From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Yonglin Tan <yonglin.tan@outlook.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.14 07/35] USB: serial: option: add Quectel EM05-G modem
Date: Thu, 30 Jun 2022 15:46:18 +0200 [thread overview]
Message-ID: <20220630133232.657579575@linuxfoundation.org> (raw)
In-Reply-To: <20220630133232.433955678@linuxfoundation.org>
From: Yonglin Tan <yonglin.tan@outlook.com>
commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream.
The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:
"RMNET" : AT + DIAG + NMEA + Modem + QMI
"MBIM" : MBIM + AT + DIAG + NMEA + Modem
The detailed description of the USB configuration for each mode as follows:
RMNET Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030a Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
MBIM Mode
--------------
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=030a Rev= 3.18
S: Manufacturer=Quectel
S: Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -255,6 +255,7 @@ static void option_instat_callback(struc
#define QUECTEL_PRODUCT_EG95 0x0195
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
+#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
@@ -1137,6 +1138,8 @@ static const struct usb_device_id option
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
next prev parent reply other threads:[~2022-06-30 13:56 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 13:46 [PATCH 4.14 00/35] 4.14.286-rc1 review Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 01/35] vt: drop old FONT ioctls Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 02/35] random: schedule mix_interrupt_randomness() less often Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 03/35] ata: libata: add qc->flags in ata_qc_complete_template tracepoint Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 04/35] dm era: commit metadata in postsuspend after worker stops Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 05/35] random: quiet urandom warning ratelimit suppression message Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 06/35] USB: serial: option: add Telit LE910Cx 0x1250 composition Greg Kroah-Hartman
2022-06-30 13:46 ` Greg Kroah-Hartman [this message]
2022-06-30 13:46 ` [PATCH 4.14 08/35] USB: serial: option: add Quectel RM500K module support Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 09/35] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 10/35] x86/xen: Remove undefined behavior in setup_features() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 11/35] MIPS: Remove repetitive increase irq_err_count Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 12/35] igb: Make DMA faster when CPU is active on the PCIe link Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 13/35] iio: adc: vf610: fix conversion mode sysfs node name Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 14/35] usb: chipidea: udc: check request status before setting device address Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 15/35] iio:accel:bma180: rearrange iio trigger get and register Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 16/35] iio: accel: mma8452: ignore the return value of reset operation Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 17/35] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 18/35] iio: trigger: sysfs: fix use-after-free on remove Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 19/35] iio: adc: axp288: Override TS pin bias current for some models Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 20/35] xtensa: xtfpga: Fix refcount leak bug in setup Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 21/35] xtensa: Fix refcount leak bug in time.c Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 22/35] powerpc: Enable execve syscall exit tracepoint Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 23/35] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 24/35] powerpc/powernv: wire up rng during setup_arch Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 25/35] ARM: dts: imx6qdl: correct PU regulator ramp delay Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 26/35] ARM: exynos: Fix refcount leak in exynos_map_pmu Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 27/35] ARM: Fix refcount leak in axxia_boot_secondary Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 28/35] ARM: cns3xxx: Fix refcount leak in cns3xxx_init Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 29/35] modpost: fix section mismatch check for exported init/exit sections Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 30/35] powerpc/pseries: wire up rng during setup_arch() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 31/35] drm: remove drm_fb_helper_modinit Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 32/35] xen: unexport __init-annotated xen_xlate_map_ballooned_pages() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 33/35] fdt: Update CRC check for rng-seed Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 34/35] kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add] Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.14 35/35] swiotlb: skip swiotlb_bounce when orig_addr is zero Greg Kroah-Hartman
2022-07-01 0:56 ` [PATCH 4.14 00/35] 4.14.286-rc1 review Guenter Roeck
2022-07-01 8:21 ` Naresh Kamboju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220630133232.657579575@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=yonglin.tan@outlook.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox