5.10 12/12] net: mscc: ocelot: allow unregistered IP multicast flooding Greg Kroah-Hartman
2022-06-30 23:03 ` [PATCH 5.10 00/12] 5.10.128-rc1 review Florian Fainelli
2022-06-30 23:15 ` Shuah Khan
2022-07-01 0:57 ` Guenter Roeck
2022-07-01 3:16 ` Samuel Zou
2022-07-01 6:23 ` Naresh Kamboju
2022-07-01 10:34 ` Sudip Mukherjee
2022-07-01 18:47 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220630133230.753964438@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=daniel.vetter@ffwll.ch \
--cc=hch@lst.de \
--cc=jeyu@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox