public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Yonglin Tan <yonglin.tan@outlook.com>,
	Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.19 10/49] USB: serial: option: add Quectel EM05-G modem
Date: Thu, 30 Jun 2022 15:46:23 +0200	[thread overview]
Message-ID: <20220630133234.209101806@linuxfoundation.org> (raw)
In-Reply-To: <20220630133233.910803744@linuxfoundation.org>

From: Yonglin Tan <yonglin.tan@outlook.com>

commit 33b29dbb39bcbd0a96e440646396bbf670b914fa upstream.

The EM05-G modem has 2 USB configurations that are configurable via the AT
command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with
the following interfaces, respectively:

"RMNET"	: AT + DIAG + NMEA + Modem + QMI
"MBIM"	: MBIM + AT + DIAG + NMEA + Modem

The detailed description of the USB configuration for each mode as follows:

RMNET Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030a Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

MBIM Mode
--------------
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030a Rev= 3.18
S:  Manufacturer=Quectel
S:  Product=Quectel EM05-G
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -252,6 +252,7 @@ static void option_instat_callback(struc
 #define QUECTEL_PRODUCT_EG95			0x0195
 #define QUECTEL_PRODUCT_BG96			0x0296
 #define QUECTEL_PRODUCT_EP06			0x0306
+#define QUECTEL_PRODUCT_EM05G			0x030a
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
@@ -1134,6 +1135,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
+	  .driver_info = RSVD(6) | ZLP },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },



  parent reply	other threads:[~2022-06-30 13:59 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-30 13:46 [PATCH 4.19 00/49] 4.19.250-rc1 review Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 01/49] vt: drop old FONT ioctls Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 02/49] random: schedule mix_interrupt_randomness() less often Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 03/49] ALSA: hda/via: Fix missing beep setup Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 04/49] ALSA: hda/conexant: " Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 05/49] ALSA: hda/realtek: Add quirk for Clevo PD70PNT Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 06/49] ata: libata: add qc->flags in ata_qc_complete_template tracepoint Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 07/49] dm era: commit metadata in postsuspend after worker stops Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 08/49] random: quiet urandom warning ratelimit suppression message Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 09/49] USB: serial: option: add Telit LE910Cx 0x1250 composition Greg Kroah-Hartman
2022-06-30 13:46 ` Greg Kroah-Hartman [this message]
2022-06-30 13:46 ` [PATCH 4.19 11/49] USB: serial: option: add Quectel RM500K module support Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 12/49] bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 13/49] net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 14/49] erspan: do not assume transport header is always set Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 15/49] x86/xen: Remove undefined behavior in setup_features() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 16/49] MIPS: Remove repetitive increase irq_err_count Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 17/49] afs: Fix dynamic root getattr Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 18/49] igb: Make DMA faster when CPU is active on the PCIe link Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 19/49] virtio_net: fix xdp_rxq_info bug after suspend/resume Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 20/49] gpio: winbond: Fix error code in winbond_gpio_get() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 21/49] iio: adc: vf610: fix conversion mode sysfs node name Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 22/49] xhci: turn off port power in shutdown Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 23/49] usb: chipidea: udc: check request status before setting device address Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 24/49] iio:chemical:ccs811: rearrange iio trigger get and register Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 25/49] iio:accel:bma180: " Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 26/49] iio: accel: mma8452: ignore the return value of reset operation Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 27/49] iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 28/49] iio: trigger: sysfs: fix use-after-free on remove Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 29/49] iio: adc: axp288: Override TS pin bias current for some models Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 30/49] xtensa: xtfpga: Fix refcount leak bug in setup Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 31/49] xtensa: Fix refcount leak bug in time.c Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 32/49] powerpc: Enable execve syscall exit tracepoint Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 33/49] powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 34/49] powerpc/powernv: wire up rng during setup_arch Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 35/49] ARM: dts: imx6qdl: correct PU regulator ramp delay Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 36/49] ARM: exynos: Fix refcount leak in exynos_map_pmu Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 37/49] soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 38/49] ARM: Fix refcount leak in axxia_boot_secondary Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 39/49] ARM: cns3xxx: Fix refcount leak in cns3xxx_init Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 40/49] modpost: fix section mismatch check for exported init/exit sections Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 41/49] kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 42/49] powerpc/pseries: wire up rng during setup_arch() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 43/49] drm: remove drm_fb_helper_modinit Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 44/49] xen: unexport __init-annotated xen_xlate_map_ballooned_pages() Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 45/49] fdt: Update CRC check for rng-seed Greg Kroah-Hartman
2022-06-30 13:46 ` [PATCH 4.19 46/49] kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add] Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 4.19 47/49] net: mscc: ocelot: allow unregistered IP multicast flooding Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 4.19 48/49] net/sched: move NULL ptr check to qdisc_put() too Greg Kroah-Hartman
2022-06-30 13:47 ` [PATCH 4.19 49/49] swiotlb: skip swiotlb_bounce when orig_addr is zero Greg Kroah-Hartman
2022-06-30 23:08 ` [PATCH 4.19 00/49] 4.19.250-rc1 review Shuah Khan
2022-07-01  0:56 ` Guenter Roeck
2022-07-01  7:42 ` Naresh Kamboju
2022-07-01 10:38 ` Sudip Mukherjee
2022-07-01 18:46 ` Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220630133234.209101806@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=yonglin.tan@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox