From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Harald Freudenberger <freude@linux.ibm.com>,
Ingo Franzki <ifranzki@linux.ibm.com>,
Juergen Christ <jchrist@linux.ibm.com>,
Heiko Carstens <hca@linux.ibm.com>,
"Jason A. Donenfeld" <Jason@zx2c4.com>,
Alexander Gordeev <agordeev@linux.ibm.com>
Subject: [PATCH 5.4 07/58] s390/archrandom: simplify back to earlier design and initialize earlier
Date: Tue, 5 Jul 2022 13:57:43 +0200 [thread overview]
Message-ID: <20220705115610.461671736@linuxfoundation.org> (raw)
In-Reply-To: <20220705115610.236040773@linuxfoundation.org>
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream.
s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.
Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.
Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.
So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().
Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().
Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/crypto/arch_random.c | 111 -------------------------------------
arch/s390/include/asm/archrandom.h | 21 ++++---
arch/s390/kernel/setup.c | 5 +
3 files changed, 18 insertions(+), 119 deletions(-)
--- a/arch/s390/crypto/arch_random.c
+++ b/arch/s390/crypto/arch_random.c
@@ -2,126 +2,17 @@
/*
* s390 arch random implementation.
*
- * Copyright IBM Corp. 2017, 2018
+ * Copyright IBM Corp. 2017, 2020
* Author(s): Harald Freudenberger
- *
- * The s390_arch_random_generate() function may be called from random.c
- * in interrupt context. So this implementation does the best to be very
- * fast. There is a buffer of random data which is asynchronously checked
- * and filled by a workqueue thread.
- * If there are enough bytes in the buffer the s390_arch_random_generate()
- * just delivers these bytes. Otherwise false is returned until the
- * worker thread refills the buffer.
- * The worker fills the rng buffer by pulling fresh entropy from the
- * high quality (but slow) true hardware random generator. This entropy
- * is then spread over the buffer with an pseudo random generator PRNG.
- * As the arch_get_random_seed_long() fetches 8 bytes and the calling
- * function add_interrupt_randomness() counts this as 1 bit entropy the
- * distribution needs to make sure there is in fact 1 bit entropy contained
- * in 8 bytes of the buffer. The current values pull 32 byte entropy
- * and scatter this into a 2048 byte buffer. So 8 byte in the buffer
- * will contain 1 bit of entropy.
- * The worker thread is rescheduled based on the charge level of the
- * buffer but at least with 500 ms delay to avoid too much CPU consumption.
- * So the max. amount of rng data delivered via arch_get_random_seed is
- * limited to 4k bytes per second.
*/
#include <linux/kernel.h>
#include <linux/atomic.h>
#include <linux/random.h>
-#include <linux/slab.h>
#include <linux/static_key.h>
-#include <linux/workqueue.h>
#include <asm/cpacf.h>
DEFINE_STATIC_KEY_FALSE(s390_arch_random_available);
atomic64_t s390_arch_random_counter = ATOMIC64_INIT(0);
EXPORT_SYMBOL(s390_arch_random_counter);
-
-#define ARCH_REFILL_TICKS (HZ/2)
-#define ARCH_PRNG_SEED_SIZE 32
-#define ARCH_RNG_BUF_SIZE 2048
-
-static DEFINE_SPINLOCK(arch_rng_lock);
-static u8 *arch_rng_buf;
-static unsigned int arch_rng_buf_idx;
-
-static void arch_rng_refill_buffer(struct work_struct *);
-static DECLARE_DELAYED_WORK(arch_rng_work, arch_rng_refill_buffer);
-
-bool s390_arch_random_generate(u8 *buf, unsigned int nbytes)
-{
- /* max hunk is ARCH_RNG_BUF_SIZE */
- if (nbytes > ARCH_RNG_BUF_SIZE)
- return false;
-
- /* lock rng buffer */
- if (!spin_trylock(&arch_rng_lock))
- return false;
-
- /* try to resolve the requested amount of bytes from the buffer */
- arch_rng_buf_idx -= nbytes;
- if (arch_rng_buf_idx < ARCH_RNG_BUF_SIZE) {
- memcpy(buf, arch_rng_buf + arch_rng_buf_idx, nbytes);
- atomic64_add(nbytes, &s390_arch_random_counter);
- spin_unlock(&arch_rng_lock);
- return true;
- }
-
- /* not enough bytes in rng buffer, refill is done asynchronously */
- spin_unlock(&arch_rng_lock);
-
- return false;
-}
-EXPORT_SYMBOL(s390_arch_random_generate);
-
-static void arch_rng_refill_buffer(struct work_struct *unused)
-{
- unsigned int delay = ARCH_REFILL_TICKS;
-
- spin_lock(&arch_rng_lock);
- if (arch_rng_buf_idx > ARCH_RNG_BUF_SIZE) {
- /* buffer is exhausted and needs refill */
- u8 seed[ARCH_PRNG_SEED_SIZE];
- u8 prng_wa[240];
- /* fetch ARCH_PRNG_SEED_SIZE bytes of entropy */
- cpacf_trng(NULL, 0, seed, sizeof(seed));
- /* blow this entropy up to ARCH_RNG_BUF_SIZE with PRNG */
- memset(prng_wa, 0, sizeof(prng_wa));
- cpacf_prno(CPACF_PRNO_SHA512_DRNG_SEED,
- &prng_wa, NULL, 0, seed, sizeof(seed));
- cpacf_prno(CPACF_PRNO_SHA512_DRNG_GEN,
- &prng_wa, arch_rng_buf, ARCH_RNG_BUF_SIZE, NULL, 0);
- arch_rng_buf_idx = ARCH_RNG_BUF_SIZE;
- }
- delay += (ARCH_REFILL_TICKS * arch_rng_buf_idx) / ARCH_RNG_BUF_SIZE;
- spin_unlock(&arch_rng_lock);
-
- /* kick next check */
- queue_delayed_work(system_long_wq, &arch_rng_work, delay);
-}
-
-static int __init s390_arch_random_init(void)
-{
- /* all the needed PRNO subfunctions available ? */
- if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_TRNG) &&
- cpacf_query_func(CPACF_PRNO, CPACF_PRNO_SHA512_DRNG_GEN)) {
-
- /* alloc arch random working buffer */
- arch_rng_buf = kmalloc(ARCH_RNG_BUF_SIZE, GFP_KERNEL);
- if (!arch_rng_buf)
- return -ENOMEM;
-
- /* kick worker queue job to fill the random buffer */
- queue_delayed_work(system_long_wq,
- &arch_rng_work, ARCH_REFILL_TICKS);
-
- /* enable arch random to the outside world */
- static_branch_enable(&s390_arch_random_available);
- }
-
- return 0;
-}
-arch_initcall(s390_arch_random_init);
--- a/arch/s390/include/asm/archrandom.h
+++ b/arch/s390/include/asm/archrandom.h
@@ -2,7 +2,7 @@
/*
* Kernel interface for the s390 arch_random_* functions
*
- * Copyright IBM Corp. 2017
+ * Copyright IBM Corp. 2017, 2020
*
* Author: Harald Freudenberger <freude@de.ibm.com>
*
@@ -15,34 +15,37 @@
#include <linux/static_key.h>
#include <linux/atomic.h>
+#include <asm/cpacf.h>
DECLARE_STATIC_KEY_FALSE(s390_arch_random_available);
extern atomic64_t s390_arch_random_counter;
-bool s390_arch_random_generate(u8 *buf, unsigned int nbytes);
-
-static inline bool arch_get_random_long(unsigned long *v)
+static inline bool __must_check arch_get_random_long(unsigned long *v)
{
return false;
}
-static inline bool arch_get_random_int(unsigned int *v)
+static inline bool __must_check arch_get_random_int(unsigned int *v)
{
return false;
}
-static inline bool arch_get_random_seed_long(unsigned long *v)
+static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
{
if (static_branch_likely(&s390_arch_random_available)) {
- return s390_arch_random_generate((u8 *)v, sizeof(*v));
+ cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
+ atomic64_add(sizeof(*v), &s390_arch_random_counter);
+ return true;
}
return false;
}
-static inline bool arch_get_random_seed_int(unsigned int *v)
+static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
{
if (static_branch_likely(&s390_arch_random_available)) {
- return s390_arch_random_generate((u8 *)v, sizeof(*v));
+ cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
+ atomic64_add(sizeof(*v), &s390_arch_random_counter);
+ return true;
}
return false;
}
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -1005,6 +1005,11 @@ static void __init setup_randomness(void
if (stsi(vmms, 3, 2, 2) == 0 && vmms->count)
add_device_randomness(&vmms->vm, sizeof(vmms->vm[0]) * vmms->count);
memblock_free((unsigned long) vmms, PAGE_SIZE);
+
+#ifdef CONFIG_ARCH_RANDOM
+ if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_TRNG))
+ static_branch_enable(&s390_arch_random_available);
+#endif
}
/*
next prev parent reply other threads:[~2022-07-05 12:09 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-05 11:57 [PATCH 5.4 00/58] 5.4.204-rc1 review Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 01/58] ipv6: take care of disable_policy when restoring routes Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 02/58] nvdimm: Fix badblocks clear off-by-one error Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 03/58] powerpc/prom_init: Fix kernel config grep Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 04/58] powerpc/bpf: Fix use of user_pt_regs in uapi Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 05/58] dm raid: fix accesses beyond end of raid member array Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 06/58] dm raid: fix KASAN warning in raid5_add_disks Greg Kroah-Hartman
2022-07-05 11:57 ` Greg Kroah-Hartman [this message]
2022-07-05 11:57 ` [PATCH 5.4 08/58] SUNRPC: Fix READ_PLUS crasher Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 09/58] net: rose: fix UAF bugs caused by timer handler Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 10/58] net: usb: ax88179_178a: Fix packet receiving Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 11/58] virtio-net: fix race between ndo_open() and virtio_device_ready() Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 12/58] selftests/net: pass ipv6_args to udpgso_benchs IPv6 TCP test Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 13/58] net: tun: unlink NAPI from device on destruction Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 14/58] net: tun: stop NAPI when detaching queues Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 15/58] RDMA/qedr: Fix reporting QP timeout attribute Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 16/58] linux/dim: Fix divide by 0 in RDMA DIM Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 17/58] usbnet: fix memory allocation in helpers Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 18/58] net: ipv6: unexport __init-annotated seg6_hmac_net_init() Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 19/58] caif_virtio: fix race between virtio_device_ready() and ndo_open() Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 20/58] PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 21/58] s390: remove unneeded select BUILD_BIN2C Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 22/58] netfilter: nft_dynset: restore set element counter when failing to update Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.4 23/58] net/sched: act_api: Notify user space if any actions were flushed before error Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 24/58] net: bonding: fix possible NULL deref in rlb code Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 25/58] net: bonding: fix use-after-free after 802.3ad slave unbind Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 26/58] nfc: nfcmrvl: Fix irq_of_parse_and_map() return value Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 27/58] NFC: nxp-nci: Dont issue a zero length i2c_master_read() Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 28/58] net: tun: avoid disabling NAPI twice Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 29/58] xen/gntdev: Avoid blocking in unmap_grant_pages() Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 30/58] hwmon: (ibmaem) dont call platform_device_del() if platform_device_add() fails Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 31/58] net: dsa: bcm_sf2: force pause link settings Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 32/58] sit: use min Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 33/58] ipv6/sit: fix ipip6_tunnel_get_prl return value Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 34/58] rseq/selftests,x86_64: Add rseq_offset_deref_addv() Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 35/58] selftests/rseq: remove ARRAY_SIZE define from individual tests Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 36/58] selftests/rseq: introduce own copy of rseq uapi header Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 37/58] selftests/rseq: Remove useless assignment to cpu variable Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 38/58] selftests/rseq: Remove volatile from __rseq_abi Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 39/58] selftests/rseq: Introduce rseq_get_abi() helper Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 40/58] selftests/rseq: Introduce thread pointer getters Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 41/58] selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35 Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 42/58] selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 43/58] selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 44/58] selftests/rseq: Fix ppc32 offsets by using long rather than off_t Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 45/58] selftests/rseq: Fix warnings about #if checks of undefined tokens Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 46/58] selftests/rseq: Remove arm/mips asm goto compiler work-around Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 47/58] selftests/rseq: Fix: work-around asm goto compiler bugs Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 48/58] selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 49/58] selftests/rseq: x86-32: use %gs " Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 50/58] selftests/rseq: Change type of rseq_offset to ptrdiff_t Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 51/58] xen/blkfront: fix leaking data in shared pages Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 52/58] xen/netfront: " Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 53/58] xen/netfront: force data bouncing when backend is untrusted Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 54/58] xen/blkfront: " Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 55/58] xen/arm: Fix race in RB-tree based P2M accounting Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 56/58] net: usb: qmi_wwan: add Telit 0x1060 composition Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 57/58] net: usb: qmi_wwan: add Telit 0x1070 composition Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.4 58/58] clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup() Greg Kroah-Hartman
2022-07-05 16:53 ` [PATCH 5.4 00/58] 5.4.204-rc1 review Florian Fainelli
2022-07-06 5:51 ` Samuel Zou
2022-07-06 6:55 ` Naresh Kamboju
2022-07-06 10:19 ` Sudip Mukherjee (Codethink)
2022-07-06 13:43 ` Guenter Roeck
2022-07-07 0:00 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220705115610.461671736@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=Jason@zx2c4.com \
--cc=agordeev@linux.ibm.com \
--cc=freude@linux.ibm.com \
--cc=hca@linux.ibm.com \
--cc=ifranzki@linux.ibm.com \
--cc=jchrist@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).