* [PATCH 5.10 01/84] drm/amdgpu: To flush tlb for MMHUB of RAVEN series
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 02/84] ipv6: take care of disable_policy when restoring routes Greg Kroah-Hartman
` (88 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ruili Ji, Philip Yang, Aaron Liu,
Alex Deucher
From: Ruili Ji <ruiliji2@amd.com>
commit 5cb0e3fb2c54eabfb3f932a1574bff1774946bc0 upstream.
amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1
When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.
v2:fix indentation
v3:change subject and fix indentation
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -689,7 +689,8 @@ int amdgpu_amdkfd_flush_gpu_tlb_pasid(st
const uint32_t flush_type = 0;
bool all_hub = false;
- if (adev->family == AMDGPU_FAMILY_AI)
+ if (adev->family == AMDGPU_FAMILY_AI ||
+ adev->family == AMDGPU_FAMILY_RV)
all_hub = true;
return amdgpu_gmc_flush_gpu_tlb_pasid(adev, pasid, flush_type, all_hub);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 02/84] ipv6: take care of disable_policy when restoring routes
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 01/84] drm/amdgpu: To flush tlb for MMHUB of RAVEN series Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 03/84] nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G) Greg Kroah-Hartman
` (87 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, stable, David Forster, Siwar Zitouni,
Nicolas Dichtel, David Ahern, Jakub Kicinski
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
commit 3b0dc529f56b5f2328244130683210be98f16f7f upstream.
When routes corresponding to addresses are restored by
fixup_permanent_addr(), the dst_nopolicy parameter was not set.
The typical use case is a user that configures an address on a down
interface and then put this interface up.
Let's take care of this flag in addrconf_f6i_alloc(), so that every callers
benefit ont it.
CC: stable@kernel.org
CC: David Forster <dforster@brocade.com>
Fixes: df789fe75206 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Reported-by: Siwar Zitouni <siwar.zitouni@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220623120015.32640-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/addrconf.c | 4 ----
net/ipv6/route.c | 9 ++++++++-
2 files changed, 8 insertions(+), 5 deletions(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1102,10 +1102,6 @@ ipv6_add_addr(struct inet6_dev *idev, st
goto out;
}
- if (net->ipv6.devconf_all->disable_policy ||
- idev->cnf.disable_policy)
- f6i->dst_nopolicy = true;
-
neigh_parms_data_state_setall(idev->nd_parms);
ifa->addr = *cfg->pfx;
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -4479,8 +4479,15 @@ struct fib6_info *addrconf_f6i_alloc(str
}
f6i = ip6_route_info_create(&cfg, gfp_flags, NULL);
- if (!IS_ERR(f6i))
+ if (!IS_ERR(f6i)) {
f6i->dst_nocount = true;
+
+ if (!anycast &&
+ (net->ipv6.devconf_all->disable_policy ||
+ idev->cnf.disable_policy))
+ f6i->dst_nopolicy = true;
+ }
+
return f6i;
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 03/84] nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 01/84] drm/amdgpu: To flush tlb for MMHUB of RAVEN series Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 02/84] ipv6: take care of disable_policy when restoring routes Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 04/84] nvdimm: Fix badblocks clear off-by-one error Greg Kroah-Hartman
` (86 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pablo Greco, Keith Busch,
Chaitanya Kulkarni, Christoph Hellwig
From: Pablo Greco <pgreco@centosproject.org>
commit 1629de0e0373e04d68e88e6d9d3071fbf70b7ea8 upstream.
ADATA XPG SPECTRIX S40G drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.
Before:
[ 2.258919] nvme nvme1: pci function 0000:06:00.0
[ 2.264898] nvme nvme2: pci function 0000:05:00.0
[ 2.323235] nvme nvme1: failed to set APST feature (2)
[ 2.326153] nvme nvme2: failed to set APST feature (2)
[ 2.333935] nvme nvme1: allocated 64 MiB host memory buffer.
[ 2.336492] nvme nvme2: allocated 64 MiB host memory buffer.
[ 2.339611] nvme nvme1: 7/0/0 default/read/poll queues
[ 2.341805] nvme nvme2: 7/0/0 default/read/poll queues
[ 2.346114] nvme1n1: p1
[ 2.347197] nvme nvme2: globally duplicate IDs for nsid 1
After:
[ 2.427715] nvme nvme1: pci function 0000:06:00.0
[ 2.427771] nvme nvme2: pci function 0000:05:00.0
[ 2.488154] nvme nvme2: failed to set APST feature (2)
[ 2.489895] nvme nvme1: failed to set APST feature (2)
[ 2.498773] nvme nvme2: allocated 64 MiB host memory buffer.
[ 2.500587] nvme nvme1: allocated 64 MiB host memory buffer.
[ 2.504113] nvme nvme2: 7/0/0 default/read/poll queues
[ 2.507026] nvme nvme1: 7/0/0 default/read/poll queues
[ 2.509467] nvme nvme2: Ignoring bogus Namespace Identifiers
[ 2.512804] nvme nvme1: Ignoring bogus Namespace Identifiers
[ 2.513698] nvme1n1: p1
Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nvme/host/pci.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3245,7 +3245,8 @@ static const struct pci_device_id nvme_i
{ PCI_DEVICE(0x1d1d, 0x2601), /* CNEX Granby */
.driver_data = NVME_QUIRK_LIGHTNVM, },
{ PCI_DEVICE(0x10ec, 0x5762), /* ADATA SX6000LNP */
- .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+ .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN |
+ NVME_QUIRK_BOGUS_NID, },
{ PCI_DEVICE(0x1cc1, 0x8201), /* ADATA SX8200PNP 512GB */
.driver_data = NVME_QUIRK_NO_DEEPEST_PS |
NVME_QUIRK_IGNORE_DEV_SUBNQN, },
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 04/84] nvdimm: Fix badblocks clear off-by-one error
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (2 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 03/84] nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G) Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 05/84] powerpc/prom_init: Fix kernel config grep Greg Kroah-Hartman
` (85 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Ye, Vishal Verma, Dan Williams
From: Chris Ye <chris.ye@intel.com>
commit ef9102004a87cb3f8b26e000a095a261fc0467d3 upstream.
nvdimm_clear_badblocks_region() validates badblock clearing requests
against the span of the region, however it compares the inclusive
badblock request range to the exclusive region range. Fix up the
off-by-one error.
Fixes: 23f498448362 ("libnvdimm: rework region badblocks clearing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ye <chris.ye@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/165404219489.2445897.9792886413715690399.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nvdimm/bus.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -187,8 +187,8 @@ static int nvdimm_clear_badblocks_region
ndr_end = nd_region->ndr_start + nd_region->ndr_size - 1;
/* make sure we are in the region */
- if (ctx->phys < nd_region->ndr_start
- || (ctx->phys + ctx->cleared) > ndr_end)
+ if (ctx->phys < nd_region->ndr_start ||
+ (ctx->phys + ctx->cleared - 1) > ndr_end)
return 0;
sector = (ctx->phys - nd_region->ndr_start) / 512;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 05/84] powerpc/prom_init: Fix kernel config grep
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (3 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 04/84] nvdimm: Fix badblocks clear off-by-one error Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 06/84] powerpc/book3e: Fix PUD allocation size in map_kernel_page() Greg Kroah-Hartman
` (84 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liam R. Howlett, Michael Ellerman
From: Liam Howlett <liam.howlett@oracle.com>
commit 6886da5f49e6d86aad76807a93f3eef5e4f01b10 upstream.
When searching for config options, use the KCONFIG_CONFIG shell variable
so that builds using non-standard config locations work.
Fixes: 26deb04342e3 ("powerpc: prepare string/mem functions for KASAN")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220624011745.4060795-1-Liam.Howlett@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/kernel/prom_init_check.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -13,7 +13,7 @@
# If you really need to reference something from prom_init.o add
# it to the list below:
-grep "^CONFIG_KASAN=y$" .config >/dev/null
+grep "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} >/dev/null
if [ $? -eq 0 ]
then
MEM_FUNCS="__memcpy __memset"
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 06/84] powerpc/book3e: Fix PUD allocation size in map_kernel_page()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (4 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 05/84] powerpc/prom_init: Fix kernel config grep Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 07/84] powerpc/bpf: Fix use of user_pt_regs in uapi Greg Kroah-Hartman
` (83 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Mike Rapoport,
Michael Ellerman
From: Christophe Leroy <christophe.leroy@csgroup.eu>
commit 986481618023e18e187646b0fff05a3c337531cb upstream.
Commit 2fb4706057bc ("powerpc: add support for folded p4d page tables")
erroneously changed PUD setup to a mix of PMD and PUD. Fix it.
While at it, use PTE_TABLE_SIZE instead of PAGE_SIZE for PTE tables
in order to avoid any confusion.
Fixes: 2fb4706057bc ("powerpc: add support for folded p4d page tables")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/95ddfd6176d53e6c85e13bd1c358359daa56775f.1655974558.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/mm/nohash/book3e_pgtable.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/powerpc/mm/nohash/book3e_pgtable.c
+++ b/arch/powerpc/mm/nohash/book3e_pgtable.c
@@ -95,8 +95,8 @@ int __ref map_kernel_page(unsigned long
pgdp = pgd_offset_k(ea);
p4dp = p4d_offset(pgdp, ea);
if (p4d_none(*p4dp)) {
- pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
- p4d_populate(&init_mm, p4dp, pmdp);
+ pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+ p4d_populate(&init_mm, p4dp, pudp);
}
pudp = pud_offset(p4dp, ea);
if (pud_none(*pudp)) {
@@ -105,7 +105,7 @@ int __ref map_kernel_page(unsigned long
}
pmdp = pmd_offset(pudp, ea);
if (!pmd_present(*pmdp)) {
- ptep = early_alloc_pgtable(PAGE_SIZE);
+ ptep = early_alloc_pgtable(PTE_TABLE_SIZE);
pmd_populate_kernel(&init_mm, pmdp, ptep);
}
ptep = pte_offset_kernel(pmdp, ea);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 07/84] powerpc/bpf: Fix use of user_pt_regs in uapi
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (5 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 06/84] powerpc/book3e: Fix PUD allocation size in map_kernel_page() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 08/84] dm raid: fix accesses beyond end of raid member array Greg Kroah-Hartman
` (82 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Naveen N. Rao, Michael Ellerman
From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
commit b21bd5a4b130f8370861478d2880985daace5913 upstream.
Trying to build a .c file that includes <linux/bpf_perf_event.h>:
$ cat test_bpf_headers.c
#include <linux/bpf_perf_event.h>
throws the below error:
/usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type
14 | bpf_user_pt_regs_t regs;
| ^~~~
This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs'
in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct
user_pt_regs' is not exposed to userspace.
Powerpc has both pt_regs and user_pt_regs structures. However, unlike
arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'.
As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for
userspace.
Within the kernel though, we want to typedef bpf_user_pt_regs_t to
'struct user_pt_regs'.
Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the
uapi/asm-generic version of the header is exposed to userspace.
Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can
typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the
kernel.
Note that this was not showing up with the bpf selftest build since
tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc
variant.
Fixes: a6460b03f945ee ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use typical naming for header include guard]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/bpf_perf_event.h | 9 +++++++++
arch/powerpc/include/uapi/asm/bpf_perf_event.h | 9 ---------
2 files changed, 9 insertions(+), 9 deletions(-)
create mode 100644 arch/powerpc/include/asm/bpf_perf_event.h
delete mode 100644 arch/powerpc/include/uapi/asm/bpf_perf_event.h
--- /dev/null
+++ b/arch/powerpc/include/asm/bpf_perf_event.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BPF_PERF_EVENT_H
+#define _ASM_POWERPC_BPF_PERF_EVENT_H
+
+#include <asm/ptrace.h>
+
+typedef struct user_pt_regs bpf_user_pt_regs_t;
+
+#endif /* _ASM_POWERPC_BPF_PERF_EVENT_H */
--- a/arch/powerpc/include/uapi/asm/bpf_perf_event.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__
-#define _UAPI__ASM_BPF_PERF_EVENT_H__
-
-#include <asm/ptrace.h>
-
-typedef struct user_pt_regs bpf_user_pt_regs_t;
-
-#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 08/84] dm raid: fix accesses beyond end of raid member array
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (6 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 07/84] powerpc/bpf: Fix use of user_pt_regs in uapi Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 09/84] dm raid: fix KASAN warning in raid5_add_disks Greg Kroah-Hartman
` (81 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heinz Mauelshagen, Mike Snitzer
From: Heinz Mauelshagen <heinzm@redhat.com>
commit 332bd0778775d0cf105c4b9e03e460b590749916 upstream.
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-raid.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
--- a/drivers/md/dm-raid.c
+++ b/drivers/md/dm-raid.c
@@ -1002,12 +1002,13 @@ static int validate_region_size(struct r
static int validate_raid_redundancy(struct raid_set *rs)
{
unsigned int i, rebuild_cnt = 0;
- unsigned int rebuilds_per_group = 0, copies;
+ unsigned int rebuilds_per_group = 0, copies, raid_disks;
unsigned int group_size, last_group_start;
- for (i = 0; i < rs->md.raid_disks; i++)
- if (!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
- !rs->dev[i].rdev.sb_page)
+ for (i = 0; i < rs->raid_disks; i++)
+ if (!test_bit(FirstUse, &rs->dev[i].rdev.flags) &&
+ ((!test_bit(In_sync, &rs->dev[i].rdev.flags) ||
+ !rs->dev[i].rdev.sb_page)))
rebuild_cnt++;
switch (rs->md.level) {
@@ -1047,8 +1048,9 @@ static int validate_raid_redundancy(stru
* A A B B C
* C D D E E
*/
+ raid_disks = min(rs->raid_disks, rs->md.raid_disks);
if (__is_raid10_near(rs->md.new_layout)) {
- for (i = 0; i < rs->md.raid_disks; i++) {
+ for (i = 0; i < raid_disks; i++) {
if (!(i % copies))
rebuilds_per_group = 0;
if ((!rs->dev[i].rdev.sb_page ||
@@ -1071,10 +1073,10 @@ static int validate_raid_redundancy(stru
* results in the need to treat the last (potentially larger)
* set differently.
*/
- group_size = (rs->md.raid_disks / copies);
- last_group_start = (rs->md.raid_disks / group_size) - 1;
+ group_size = (raid_disks / copies);
+ last_group_start = (raid_disks / group_size) - 1;
last_group_start *= group_size;
- for (i = 0; i < rs->md.raid_disks; i++) {
+ for (i = 0; i < raid_disks; i++) {
if (!(i % copies) && !(i > last_group_start))
rebuilds_per_group = 0;
if ((!rs->dev[i].rdev.sb_page ||
@@ -1589,7 +1591,7 @@ static sector_t __rdev_sectors(struct ra
{
int i;
- for (i = 0; i < rs->md.raid_disks; i++) {
+ for (i = 0; i < rs->raid_disks; i++) {
struct md_rdev *rdev = &rs->dev[i].rdev;
if (!test_bit(Journal, &rdev->flags) &&
@@ -3732,13 +3734,13 @@ static int raid_iterate_devices(struct d
unsigned int i;
int r = 0;
- for (i = 0; !r && i < rs->md.raid_disks; i++)
- if (rs->dev[i].data_dev)
- r = fn(ti,
- rs->dev[i].data_dev,
- 0, /* No offset on data devs */
- rs->md.dev_sectors,
- data);
+ for (i = 0; !r && i < rs->raid_disks; i++) {
+ if (rs->dev[i].data_dev) {
+ r = fn(ti, rs->dev[i].data_dev,
+ 0, /* No offset on data devs */
+ rs->md.dev_sectors, data);
+ }
+ }
return r;
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 09/84] dm raid: fix KASAN warning in raid5_add_disks
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (7 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 08/84] dm raid: fix accesses beyond end of raid member array Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 10/84] s390/archrandom: simplify back to earlier design and initialize earlier Greg Kroah-Hartman
` (80 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Mikulas Patocka, Mike Snitzer
From: Mikulas Patocka <mpatocka@redhat.com>
commit 617b365872a247480e9dcd50a32c8d1806b21861 upstream.
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/raid5.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -8004,6 +8004,7 @@ static int raid5_add_disk(struct mddev *
*/
if (rdev->saved_raid_disk >= 0 &&
rdev->saved_raid_disk >= first &&
+ rdev->saved_raid_disk <= last &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
first = rdev->saved_raid_disk;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 10/84] s390/archrandom: simplify back to earlier design and initialize earlier
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (8 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 09/84] dm raid: fix KASAN warning in raid5_add_disks Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 11/84] SUNRPC: Fix READ_PLUS crasher Greg Kroah-Hartman
` (79 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Harald Freudenberger, Ingo Franzki,
Juergen Christ, Heiko Carstens, Jason A. Donenfeld,
Alexander Gordeev
From: Jason A. Donenfeld <Jason@zx2c4.com>
commit e4f74400308cb8abde5fdc9cad609c2aba32110c upstream.
s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.
Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.
Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.
So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().
Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().
Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/crypto/arch_random.c | 111 -------------------------------------
arch/s390/include/asm/archrandom.h | 13 ++--
arch/s390/kernel/setup.c | 5 +
3 files changed, 14 insertions(+), 115 deletions(-)
--- a/arch/s390/crypto/arch_random.c
+++ b/arch/s390/crypto/arch_random.c
@@ -2,126 +2,17 @@
/*
* s390 arch random implementation.
*
- * Copyright IBM Corp. 2017, 2018
+ * Copyright IBM Corp. 2017, 2020
* Author(s): Harald Freudenberger
- *
- * The s390_arch_random_generate() function may be called from random.c
- * in interrupt context. So this implementation does the best to be very
- * fast. There is a buffer of random data which is asynchronously checked
- * and filled by a workqueue thread.
- * If there are enough bytes in the buffer the s390_arch_random_generate()
- * just delivers these bytes. Otherwise false is returned until the
- * worker thread refills the buffer.
- * The worker fills the rng buffer by pulling fresh entropy from the
- * high quality (but slow) true hardware random generator. This entropy
- * is then spread over the buffer with an pseudo random generator PRNG.
- * As the arch_get_random_seed_long() fetches 8 bytes and the calling
- * function add_interrupt_randomness() counts this as 1 bit entropy the
- * distribution needs to make sure there is in fact 1 bit entropy contained
- * in 8 bytes of the buffer. The current values pull 32 byte entropy
- * and scatter this into a 2048 byte buffer. So 8 byte in the buffer
- * will contain 1 bit of entropy.
- * The worker thread is rescheduled based on the charge level of the
- * buffer but at least with 500 ms delay to avoid too much CPU consumption.
- * So the max. amount of rng data delivered via arch_get_random_seed is
- * limited to 4k bytes per second.
*/
#include <linux/kernel.h>
#include <linux/atomic.h>
#include <linux/random.h>
-#include <linux/slab.h>
#include <linux/static_key.h>
-#include <linux/workqueue.h>
#include <asm/cpacf.h>
DEFINE_STATIC_KEY_FALSE(s390_arch_random_available);
atomic64_t s390_arch_random_counter = ATOMIC64_INIT(0);
EXPORT_SYMBOL(s390_arch_random_counter);
-
-#define ARCH_REFILL_TICKS (HZ/2)
-#define ARCH_PRNG_SEED_SIZE 32
-#define ARCH_RNG_BUF_SIZE 2048
-
-static DEFINE_SPINLOCK(arch_rng_lock);
-static u8 *arch_rng_buf;
-static unsigned int arch_rng_buf_idx;
-
-static void arch_rng_refill_buffer(struct work_struct *);
-static DECLARE_DELAYED_WORK(arch_rng_work, arch_rng_refill_buffer);
-
-bool s390_arch_random_generate(u8 *buf, unsigned int nbytes)
-{
- /* max hunk is ARCH_RNG_BUF_SIZE */
- if (nbytes > ARCH_RNG_BUF_SIZE)
- return false;
-
- /* lock rng buffer */
- if (!spin_trylock(&arch_rng_lock))
- return false;
-
- /* try to resolve the requested amount of bytes from the buffer */
- arch_rng_buf_idx -= nbytes;
- if (arch_rng_buf_idx < ARCH_RNG_BUF_SIZE) {
- memcpy(buf, arch_rng_buf + arch_rng_buf_idx, nbytes);
- atomic64_add(nbytes, &s390_arch_random_counter);
- spin_unlock(&arch_rng_lock);
- return true;
- }
-
- /* not enough bytes in rng buffer, refill is done asynchronously */
- spin_unlock(&arch_rng_lock);
-
- return false;
-}
-EXPORT_SYMBOL(s390_arch_random_generate);
-
-static void arch_rng_refill_buffer(struct work_struct *unused)
-{
- unsigned int delay = ARCH_REFILL_TICKS;
-
- spin_lock(&arch_rng_lock);
- if (arch_rng_buf_idx > ARCH_RNG_BUF_SIZE) {
- /* buffer is exhausted and needs refill */
- u8 seed[ARCH_PRNG_SEED_SIZE];
- u8 prng_wa[240];
- /* fetch ARCH_PRNG_SEED_SIZE bytes of entropy */
- cpacf_trng(NULL, 0, seed, sizeof(seed));
- /* blow this entropy up to ARCH_RNG_BUF_SIZE with PRNG */
- memset(prng_wa, 0, sizeof(prng_wa));
- cpacf_prno(CPACF_PRNO_SHA512_DRNG_SEED,
- &prng_wa, NULL, 0, seed, sizeof(seed));
- cpacf_prno(CPACF_PRNO_SHA512_DRNG_GEN,
- &prng_wa, arch_rng_buf, ARCH_RNG_BUF_SIZE, NULL, 0);
- arch_rng_buf_idx = ARCH_RNG_BUF_SIZE;
- }
- delay += (ARCH_REFILL_TICKS * arch_rng_buf_idx) / ARCH_RNG_BUF_SIZE;
- spin_unlock(&arch_rng_lock);
-
- /* kick next check */
- queue_delayed_work(system_long_wq, &arch_rng_work, delay);
-}
-
-static int __init s390_arch_random_init(void)
-{
- /* all the needed PRNO subfunctions available ? */
- if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_TRNG) &&
- cpacf_query_func(CPACF_PRNO, CPACF_PRNO_SHA512_DRNG_GEN)) {
-
- /* alloc arch random working buffer */
- arch_rng_buf = kmalloc(ARCH_RNG_BUF_SIZE, GFP_KERNEL);
- if (!arch_rng_buf)
- return -ENOMEM;
-
- /* kick worker queue job to fill the random buffer */
- queue_delayed_work(system_long_wq,
- &arch_rng_work, ARCH_REFILL_TICKS);
-
- /* enable arch random to the outside world */
- static_branch_enable(&s390_arch_random_available);
- }
-
- return 0;
-}
-arch_initcall(s390_arch_random_init);
--- a/arch/s390/include/asm/archrandom.h
+++ b/arch/s390/include/asm/archrandom.h
@@ -2,7 +2,7 @@
/*
* Kernel interface for the s390 arch_random_* functions
*
- * Copyright IBM Corp. 2017
+ * Copyright IBM Corp. 2017, 2020
*
* Author: Harald Freudenberger <freude@de.ibm.com>
*
@@ -15,12 +15,11 @@
#include <linux/static_key.h>
#include <linux/atomic.h>
+#include <asm/cpacf.h>
DECLARE_STATIC_KEY_FALSE(s390_arch_random_available);
extern atomic64_t s390_arch_random_counter;
-bool s390_arch_random_generate(u8 *buf, unsigned int nbytes);
-
static inline bool __must_check arch_get_random_long(unsigned long *v)
{
return false;
@@ -34,7 +33,9 @@ static inline bool __must_check arch_get
static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
{
if (static_branch_likely(&s390_arch_random_available)) {
- return s390_arch_random_generate((u8 *)v, sizeof(*v));
+ cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
+ atomic64_add(sizeof(*v), &s390_arch_random_counter);
+ return true;
}
return false;
}
@@ -42,7 +43,9 @@ static inline bool __must_check arch_get
static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
{
if (static_branch_likely(&s390_arch_random_available)) {
- return s390_arch_random_generate((u8 *)v, sizeof(*v));
+ cpacf_trng(NULL, 0, (u8 *)v, sizeof(*v));
+ atomic64_add(sizeof(*v), &s390_arch_random_counter);
+ return true;
}
return false;
}
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -1009,6 +1009,11 @@ static void __init setup_randomness(void
if (stsi(vmms, 3, 2, 2) == 0 && vmms->count)
add_device_randomness(&vmms->vm, sizeof(vmms->vm[0]) * vmms->count);
memblock_free((unsigned long) vmms, PAGE_SIZE);
+
+#ifdef CONFIG_ARCH_RANDOM
+ if (cpacf_query_func(CPACF_PRNO, CPACF_PRNO_TRNG))
+ static_branch_enable(&s390_arch_random_available);
+#endif
}
/*
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 11/84] SUNRPC: Fix READ_PLUS crasher
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (9 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 10/84] s390/archrandom: simplify back to earlier design and initialize earlier Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 12/84] net: rose: fix UAF bugs caused by timer handler Greg Kroah-Hartman
` (78 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Bruce Fields, Zorro Lang, Chuck Lever
From: Chuck Lever <chuck.lever@oracle.com>
commit a23dd544debcda4ee4a549ec7de59e85c3c8345c upstream.
Looks like there are still cases when "space_left - frag1bytes" can
legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains
within the current encode buffer.
Reported-by: Bruce Fields <bfields@fieldses.org>
Reported-by: Zorro Lang <zlang@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151
Fixes: 6c254bf3b637 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sunrpc/xdr.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/sunrpc/xdr.c
+++ b/net/sunrpc/xdr.c
@@ -752,7 +752,7 @@ static __be32 *xdr_get_next_encode_buffe
*/
xdr->p = (void *)p + frag2bytes;
space_left = xdr->buf->buflen - xdr->buf->len;
- if (space_left - nbytes >= PAGE_SIZE)
+ if (space_left - frag1bytes >= PAGE_SIZE)
xdr->end = (void *)p + PAGE_SIZE;
else
xdr->end = (void *)p + space_left - frag1bytes;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 12/84] net: rose: fix UAF bugs caused by timer handler
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (10 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 11/84] SUNRPC: Fix READ_PLUS crasher Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 13/84] net: usb: ax88179_178a: Fix packet receiving Greg Kroah-Hartman
` (77 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Duoming Zhou, Paolo Abeni
From: Duoming Zhou <duoming@zju.edu.cn>
commit 9cc02ede696272c5271a401e4f27c262359bc2f6 upstream.
There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.
One of the UAF bugs is shown below:
(thread 1) | (thread 2)
| rose_bind
| rose_connect
| rose_start_heartbeat
rose_release | (wait a time)
case ROSE_STATE_0 |
rose_destroy_socket | rose_heartbeat_expiry
rose_stop_heartbeat |
sock_put(sk) | ...
sock_put(sk) // FREE |
| bh_lock_sock(sk) // USE
The sock is deallocated by sock_put() in rose_release() and
then used by bh_lock_sock() in rose_heartbeat_expiry().
Although rose_destroy_socket() calls rose_stop_heartbeat(),
it could not stop the timer that is running.
The KASAN report triggered by POC is shown below:
BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110
Write of size 4 at addr ffff88800ae59098 by task swapper/3/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? irq_work_single+0xbb/0x140
? _raw_spin_lock+0x5a/0x110
kasan_report+0xed/0x120
? _raw_spin_lock+0x5a/0x110
kasan_check_range+0x2bd/0x2e0
_raw_spin_lock+0x5a/0x110
rose_heartbeat_expiry+0x39/0x370
? rose_start_heartbeat+0xb0/0xb0
call_timer_fn+0x2d/0x1c0
? rose_start_heartbeat+0xb0/0xb0
expire_timers+0x1f3/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
irq_exit_rcu+0x41/0xa0
sysvec_apic_timer_interrupt+0x8c/0xb0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:default_idle+0xb/0x10
RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202
RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae
RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180
RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46
R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000
R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000
...
Allocated by task 146:
__kasan_kmalloc+0xc4/0xf0
sk_prot_alloc+0xdd/0x1a0
sk_alloc+0x2d/0x4e0
rose_create+0x7b/0x330
__sock_create+0x2dd/0x640
__sys_socket+0xc7/0x270
__x64_sys_socket+0x71/0x80
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 152:
kasan_set_track+0x4c/0x70
kasan_set_free_info+0x1f/0x40
____kasan_slab_free+0x124/0x190
kfree+0xd3/0x270
__sk_destruct+0x314/0x460
rose_release+0x2fa/0x3b0
sock_close+0xcb/0x230
__fput+0x2d9/0x650
task_work_run+0xd6/0x160
exit_to_user_mode_loop+0xc7/0xd0
exit_to_user_mode_prepare+0x4e/0x80
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x4f/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/rose/rose_timer.c | 34 +++++++++++++++++++---------------
1 file changed, 19 insertions(+), 15 deletions(-)
--- a/net/rose/rose_timer.c
+++ b/net/rose/rose_timer.c
@@ -31,89 +31,89 @@ static void rose_idletimer_expiry(struct
void rose_start_heartbeat(struct sock *sk)
{
- del_timer(&sk->sk_timer);
+ sk_stop_timer(sk, &sk->sk_timer);
sk->sk_timer.function = rose_heartbeat_expiry;
sk->sk_timer.expires = jiffies + 5 * HZ;
- add_timer(&sk->sk_timer);
+ sk_reset_timer(sk, &sk->sk_timer, sk->sk_timer.expires);
}
void rose_start_t1timer(struct sock *sk)
{
struct rose_sock *rose = rose_sk(sk);
- del_timer(&rose->timer);
+ sk_stop_timer(sk, &rose->timer);
rose->timer.function = rose_timer_expiry;
rose->timer.expires = jiffies + rose->t1;
- add_timer(&rose->timer);
+ sk_reset_timer(sk, &rose->timer, rose->timer.expires);
}
void rose_start_t2timer(struct sock *sk)
{
struct rose_sock *rose = rose_sk(sk);
- del_timer(&rose->timer);
+ sk_stop_timer(sk, &rose->timer);
rose->timer.function = rose_timer_expiry;
rose->timer.expires = jiffies + rose->t2;
- add_timer(&rose->timer);
+ sk_reset_timer(sk, &rose->timer, rose->timer.expires);
}
void rose_start_t3timer(struct sock *sk)
{
struct rose_sock *rose = rose_sk(sk);
- del_timer(&rose->timer);
+ sk_stop_timer(sk, &rose->timer);
rose->timer.function = rose_timer_expiry;
rose->timer.expires = jiffies + rose->t3;
- add_timer(&rose->timer);
+ sk_reset_timer(sk, &rose->timer, rose->timer.expires);
}
void rose_start_hbtimer(struct sock *sk)
{
struct rose_sock *rose = rose_sk(sk);
- del_timer(&rose->timer);
+ sk_stop_timer(sk, &rose->timer);
rose->timer.function = rose_timer_expiry;
rose->timer.expires = jiffies + rose->hb;
- add_timer(&rose->timer);
+ sk_reset_timer(sk, &rose->timer, rose->timer.expires);
}
void rose_start_idletimer(struct sock *sk)
{
struct rose_sock *rose = rose_sk(sk);
- del_timer(&rose->idletimer);
+ sk_stop_timer(sk, &rose->idletimer);
if (rose->idle > 0) {
rose->idletimer.function = rose_idletimer_expiry;
rose->idletimer.expires = jiffies + rose->idle;
- add_timer(&rose->idletimer);
+ sk_reset_timer(sk, &rose->idletimer, rose->idletimer.expires);
}
}
void rose_stop_heartbeat(struct sock *sk)
{
- del_timer(&sk->sk_timer);
+ sk_stop_timer(sk, &sk->sk_timer);
}
void rose_stop_timer(struct sock *sk)
{
- del_timer(&rose_sk(sk)->timer);
+ sk_stop_timer(sk, &rose_sk(sk)->timer);
}
void rose_stop_idletimer(struct sock *sk)
{
- del_timer(&rose_sk(sk)->idletimer);
+ sk_stop_timer(sk, &rose_sk(sk)->idletimer);
}
static void rose_heartbeat_expiry(struct timer_list *t)
@@ -130,6 +130,7 @@ static void rose_heartbeat_expiry(struct
(sk->sk_state == TCP_LISTEN && sock_flag(sk, SOCK_DEAD))) {
bh_unlock_sock(sk);
rose_destroy_socket(sk);
+ sock_put(sk);
return;
}
break;
@@ -152,6 +153,7 @@ static void rose_heartbeat_expiry(struct
rose_start_heartbeat(sk);
bh_unlock_sock(sk);
+ sock_put(sk);
}
static void rose_timer_expiry(struct timer_list *t)
@@ -181,6 +183,7 @@ static void rose_timer_expiry(struct tim
break;
}
bh_unlock_sock(sk);
+ sock_put(sk);
}
static void rose_idletimer_expiry(struct timer_list *t)
@@ -205,4 +208,5 @@ static void rose_idletimer_expiry(struct
sock_set_flag(sk, SOCK_DEAD);
}
bh_unlock_sock(sk);
+ sock_put(sk);
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 13/84] net: usb: ax88179_178a: Fix packet receiving
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (11 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 12/84] net: rose: fix UAF bugs caused by timer handler Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 14/84] virtio-net: fix race between ndo_open() and virtio_device_ready() Greg Kroah-Hartman
` (76 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jose Alonso, Paolo Abeni
From: Jose Alonso <joalonsof@gmail.com>
commit f8ebb3ac881b17712e1d5967c97ab1806b16d3d6 upstream.
This patch corrects packet receiving in ax88179_rx_fixup.
- problem observed:
ifconfig shows allways a lot of 'RX Errors' while packets
are received normally.
This occurs because ax88179_rx_fixup does not recognise properly
the usb urb received.
The packets are normally processed and at the end, the code exits
with 'return 0', generating RX Errors.
(pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
another packet there)
This is a usb urb received by "tcpdump -i usbmon2 -X" on a
little-endian CPU:
0x0000: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
^ packet 1 start (pkt_len = 0x05ec)
^^^^ IP alignment pseudo header
^ ethernet packet start
last byte ethernet packet v
padding (8-bytes aligned) vvvv vvvv
0x05e0: c92d d444 1420 8a69 83dd 272f e82b 9811
0x05f0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 2
0x0be0: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
...
0x1130: 9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
...
0x1720: 8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
...
0x1d10: ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
...
0x2070: eeee f8e3 3b19 87a0 94de 80e3 daac 0800
... ^ packet 7
0x2120: 7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
0x2130: f032 e093 7489 0740 3008 ec05 0000 0080
====1==== ====2====
hdr_off ^
pkt_len = 0x05ec ^^^^
AX_RXHDR_*=0x00830 ^^^^ ^
pkt_len = 0 ^^^^
AX_RXHDR_DROP_ERR=0x80000000 ^^^^ ^
0x2140: 3008 ec05 0000 0080 3008 5805 0000 0080
0x2150: 3008 ec05 0000 0080 3008 ec05 0000 0080
0x2160: 3008 5803 0000 0080 3008 c800 0000 0080
===11==== ===12==== ===13==== ===14====
0x2170: 0000 0000 0e00 3821
^^^^ ^^^^ rx_hdr
^^^^ pkt_cnt=14
^^^^ hdr_off=0x2138
^^^^ ^^^^ padding
The dump shows that pkt_cnt is the number of entrys in the
per-packet metadata. It is "2 * packet count".
Each packet have two entrys. The first have a valid
value (pkt_len and AX_RXHDR_*) and the second have a
dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
Why exists dummy-header for each packet?!?
My guess is that this was done probably to align the
entry for each packet to 64-bits and maintain compatibility
with old firmware.
There is also a padding (0x00000000) before the rx_hdr to
align the end of rx_hdr to 64-bit.
Note that packets have a alignment of 64-bits (8-bytes).
This patch assumes that the dummy-header and the last
padding are optional. So it preserves semantics and
recognises the same valid packets as the current code.
This patch was made using only the dumpfile information and
tested with only one device:
0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/ax88179_178a.c | 101 ++++++++++++++++++++++++++++++-----------
1 file changed, 76 insertions(+), 25 deletions(-)
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1471,6 +1471,42 @@ static int ax88179_rx_fixup(struct usbne
* are bundled into this buffer and where we can find an array of
* per-packet metadata (which contains elements encoded into u16).
*/
+
+ /* SKB contents for current firmware:
+ * <packet 1> <padding>
+ * ...
+ * <packet N> <padding>
+ * <per-packet metadata entry 1> <dummy header>
+ * ...
+ * <per-packet metadata entry N> <dummy header>
+ * <padding2> <rx_hdr>
+ *
+ * where:
+ * <packet N> contains pkt_len bytes:
+ * 2 bytes of IP alignment pseudo header
+ * packet received
+ * <per-packet metadata entry N> contains 4 bytes:
+ * pkt_len and fields AX_RXHDR_*
+ * <padding> 0-7 bytes to terminate at
+ * 8 bytes boundary (64-bit).
+ * <padding2> 4 bytes to make rx_hdr terminate at
+ * 8 bytes boundary (64-bit)
+ * <dummy-header> contains 4 bytes:
+ * pkt_len=0 and AX_RXHDR_DROP_ERR
+ * <rx-hdr> contains 4 bytes:
+ * pkt_cnt and hdr_off (offset of
+ * <per-packet metadata entry 1>)
+ *
+ * pkt_cnt is number of entrys in the per-packet metadata.
+ * In current firmware there is 2 entrys per packet.
+ * The first points to the packet and the
+ * second is a dummy header.
+ * This was done probably to align fields in 64-bit and
+ * maintain compatibility with old firmware.
+ * This code assumes that <dummy header> and <padding2> are
+ * optional.
+ */
+
if (skb->len < 4)
return 0;
skb_trim(skb, skb->len - 4);
@@ -1484,51 +1520,66 @@ static int ax88179_rx_fixup(struct usbne
/* Make sure that the bounds of the metadata array are inside the SKB
* (and in front of the counter at the end).
*/
- if (pkt_cnt * 2 + hdr_off > skb->len)
+ if (pkt_cnt * 4 + hdr_off > skb->len)
return 0;
pkt_hdr = (u32 *)(skb->data + hdr_off);
/* Packets must not overlap the metadata array */
skb_trim(skb, hdr_off);
- for (; ; pkt_cnt--, pkt_hdr++) {
+ for (; pkt_cnt > 0; pkt_cnt--, pkt_hdr++) {
+ u16 pkt_len_plus_padd;
u16 pkt_len;
le32_to_cpus(pkt_hdr);
pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+ pkt_len_plus_padd = (pkt_len + 7) & 0xfff8;
- if (pkt_len > skb->len)
+ /* Skip dummy header used for alignment
+ */
+ if (pkt_len == 0)
+ continue;
+
+ if (pkt_len_plus_padd > skb->len)
return 0;
/* Check CRC or runt packet */
- if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) &&
- pkt_len >= 2 + ETH_HLEN) {
- bool last = (pkt_cnt == 0);
-
- if (last) {
- ax_skb = skb;
- } else {
- ax_skb = skb_clone(skb, GFP_ATOMIC);
- if (!ax_skb)
- return 0;
- }
- ax_skb->len = pkt_len;
- /* Skip IP alignment pseudo header */
- skb_pull(ax_skb, 2);
- skb_set_tail_pointer(ax_skb, ax_skb->len);
- ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
- ax88179_rx_checksum(ax_skb, pkt_hdr);
+ if ((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) ||
+ pkt_len < 2 + ETH_HLEN) {
+ dev->net->stats.rx_errors++;
+ skb_pull(skb, pkt_len_plus_padd);
+ continue;
+ }
- if (last)
- return 1;
+ /* last packet */
+ if (pkt_len_plus_padd == skb->len) {
+ skb_trim(skb, pkt_len);
- usbnet_skb_return(dev, ax_skb);
+ /* Skip IP alignment pseudo header */
+ skb_pull(skb, 2);
+
+ skb->truesize = SKB_TRUESIZE(pkt_len_plus_padd);
+ ax88179_rx_checksum(skb, pkt_hdr);
+ return 1;
}
- /* Trim this packet away from the SKB */
- if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8))
+ ax_skb = skb_clone(skb, GFP_ATOMIC);
+ if (!ax_skb)
return 0;
+ skb_trim(ax_skb, pkt_len);
+
+ /* Skip IP alignment pseudo header */
+ skb_pull(ax_skb, 2);
+
+ skb->truesize = pkt_len_plus_padd +
+ SKB_DATA_ALIGN(sizeof(struct sk_buff));
+ ax88179_rx_checksum(ax_skb, pkt_hdr);
+ usbnet_skb_return(dev, ax_skb);
+
+ skb_pull(skb, pkt_len_plus_padd);
}
+
+ return 0;
}
static struct sk_buff *
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 14/84] virtio-net: fix race between ndo_open() and virtio_device_ready()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (12 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 13/84] net: usb: ax88179_178a: Fix packet receiving Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 15/84] selftests/net: pass ipv6_args to udpgso_benchs IPv6 TCP test Greg Kroah-Hartman
` (75 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jason Wang, Michael S. Tsirkin
From: Jason Wang <jasowang@redhat.com>
commit 50c0ada627f56c92f5953a8bf9158b045ad026a1 upstream.
We currently call virtio_device_ready() after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 4baf1e33d0842 ("virtio_net: enable VQs early")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220617072949.30734-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/virtio_net.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -3171,14 +3171,20 @@ static int virtnet_probe(struct virtio_d
}
}
- err = register_netdev(dev);
+ /* serialize netdev register + virtio_device_ready() with ndo_open() */
+ rtnl_lock();
+
+ err = register_netdevice(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
+ rtnl_unlock();
goto free_failover;
}
virtio_device_ready(vdev);
+ rtnl_unlock();
+
err = virtnet_cpu_notif_add(vi);
if (err) {
pr_debug("virtio_net: registering cpu notifier failed\n");
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 15/84] selftests/net: pass ipv6_args to udpgso_benchs IPv6 TCP test
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (13 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 14/84] virtio-net: fix race between ndo_open() and virtio_device_ready() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 16/84] net: dsa: bcm_sf2: force pause link settings Greg Kroah-Hartman
` (74 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, willemb, Dimitris Michailidis,
Jakub Kicinski
From: Dimitris Michailidis <d.michailidis@fungible.com>
commit b968080808f7f28b89aa495b7402ba48eb17ee93 upstream.
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments
since its initial conmit. Looks like a typo.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Cc: willemb@google.com
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/net/udpgso_bench.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/net/udpgso_bench.sh
+++ b/tools/testing/selftests/net/udpgso_bench.sh
@@ -120,7 +120,7 @@ run_all() {
run_udp "${ipv4_args}"
echo "ipv6"
- run_tcp "${ipv4_args}"
+ run_tcp "${ipv6_args}"
run_udp "${ipv6_args}"
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 16/84] net: dsa: bcm_sf2: force pause link settings
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (14 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 15/84] selftests/net: pass ipv6_args to udpgso_benchs IPv6 TCP test Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 17/84] net: tun: unlink NAPI from device on destruction Greg Kroah-Hartman
` (73 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Doug Berger, Florian Fainelli,
Jakub Kicinski
From: Doug Berger <opendmb@gmail.com>
commit 7c97bc0128b2eecc703106112679a69d446d1a12 upstream.
The pause settings reported by the PHY should also be applied to the GMII port
status override otherwise the switch will not generate pause frames towards the
link partner despite the advertisement saying otherwise.
Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220623030204.1966851-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/dsa/bcm_sf2.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -774,6 +774,11 @@ static void bcm_sf2_sw_mac_link_up(struc
if (duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
+ if (tx_pause)
+ reg |= TXFLOW_CNTL;
+ if (rx_pause)
+ reg |= RXFLOW_CNTL;
+
core_writel(priv, reg, offset);
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 17/84] net: tun: unlink NAPI from device on destruction
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (15 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 16/84] net: dsa: bcm_sf2: force pause link settings Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 18/84] net: tun: stop NAPI when detaching queues Greg Kroah-Hartman
` (72 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot+b75c138e9286ac742647,
Jakub Kicinski
From: Jakub Kicinski <kuba@kernel.org>
commit 3b9bc84d311104906d2b4995a9a02d7b7ddab2db upstream.
Syzbot found a race between tun file and device destruction.
NAPIs live in struct tun_file which can get destroyed before
the netdev so we have to del them explicitly. The current
code is missing deleting the NAPI if the queue was detached
first.
Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver")
Reported-by: syzbot+b75c138e9286ac742647@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220623042039.2274708-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/tun.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -733,6 +733,7 @@ static void tun_detach_all(struct net_de
sock_put(&tfile->sk);
}
list_for_each_entry_safe(tfile, tmp, &tun->disabled, next) {
+ tun_napi_del(tfile);
tun_enable_queue(tfile);
tun_queue_purge(tfile);
xdp_rxq_info_unreg(&tfile->xdp_rxq);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 18/84] net: tun: stop NAPI when detaching queues
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (16 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 17/84] net: tun: unlink NAPI from device on destruction Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 19/84] net: dp83822: disable false carrier interrupt Greg Kroah-Hartman
` (71 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Petar Penkov, Jakub Kicinski
From: Jakub Kicinski <kuba@kernel.org>
commit a8fc8cb5692aebb9c6f7afd4265366d25dcd1d01 upstream.
While looking at a syzbot report I noticed the NAPI only gets
disabled before it's deleted. I think that user can detach
the queue before destroying the device and the NAPI will never
be stopped.
Fixes: 943170998b20 ("tun: enable NAPI for TUN/TAP driver")
Acked-by: Petar Penkov <ppenkov@aviatrix.com>
Link: https://lore.kernel.org/r/20220623042105.2274812-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/tun.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -279,6 +279,12 @@ static void tun_napi_init(struct tun_str
}
}
+static void tun_napi_enable(struct tun_file *tfile)
+{
+ if (tfile->napi_enabled)
+ napi_enable(&tfile->napi);
+}
+
static void tun_napi_disable(struct tun_file *tfile)
{
if (tfile->napi_enabled)
@@ -659,8 +665,10 @@ static void __tun_detach(struct tun_file
if (clean) {
RCU_INIT_POINTER(tfile->tun, NULL);
sock_put(&tfile->sk);
- } else
+ } else {
tun_disable_queue(tun, tfile);
+ tun_napi_disable(tfile);
+ }
synchronize_net();
tun_flow_delete_by_queue(tun, tun->numqueues + 1);
@@ -814,6 +822,7 @@ static int tun_attach(struct tun_struct
if (tfile->detached) {
tun_enable_queue(tfile);
+ tun_napi_enable(tfile);
} else {
sock_hold(&tfile->sk);
tun_napi_init(tun, tfile, napi, napi_frags);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 19/84] net: dp83822: disable false carrier interrupt
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (17 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 18/84] net: tun: stop NAPI when detaching queues Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 20/84] net: dp83822: disable rx error interrupt Greg Kroah-Hartman
` (70 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Enguerrand de Ribaucourt, Andrew Lunn,
Jakub Kicinski
From: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
commit c96614eeab663646f57f67aa591e015abd8bd0ba upstream.
When unplugging an Ethernet cable, false carrier events were produced by
the PHY at a very high rate. Once the false carrier counter full, an
interrupt was triggered every few clock cycles until the cable was
replugged. This resulted in approximately 10k/s interrupts.
Since the false carrier counter (FCSCR) is never used, we can safely
disable this interrupt.
In addition to improving performance, this also solved MDIO read
timeouts I was randomly encountering with an i.MX8 fec MAC because of
the interrupt flood. The interrupt count and MDIO timeout fix were
tested on a v5.4.110 kernel.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83822.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -244,7 +244,6 @@ static int dp83822_config_intr(struct ph
return misr_status;
misr_status |= (DP83822_RX_ERR_HF_INT_EN |
- DP83822_FALSE_CARRIER_HF_INT_EN |
DP83822_LINK_STAT_INT_EN |
DP83822_ENERGY_DET_INT_EN |
DP83822_LINK_QUAL_INT_EN);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 20/84] net: dp83822: disable rx error interrupt
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (18 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 19/84] net: dp83822: disable false carrier interrupt Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 21/84] RDMA/qedr: Fix reporting QP timeout attribute Greg Kroah-Hartman
` (69 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Enguerrand de Ribaucourt, Andrew Lunn,
Jakub Kicinski
From: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
commit 0e597e2affb90d6ea48df6890d882924acf71e19 upstream.
Some RX errors, notably when disconnecting the cable, increase the RCSR
register. Once half full (0x7fff), an interrupt flood is generated. I
measured ~3k/s interrupts even after the RX errors transfer was
stopped.
Since we don't read and clear the RCSR register, we should disable this
interrupt.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83822.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -243,8 +243,7 @@ static int dp83822_config_intr(struct ph
if (misr_status < 0)
return misr_status;
- misr_status |= (DP83822_RX_ERR_HF_INT_EN |
- DP83822_LINK_STAT_INT_EN |
+ misr_status |= (DP83822_LINK_STAT_INT_EN |
DP83822_ENERGY_DET_INT_EN |
DP83822_LINK_QUAL_INT_EN);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 21/84] RDMA/qedr: Fix reporting QP timeout attribute
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (19 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 20/84] net: dp83822: disable rx error interrupt Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 22/84] RDMA/cm: Fix memory leak in ib_cm_insert_listen Greg Kroah-Hartman
` (68 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Kamal Heib, Michal Kalderon ,
Leon Romanovsky
From: Kamal Heib <kamalheib1@gmail.com>
commit 118f767413ada4eef7825fbd4af7c0866f883441 upstream.
Make sure to save the passed QP timeout attribute when the QP gets modified,
so when calling query QP the right value is reported and not the
converted value that is required by the firmware. This issue was found
while running the pyverbs tests.
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/20220525132029.84813-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/qedr/qedr.h | 1 +
drivers/infiniband/hw/qedr/verbs.c | 4 +++-
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/hw/qedr/qedr.h
+++ b/drivers/infiniband/hw/qedr/qedr.h
@@ -418,6 +418,7 @@ struct qedr_qp {
u32 sq_psn;
u32 qkey;
u32 dest_qp_num;
+ u8 timeout;
/* Relevant to qps created from kernel space only (ULPs) */
u8 prev_wqe_size;
--- a/drivers/infiniband/hw/qedr/verbs.c
+++ b/drivers/infiniband/hw/qedr/verbs.c
@@ -2622,6 +2622,8 @@ int qedr_modify_qp(struct ib_qp *ibqp, s
1 << max_t(int, attr->timeout - 8, 0);
else
qp_params.ack_timeout = 0;
+
+ qp->timeout = attr->timeout;
}
if (attr_mask & IB_QP_RETRY_CNT) {
@@ -2781,7 +2783,7 @@ int qedr_query_qp(struct ib_qp *ibqp,
rdma_ah_set_dgid_raw(&qp_attr->ah_attr, ¶ms.dgid.bytes[0]);
rdma_ah_set_port_num(&qp_attr->ah_attr, 1);
rdma_ah_set_sl(&qp_attr->ah_attr, 0);
- qp_attr->timeout = params.timeout;
+ qp_attr->timeout = qp->timeout;
qp_attr->rnr_retry = params.rnr_retry;
qp_attr->retry_cnt = params.retry_cnt;
qp_attr->min_rnr_timer = params.min_rnr_nak_timer;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 22/84] RDMA/cm: Fix memory leak in ib_cm_insert_listen
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (20 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 21/84] RDMA/qedr: Fix reporting QP timeout attribute Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 23/84] linux/dim: Fix divide by 0 in RDMA DIM Greg Kroah-Hartman
` (67 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Jason Gunthorpe
From: Miaoqian Lin <linmq006@gmail.com>
commit 2990f223ffa7bb25422956b9f79f9176a5b38346 upstream.
cm_alloc_id_priv() allocates resource for the cm_id_priv. When
cm_init_listen() fails it doesn't free it, leading to memory leak.
Add the missing error unwind.
Fixes: 98f67156a80f ("RDMA/cm: Simplify establishing a listen cm_id")
Link: https://lore.kernel.org/r/20220621052546.4821-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/core/cm.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -1280,8 +1280,10 @@ struct ib_cm_id *ib_cm_insert_listen(str
return ERR_CAST(cm_id_priv);
err = cm_init_listen(cm_id_priv, service_id, 0);
- if (err)
+ if (err) {
+ ib_destroy_cm_id(&cm_id_priv->id);
return ERR_PTR(err);
+ }
spin_lock_irq(&cm_id_priv->lock);
listen_id_priv = cm_insert_listen(cm_id_priv, cm_handler);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 23/84] linux/dim: Fix divide by 0 in RDMA DIM
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (21 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 22/84] RDMA/cm: Fix memory leak in ib_cm_insert_listen Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 24/84] usbnet: fix memory allocation in helpers Greg Kroah-Hartman
` (66 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tao Liu, Max Gurtovoy,
Leon Romanovsky, Jason Gunthorpe
From: Tao Liu <thomas.liu@ucloud.cn>
commit 0fe3dbbefb74a8575f61d7801b08dbc50523d60d upstream.
Fix a divide 0 error in rdma_dim_stats_compare() when prev->cpe_ratio ==
0.
CallTrace:
Hardware name: H3C R4900 G3/RS33M2C9S, BIOS 2.00.37P21 03/12/2020
task: ffff880194b78000 task.stack: ffffc90006714000
RIP: 0010:backport_rdma_dim+0x10e/0x240 [mlx_compat]
RSP: 0018:ffff880c10e83ec0 EFLAGS: 00010202
RAX: 0000000000002710 RBX: ffff88096cd7f780 RCX: 0000000000000064
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000001
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 000000001d7c6c09
R13: ffff88096cd7f780 R14: ffff880b174fe800 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880c10e80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000a0965b00 CR3: 000000000200a003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
ib_poll_handler+0x43/0x80 [ib_core]
irq_poll_softirq+0xae/0x110
__do_softirq+0xd1/0x28c
irq_exit+0xde/0xf0
do_IRQ+0x54/0xe0
common_interrupt+0x8f/0x8f
</IRQ>
? cpuidle_enter_state+0xd9/0x2a0
? cpuidle_enter_state+0xc7/0x2a0
? do_idle+0x170/0x1d0
? cpu_startup_entry+0x6f/0x80
? start_secondary+0x1b9/0x210
? secondary_startup_64+0xa5/0xb0
Code: 0f 87 e1 00 00 00 8b 4c 24 14 44 8b 43 14 89 c8 4d 63 c8 44 29 c0 99 31 d0 29 d0 31 d2 48 98 48 8d 04 80 48 8d 04 80 48 c1 e0 02 <49> f7 f1 48 83 f8 0a 0f 86 c1 00 00 00 44 39 c1 7f 10 48 89 df
RIP: backport_rdma_dim+0x10e/0x240 [mlx_compat] RSP: ffff880c10e83ec0
Fixes: f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)")
Link: https://lore.kernel.org/r/20220627140004.3099-1-thomas.liu@ucloud.cn
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/dim.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/linux/dim.h
+++ b/include/linux/dim.h
@@ -21,7 +21,7 @@
* We consider 10% difference as significant.
*/
#define IS_SIGNIFICANT_DIFF(val, ref) \
- (((100UL * abs((val) - (ref))) / (ref)) > 10)
+ ((ref) && (((100UL * abs((val) - (ref))) / (ref)) > 10))
/*
* Calculate the gap between two values.
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 24/84] usbnet: fix memory allocation in helpers
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (22 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 23/84] linux/dim: Fix divide by 0 in RDMA DIM Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 25/84] net: ipv6: unexport __init-annotated seg6_hmac_net_init() Greg Kroah-Hartman
` (65 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Oliver Neukum, Jakub Kicinski
From: Oliver Neukum <oneukum@suse.com>
commit e65af5403e462ccd7dff6a045a886c64da598c2e upstream.
usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.
Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/usbnet.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1969,7 +1969,7 @@ static int __usbnet_read_cmd(struct usbn
cmd, reqtype, value, index, size);
if (size) {
- buf = kmalloc(size, GFP_KERNEL);
+ buf = kmalloc(size, GFP_NOIO);
if (!buf)
goto out;
}
@@ -2001,7 +2001,7 @@ static int __usbnet_write_cmd(struct usb
cmd, reqtype, value, index, size);
if (data) {
- buf = kmemdup(data, size, GFP_KERNEL);
+ buf = kmemdup(data, size, GFP_NOIO);
if (!buf)
goto out;
} else {
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 25/84] net: ipv6: unexport __init-annotated seg6_hmac_net_init()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (23 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 24/84] usbnet: fix memory allocation in helpers Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 26/84] NFSD: restore EINVAL error translation in nfsd_commit() Greg Kroah-Hartman
` (64 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, YueHaibing,
Jakub Kicinski
From: YueHaibing <yuehaibing@huawei.com>
commit 53ad46169fe2996fe1b623ba6c9c4fa33847876f upstream.
As of commit 5801f064e351 ("net: ipv6: unexport __init-annotated seg6_hmac_init()"),
EXPORT_SYMBOL and __init is a bad combination because the .init.text
section is freed up after the initialization. Hence, modules cannot
use symbols annotated __init. The access to a freed symbol may end up
with kernel panic.
This remove the EXPORT_SYMBOL to fix modpost warning:
WARNING: modpost: vmlinux.o(___ksymtab+seg6_hmac_net_init+0x0): Section mismatch in reference from the variable __ksymtab_seg6_hmac_net_init to the function .init.text:seg6_hmac_net_init()
The symbol seg6_hmac_net_init is exported and annotated __init
Fix this by removing the __init annotation of seg6_hmac_net_init or drop the export.
Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220628033134.21088-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/seg6_hmac.c | 1 -
1 file changed, 1 deletion(-)
--- a/net/ipv6/seg6_hmac.c
+++ b/net/ipv6/seg6_hmac.c
@@ -409,7 +409,6 @@ int __net_init seg6_hmac_net_init(struct
return 0;
}
-EXPORT_SYMBOL(seg6_hmac_net_init);
void seg6_hmac_exit(void)
{
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 26/84] NFSD: restore EINVAL error translation in nfsd_commit()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (24 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 25/84] net: ipv6: unexport __init-annotated seg6_hmac_net_init() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 27/84] caif_virtio: fix race between virtio_device_ready() and ndo_open() Greg Kroah-Hartman
` (63 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexey Khoroshilov, Chuck Lever
From: Alexey Khoroshilov <khoroshilov@ispras.ru>
commit 8a9ffb8c857c2c99403bd6483a5a005fed5c0773 upstream.
commit 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t")
incidentally broke translation of -EINVAL to nfserr_notsupp.
The patch restores that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 555dbf1a9aac ("nfsd: Replace use of rwsem with errseq_t")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/nfsd/vfs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1156,6 +1156,7 @@ nfsd_commit(struct svc_rqst *rqstp, stru
nfsd_net_id));
err2 = filemap_check_wb_err(nf->nf_file->f_mapping,
since);
+ err = nfserrno(err2);
break;
case -EINVAL:
err = nfserr_notsupp;
@@ -1163,8 +1164,8 @@ nfsd_commit(struct svc_rqst *rqstp, stru
default:
nfsd_reset_boot_verifier(net_generic(nf->nf_net,
nfsd_net_id));
+ err = nfserrno(err2);
}
- err = nfserrno(err2);
} else
nfsd_copy_boot_verifier(verf, net_generic(nf->nf_net,
nfsd_net_id));
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 27/84] caif_virtio: fix race between virtio_device_ready() and ndo_open()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (25 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 26/84] NFSD: restore EINVAL error translation in nfsd_commit() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 28/84] PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events Greg Kroah-Hartman
` (62 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jason Wang, Michael S. Tsirkin
From: Jason Wang <jasowang@redhat.com>
commit 11a37eb66812ce6a06b79223ad530eb0e1d7294d upstream.
We currently depend on probe() calling virtio_device_ready() -
which happens after netdev
registration. Since ndo_open() can be called immediately
after register_netdev, this means there exists a race between
ndo_open() and virtio_device_ready(): the driver may start to use the
device (e.g. TX) before DRIVER_OK which violates the spec.
Fix this by switching to use register_netdevice() and protect the
virtio_device_ready() with rtnl_lock() to make sure ndo_open() can
only be called after virtio_device_ready().
Fixes: 0d2e1a2926b18 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220620051115.3142-3-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/caif/caif_virtio.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/net/caif/caif_virtio.c
+++ b/drivers/net/caif/caif_virtio.c
@@ -723,13 +723,21 @@ static int cfv_probe(struct virtio_devic
/* Carrier is off until netdevice is opened */
netif_carrier_off(netdev);
+ /* serialize netdev register + virtio_device_ready() with ndo_open() */
+ rtnl_lock();
+
/* register Netdev */
- err = register_netdev(netdev);
+ err = register_netdevice(netdev);
if (err) {
+ rtnl_unlock();
dev_err(&vdev->dev, "Unable to register netdev (%d)\n", err);
goto err;
}
+ virtio_device_ready(vdev);
+
+ rtnl_unlock();
+
debugfs_init(cfv);
return 0;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 28/84] PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (26 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 27/84] caif_virtio: fix race between virtio_device_ready() and ndo_open() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 29/84] s390: remove unneeded select BUILD_BIN2C Greg Kroah-Hartman
` (61 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miaoqian Lin, Chanwoo Choi
From: Miaoqian Lin <linmq006@gmail.com>
commit f44b799603a9b5d2e375b0b2d54dd0b791eddfc2 upstream.
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
This function only calls of_node_put() in normal path,
missing it in error paths.
Add missing of_node_put() to avoid refcount leak.
Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/devfreq/event/exynos-ppmu.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/devfreq/event/exynos-ppmu.c
+++ b/drivers/devfreq/event/exynos-ppmu.c
@@ -514,15 +514,19 @@ static int of_get_devfreq_events(struct
count = of_get_child_count(events_np);
desc = devm_kcalloc(dev, count, sizeof(*desc), GFP_KERNEL);
- if (!desc)
+ if (!desc) {
+ of_node_put(events_np);
return -ENOMEM;
+ }
info->num_events = count;
of_id = of_match_device(exynos_ppmu_id_match, dev);
if (of_id)
info->ppmu_type = (enum exynos_ppmu_type)of_id->data;
- else
+ else {
+ of_node_put(events_np);
return -EINVAL;
+ }
j = 0;
for_each_child_of_node(events_np, node) {
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 29/84] s390: remove unneeded select BUILD_BIN2C
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (27 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 28/84] PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 30/84] netfilter: nft_dynset: restore set element counter when failing to update Greg Kroah-Hartman
` (60 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Masahiro Yamada, Alexander Gordeev
From: Masahiro Yamada <masahiroy@kernel.org>
commit 25deecb21c18ee29e3be8ac6177b2a9504c33d2d upstream.
Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"),
s390 builds the purgatory without using bin2c.
Remove 'select BUILD_BIN2C' to avoid the unneeded build of bin2c.
Fixes: 4c0f032d4963 ("s390/purgatory: Omit use of bin2c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-1-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/s390/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -507,7 +507,6 @@ config KEXEC
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
- select BUILD_BIN2C
depends on CRYPTO
depends on CRYPTO_SHA256
depends on CRYPTO_SHA256_S390
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 30/84] netfilter: nft_dynset: restore set element counter when failing to update
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (28 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 29/84] s390: remove unneeded select BUILD_BIN2C Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 31/84] net/sched: act_api: Notify user space if any actions were flushed before error Greg Kroah-Hartman
` (59 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso
From: Pablo Neira Ayuso <pablo@netfilter.org>
commit 05907f10e235680cc7fb196810e4ad3215d5e648 upstream.
This patch fixes a race condition.
nft_rhash_update() might fail for two reasons:
- Element already exists in the hashtable.
- Another packet won race to insert an entry in the hashtable.
In both cases, new() has already bumped the counter via atomic_add_unless(),
therefore, decrement the set element counter.
Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netfilter/nft_set_hash.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/netfilter/nft_set_hash.c
+++ b/net/netfilter/nft_set_hash.c
@@ -142,6 +142,7 @@ static bool nft_rhash_update(struct nft_
/* Another cpu may race to insert the element with the same key */
if (prev) {
nft_set_elem_destroy(set, he, true);
+ atomic_dec(&set->nelems);
he = prev;
}
@@ -151,6 +152,7 @@ out:
err2:
nft_set_elem_destroy(set, he, true);
+ atomic_dec(&set->nelems);
err1:
return false;
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 31/84] net/sched: act_api: Notify user space if any actions were flushed before error
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (29 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 30/84] netfilter: nft_dynset: restore set element counter when failing to update Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 32/84] net: bonding: fix possible NULL deref in rlb code Greg Kroah-Hartman
` (58 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Victor Nogueira, Jamal Hadi Salim,
Jakub Kicinski
From: Victor Nogueira <victor@mojatatu.com>
commit 76b39b94382f9e0a639e1c70c3253de248cc4c83 upstream.
If during an action flush operation one of the actions is still being
referenced, the flush operation is aborted and the kernel returns to
user space with an error. However, if the kernel was able to flush, for
example, 3 actions and failed on the fourth, the kernel will not notify
user space that it deleted 3 actions before failing.
This patch fixes that behaviour by notifying user space of how many
actions were deleted before flush failed and by setting extack with a
message describing what happened.
Fixes: 55334a5db5cd ("net_sched: act: refuse to remove bound action outside")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/act_api.c | 22 ++++++++++++++--------
1 file changed, 14 insertions(+), 8 deletions(-)
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -302,7 +302,8 @@ static int tcf_idr_release_unsafe(struct
}
static int tcf_del_walker(struct tcf_idrinfo *idrinfo, struct sk_buff *skb,
- const struct tc_action_ops *ops)
+ const struct tc_action_ops *ops,
+ struct netlink_ext_ack *extack)
{
struct nlattr *nest;
int n_i = 0;
@@ -318,20 +319,25 @@ static int tcf_del_walker(struct tcf_idr
if (nla_put_string(skb, TCA_KIND, ops->kind))
goto nla_put_failure;
+ ret = 0;
mutex_lock(&idrinfo->lock);
idr_for_each_entry_ul(idr, p, tmp, id) {
if (IS_ERR(p))
continue;
ret = tcf_idr_release_unsafe(p);
- if (ret == ACT_P_DELETED) {
+ if (ret == ACT_P_DELETED)
module_put(ops->owner);
- n_i++;
- } else if (ret < 0) {
- mutex_unlock(&idrinfo->lock);
- goto nla_put_failure;
- }
+ else if (ret < 0)
+ break;
+ n_i++;
}
mutex_unlock(&idrinfo->lock);
+ if (ret < 0) {
+ if (n_i)
+ NL_SET_ERR_MSG(extack, "Unable to flush all TC actions");
+ else
+ goto nla_put_failure;
+ }
ret = nla_put_u32(skb, TCA_FCNT, n_i);
if (ret)
@@ -352,7 +358,7 @@ int tcf_generic_walker(struct tc_action_
struct tcf_idrinfo *idrinfo = tn->idrinfo;
if (type == RTM_DELACTION) {
- return tcf_del_walker(idrinfo, skb, ops);
+ return tcf_del_walker(idrinfo, skb, ops, extack);
} else if (type == RTM_GETACTION) {
return tcf_dump_walker(idrinfo, skb, cb);
} else {
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 32/84] net: bonding: fix possible NULL deref in rlb code
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (30 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 31/84] net/sched: act_api: Notify user space if any actions were flushed before error Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 33/84] net: bonding: fix use-after-free after 802.3ad slave unbind Greg Kroah-Hartman
` (57 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Eric Dumazet, Jay Vosburgh,
Veaceslav Falico, Andy Gospodarek, Jay Vosburgh, Paolo Abeni
From: Eric Dumazet <edumazet@google.com>
commit ab84db251c04d38b8dc7ee86e13d4050bedb1c88 upstream.
syzbot has two reports involving the same root cause.
bond_alb_initialize() must not set bond->alb_info.rlb_enabled
if a memory allocation error is detected.
Report 1:
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393
Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014
RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663
__bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370
bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline]
bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839
default_device_exit_batch+0x449/0x590 net/core/dev.c:11333
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
Report 2:
general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502
Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49
RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000
RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030
RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80
R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000
FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070
bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765
bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173
bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253
bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159
do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577
rtnl_newlink_create net/core/rtnetlink.c:3380 [inline]
__rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f6f45a89109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006
RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_alb.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1279,12 +1279,12 @@ int bond_alb_initialize(struct bonding *
return res;
if (rlb_enabled) {
- bond->alb_info.rlb_enabled = 1;
res = rlb_initialize(bond);
if (res) {
tlb_deinitialize(bond);
return res;
}
+ bond->alb_info.rlb_enabled = 1;
} else {
bond->alb_info.rlb_enabled = 0;
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 33/84] net: bonding: fix use-after-free after 802.3ad slave unbind
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (31 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 32/84] net: bonding: fix possible NULL deref in rlb code Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 34/84] nfc: nfcmrvl: Fix irq_of_parse_and_map() return value Greg Kroah-Hartman
` (56 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Maksym Glubokiy, Yevhen Orlov,
Jay Vosburgh, Jakub Kicinski
From: Yevhen Orlov <yevhen.orlov@plvision.eu>
commit 050133e1aa2cb49bb17be847d48a4431598ef562 upstream.
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.
Fix with checking actual number of ports in group (as was before
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().
The KASAN logs are as follows:
[ 767.617392] ==================================================================
[ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470
[ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767
[ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15
[ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler
[ 767.666468] Call trace:
[ 767.668930] dump_backtrace+0x0/0x2d0
[ 767.672625] show_stack+0x24/0x30
[ 767.675965] dump_stack_lvl+0x68/0x84
[ 767.679659] print_address_description.constprop.0+0x74/0x2b8
[ 767.685451] kasan_report+0x1f0/0x260
[ 767.689148] __asan_load2+0x94/0xd0
[ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470
Fixes: 0622cab0341c ("bonding: fix 802.3ad aggregator reselection")
Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_3ad.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2209,7 +2209,8 @@ void bond_3ad_unbind_slave(struct slave
temp_aggregator->num_of_ports--;
if (__agg_active_ports(temp_aggregator) == 0) {
select_new_active_agg = temp_aggregator->is_active;
- ad_clear_agg(temp_aggregator);
+ if (temp_aggregator->num_of_ports == 0)
+ ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
slave_info(bond->dev, slave->dev, "Removing an active aggregator\n");
/* select new active aggregator */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 34/84] nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (32 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 33/84] net: bonding: fix use-after-free after 802.3ad slave unbind Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 35/84] NFC: nxp-nci: Dont issue a zero length i2c_master_read() Greg Kroah-Hartman
` (55 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lv Ruyi, Krzysztof Kozlowski,
Jakub Kicinski
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
commit 5a478a653b4cca148d5c89832f007ec0809d7e6d upstream.
The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.
Reported-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220627124048.296253-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/nfcmrvl/i2c.c | 6 +++---
drivers/nfc/nfcmrvl/spi.c | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/nfc/nfcmrvl/i2c.c
+++ b/drivers/nfc/nfcmrvl/i2c.c
@@ -186,9 +186,9 @@ static int nfcmrvl_i2c_parse_dt(struct d
pdata->irq_polarity = IRQF_TRIGGER_RISING;
ret = irq_of_parse_and_map(node, 0);
- if (ret < 0) {
- pr_err("Unable to get irq, error: %d\n", ret);
- return ret;
+ if (!ret) {
+ pr_err("Unable to get irq\n");
+ return -EINVAL;
}
pdata->irq = ret;
--- a/drivers/nfc/nfcmrvl/spi.c
+++ b/drivers/nfc/nfcmrvl/spi.c
@@ -129,9 +129,9 @@ static int nfcmrvl_spi_parse_dt(struct d
}
ret = irq_of_parse_and_map(node, 0);
- if (ret < 0) {
- pr_err("Unable to get irq, error: %d\n", ret);
- return ret;
+ if (!ret) {
+ pr_err("Unable to get irq\n");
+ return -EINVAL;
}
pdata->irq = ret;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 35/84] NFC: nxp-nci: Dont issue a zero length i2c_master_read()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (33 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 34/84] nfc: nfcmrvl: Fix irq_of_parse_and_map() return value Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:57 ` [PATCH 5.10 36/84] tipc: move bc link creation back to tipc_node_create Greg Kroah-Hartman
` (54 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Michael Walle, Krzysztof Kozlowski,
David S. Miller
From: Michael Walle <michael@walle.cc>
commit eddd95b9423946aaacb55cac6a9b2cea8ab944fc upstream.
There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.
Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/nfc/nxp-nci/i2c.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -162,6 +162,9 @@ static int nxp_nci_i2c_nci_read(struct n
skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE);
+ if (!header.plen)
+ return 0;
+
r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
if (r != header.plen) {
nfc_err(&client->dev,
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 36/84] tipc: move bc link creation back to tipc_node_create
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (34 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 35/84] NFC: nxp-nci: Dont issue a zero length i2c_master_read() Greg Kroah-Hartman
@ 2022-07-05 11:57 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 37/84] epic100: fix use after free on rmmod Greg Kroah-Hartman
` (53 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:57 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shuang Li, Xin Long, Jon Maloy,
David S. Miller
From: Xin Long <lucien.xin@gmail.com>
commit cb8092d70a6f5f01ec1490fce4d35efed3ed996c upstream.
Shuang Li reported a NULL pointer dereference crash:
[] BUG: kernel NULL pointer dereference, address: 0000000000000068
[] RIP: 0010:tipc_link_is_up+0x5/0x10 [tipc]
[] Call Trace:
[] <IRQ>
[] tipc_bcast_rcv+0xa2/0x190 [tipc]
[] tipc_node_bc_rcv+0x8b/0x200 [tipc]
[] tipc_rcv+0x3af/0x5b0 [tipc]
[] tipc_udp_recv+0xc7/0x1e0 [tipc]
It was caused by the 'l' passed into tipc_bcast_rcv() is NULL. When it
creates a node in tipc_node_check_dest(), after inserting the new node
into hashtable in tipc_node_create(), it creates the bc link. However,
there is a gap between this insert and bc link creation, a bc packet
may come in and get the node from the hashtable then try to dereference
its bc link, which is NULL.
This patch is to fix it by moving the bc link creation before inserting
into the hashtable.
Note that for a preliminary node becoming "real", the bc link creation
should also be called before it's rehashed, as we don't create it for
preliminary nodes.
Fixes: 4cbf8ac2fe5a ("tipc: enable creating a "preliminary" node")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/tipc/node.c | 41 ++++++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 19 deletions(-)
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -456,8 +456,8 @@ struct tipc_node *tipc_node_create(struc
bool preliminary)
{
struct tipc_net *tn = net_generic(net, tipc_net_id);
+ struct tipc_link *l, *snd_l = tipc_bc_sndlink(net);
struct tipc_node *n, *temp_node;
- struct tipc_link *l;
unsigned long intv;
int bearer_id;
int i;
@@ -472,6 +472,16 @@ struct tipc_node *tipc_node_create(struc
goto exit;
/* A preliminary node becomes "real" now, refresh its data */
tipc_node_write_lock(n);
+ if (!tipc_link_bc_create(net, tipc_own_addr(net), addr, peer_id, U16_MAX,
+ tipc_link_min_win(snd_l), tipc_link_max_win(snd_l),
+ n->capabilities, &n->bc_entry.inputq1,
+ &n->bc_entry.namedq, snd_l, &n->bc_entry.link)) {
+ pr_warn("Broadcast rcv link refresh failed, no memory\n");
+ tipc_node_write_unlock_fast(n);
+ tipc_node_put(n);
+ n = NULL;
+ goto exit;
+ }
n->preliminary = false;
n->addr = addr;
hlist_del_rcu(&n->hash);
@@ -551,7 +561,16 @@ update:
n->signature = INVALID_NODE_SIG;
n->active_links[0] = INVALID_BEARER_ID;
n->active_links[1] = INVALID_BEARER_ID;
- n->bc_entry.link = NULL;
+ if (!preliminary &&
+ !tipc_link_bc_create(net, tipc_own_addr(net), addr, peer_id, U16_MAX,
+ tipc_link_min_win(snd_l), tipc_link_max_win(snd_l),
+ n->capabilities, &n->bc_entry.inputq1,
+ &n->bc_entry.namedq, snd_l, &n->bc_entry.link)) {
+ pr_warn("Broadcast rcv link creation failed, no memory\n");
+ kfree(n);
+ n = NULL;
+ goto exit;
+ }
tipc_node_get(n);
timer_setup(&n->timer, tipc_node_timeout, 0);
/* Start a slow timer anyway, crypto needs it */
@@ -1128,7 +1147,7 @@ void tipc_node_check_dest(struct net *ne
bool *respond, bool *dupl_addr)
{
struct tipc_node *n;
- struct tipc_link *l, *snd_l;
+ struct tipc_link *l;
struct tipc_link_entry *le;
bool addr_match = false;
bool sign_match = false;
@@ -1148,22 +1167,6 @@ void tipc_node_check_dest(struct net *ne
return;
tipc_node_write_lock(n);
- if (unlikely(!n->bc_entry.link)) {
- snd_l = tipc_bc_sndlink(net);
- if (!tipc_link_bc_create(net, tipc_own_addr(net),
- addr, peer_id, U16_MAX,
- tipc_link_min_win(snd_l),
- tipc_link_max_win(snd_l),
- n->capabilities,
- &n->bc_entry.inputq1,
- &n->bc_entry.namedq, snd_l,
- &n->bc_entry.link)) {
- pr_warn("Broadcast rcv link creation failed, no mem\n");
- tipc_node_write_unlock_fast(n);
- tipc_node_put(n);
- return;
- }
- }
le = &n->links[b->identity];
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 37/84] epic100: fix use after free on rmmod
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (35 preceding siblings ...)
2022-07-05 11:57 ` [PATCH 5.10 36/84] tipc: move bc link creation back to tipc_node_create Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 38/84] io_uring: ensure that send/sendmsg and recv/recvmsg check sqe->ioprio Greg Kroah-Hartman
` (52 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Yilun Wu, Tong Zhang, Francois Romieu,
Jakub Kicinski
From: Tong Zhang <ztong0001@gmail.com>
commit 8ee9d82cd0a45e7d050ade598c9f33032a0f2891 upstream.
epic_close() calls epic_rx() and uses dma buffer, but in epic_remove_one()
we already freed the dma buffer. To fix this issue, reorder function calls
like in the .probe function.
BUG: KASAN: use-after-free in epic_rx+0xa6/0x7e0 [epic100]
Call Trace:
epic_rx+0xa6/0x7e0 [epic100]
epic_close+0xec/0x2f0 [epic100]
unregister_netdev+0x18/0x20
epic_remove_one+0xaa/0xf0 [epic100]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yilun Wu <yiluwu@cs.stonybrook.edu>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20220627043351.25615-1-ztong0001@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/smsc/epic100.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/smsc/epic100.c
+++ b/drivers/net/ethernet/smsc/epic100.c
@@ -1513,14 +1513,14 @@ static void epic_remove_one(struct pci_d
struct net_device *dev = pci_get_drvdata(pdev);
struct epic_private *ep = netdev_priv(dev);
+ unregister_netdev(dev);
dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, ep->tx_ring,
ep->tx_ring_dma);
dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, ep->rx_ring,
ep->rx_ring_dma);
- unregister_netdev(dev);
pci_iounmap(pdev, ep->ioaddr);
- pci_release_regions(pdev);
free_netdev(dev);
+ pci_release_regions(pdev);
pci_disable_device(pdev);
/* pci_power_off(pdev, -1); */
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 38/84] io_uring: ensure that send/sendmsg and recv/recvmsg check sqe->ioprio
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (36 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 37/84] epic100: fix use after free on rmmod Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 39/84] tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Greg Kroah-Hartman
` (51 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jens Axboe
From: Jens Axboe <axboe@kernel.dk>
commit 73911426aaaadbae54fa72359b33a7b6a56947db upstream.
All other opcodes correctly check if this is set and -EINVAL if it is
and they don't support that field, for some reason the these were
forgotten.
This was unified a bit differently in the upstream tree, but had the
same effect as making sure we error on this field. Rather than have
a painful backport of the upstream commit, just fixup the mentioned
opcodes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/io_uring.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -4366,6 +4366,8 @@ static int io_sendmsg_prep(struct io_kio
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
+ if (unlikely(sqe->addr2 || sqe->splice_fd_in || sqe->ioprio))
+ return -EINVAL;
sr->msg_flags = READ_ONCE(sqe->msg_flags);
sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
@@ -4601,6 +4603,8 @@ static int io_recvmsg_prep(struct io_kio
if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL))
return -EINVAL;
+ if (unlikely(sqe->addr2 || sqe->splice_fd_in || sqe->ioprio))
+ return -EINVAL;
sr->msg_flags = READ_ONCE(sqe->msg_flags);
sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr));
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 39/84] tunnels: do not assume mac header is set in skb_tunnel_check_pmtu()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (37 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 38/84] io_uring: ensure that send/sendmsg and recv/recvmsg check sqe->ioprio Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 40/84] net: tun: avoid disabling NAPI twice Greg Kroah-Hartman
` (50 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Eric Dumazet, Stefano Brivio,
David S. Miller
From: Eric Dumazet <edumazet@google.com>
commit 853a7614880231747040cada91d2b8d2e995c51a upstream.
Recently added debug in commit f9aefd6b2aa3 ("net: warn if mac header
was not set") caught a bug in skb_tunnel_check_pmtu(), as shown
in this syzbot report [1].
In ndo_start_xmit() paths, there is really no need to use skb->mac_header,
because skb->data is supposed to point at it.
[1] WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_mac_header_len include/linux/skbuff.h:2784 [inline]
WARNING: CPU: 1 PID: 8604 at include/linux/skbuff.h:2784 skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413
Modules linked in:
CPU: 1 PID: 8604 Comm: syz-executor.3 Not tainted 5.19.0-rc2-syzkaller-00443-g8720bd951b8e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:skb_mac_header_len include/linux/skbuff.h:2784 [inline]
RIP: 0010:skb_tunnel_check_pmtu+0x5de/0x2f90 net/ipv4/ip_tunnel_core.c:413
Code: 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 80 3c 02 00 0f 84 b9 fe ff ff 4c 89 ff e8 7c 0f d7 f9 e9 ac fe ff ff e8 c2 13 8a f9 <0f> 0b e9 28 fc ff ff e8 b6 13 8a f9 48 8b 54 24 70 48 b8 00 00 00
RSP: 0018:ffffc90002e4f520 EFLAGS: 00010212
RAX: 0000000000000324 RBX: ffff88804d5fd500 RCX: ffffc90005b52000
RDX: 0000000000040000 RSI: ffffffff87f05e3e RDI: 0000000000000003
RBP: ffffc90002e4f650 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: 000000000000ffff
R13: 0000000000000000 R14: 000000000000ffcd R15: 000000000000001f
FS: 00007f3babba9700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000075319000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
geneve_xmit_skb drivers/net/geneve.c:927 [inline]
geneve_xmit+0xcf8/0x35d0 drivers/net/geneve.c:1107
__netdev_start_xmit include/linux/netdevice.h:4805 [inline]
netdev_start_xmit include/linux/netdevice.h:4819 [inline]
__dev_direct_xmit+0x500/0x730 net/core/dev.c:4309
dev_direct_xmit include/linux/netdevice.h:3007 [inline]
packet_direct_xmit+0x1b8/0x2c0 net/packet/af_packet.c:282
packet_snd net/packet/af_packet.c:3073 [inline]
packet_sendmsg+0x21f4/0x55d0 net/packet/af_packet.c:3104
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2489
___sys_sendmsg+0xf3/0x170 net/socket.c:2543
__sys_sendmsg net/socket.c:2572 [inline]
__do_sys_sendmsg net/socket.c:2581 [inline]
__se_sys_sendmsg net/socket.c:2579 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f3baaa89109
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f3babba9168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f3baab9bf60 RCX: 00007f3baaa89109
RDX: 0000000000000000 RSI: 0000000020000a00 RDI: 0000000000000003
RBP: 00007f3baaae305d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe74f2543f R14: 00007f3babba9300 R15: 0000000000022000
</TASK>
Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/ip_tunnel_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c
index 6b2dc7b2b612..cc1caab4a654 100644
--- a/net/ipv4/ip_tunnel_core.c
+++ b/net/ipv4/ip_tunnel_core.c
@@ -410,7 +410,7 @@ int skb_tunnel_check_pmtu(struct sk_buff *skb, struct dst_entry *encap_dst,
u32 mtu = dst_mtu(encap_dst) - headroom;
if ((skb_is_gso(skb) && skb_gso_validate_network_len(skb, mtu)) ||
- (!skb_is_gso(skb) && (skb->len - skb_mac_header_len(skb)) <= mtu))
+ (!skb_is_gso(skb) && (skb->len - skb_network_offset(skb)) <= mtu))
return 0;
skb_dst_update_pmtu_no_confirm(skb, mtu);
--
2.37.0
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 40/84] net: tun: avoid disabling NAPI twice
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (38 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 39/84] tunnels: do not assume mac header is set in skb_tunnel_check_pmtu() Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 41/84] xfs: use current->journal_info for detecting transaction recursion Greg Kroah-Hartman
` (49 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, syzbot, Eric Dumazet, Jakub Kicinski
From: Jakub Kicinski <kuba@kernel.org>
commit ff1fa2081d173b01cebe2fbf0a2d0f1cee9ce4b5 upstream.
Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.
Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.
Fixes: a8fc8cb5692a ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/tun.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -646,7 +646,8 @@ static void __tun_detach(struct tun_file
tun = rtnl_dereference(tfile->tun);
if (tun && clean) {
- tun_napi_disable(tfile);
+ if (!tfile->detached)
+ tun_napi_disable(tfile);
tun_napi_del(tfile);
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 41/84] xfs: use current->journal_info for detecting transaction recursion
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (39 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 40/84] net: tun: avoid disabling NAPI twice Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 42/84] xfs: rename variable mp to parsing_mp Greg Kroah-Hartman
` (48 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dave Chinner, Darrick J. Wong,
Christoph Hellwig, Amir Goldstein
From: Dave Chinner <dchinner@redhat.com>
commit 756b1c343333a5aefcc26b0409f3fd16f72281bf upstream.
Because the iomap code using PF_MEMALLOC_NOFS to detect transaction
recursion in XFS is just wrong. Remove it from the iomap code and
replace it with XFS specific internal checks using
current->journal_info instead.
[djwong: This change also realigns the lifetime of NOFS flag changes to
match the incore transaction, instead of the inconsistent scheme we have
now.]
Fixes: 9070733b4efa ("xfs: abstract PF_FSTRANS to PF_MEMALLOC_NOFS")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/iomap/buffered-io.c | 7 -------
fs/xfs/libxfs/xfs_btree.c | 12 ++++++++++--
fs/xfs/xfs_aops.c | 17 +++++++++++++++--
fs/xfs/xfs_trans.c | 20 +++++---------------
fs/xfs/xfs_trans.h | 30 ++++++++++++++++++++++++++++++
5 files changed, 60 insertions(+), 26 deletions(-)
--- a/fs/iomap/buffered-io.c
+++ b/fs/iomap/buffered-io.c
@@ -1461,13 +1461,6 @@ iomap_do_writepage(struct page *page, st
goto redirty;
/*
- * Given that we do not allow direct reclaim to call us, we should
- * never be called in a recursive filesystem reclaim context.
- */
- if (WARN_ON_ONCE(current->flags & PF_MEMALLOC_NOFS))
- goto redirty;
-
- /*
* Is this page beyond the end of the file?
*
* The page index is less than the end_index, adjust the end_offset
--- a/fs/xfs/libxfs/xfs_btree.c
+++ b/fs/xfs/libxfs/xfs_btree.c
@@ -2811,7 +2811,7 @@ xfs_btree_split_worker(
struct xfs_btree_split_args *args = container_of(work,
struct xfs_btree_split_args, work);
unsigned long pflags;
- unsigned long new_pflags = PF_MEMALLOC_NOFS;
+ unsigned long new_pflags = 0;
/*
* we are in a transaction context here, but may also be doing work
@@ -2823,12 +2823,20 @@ xfs_btree_split_worker(
new_pflags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD;
current_set_flags_nested(&pflags, new_pflags);
+ xfs_trans_set_context(args->cur->bc_tp);
args->result = __xfs_btree_split(args->cur, args->level, args->ptrp,
args->key, args->curp, args->stat);
- complete(args->done);
+ xfs_trans_clear_context(args->cur->bc_tp);
current_restore_flags_nested(&pflags, new_pflags);
+
+ /*
+ * Do not access args after complete() has run here. We don't own args
+ * and the owner may run and free args before we return here.
+ */
+ complete(args->done);
+
}
/*
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -62,7 +62,7 @@ xfs_setfilesize_trans_alloc(
* We hand off the transaction to the completion thread now, so
* clear the flag here.
*/
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
+ xfs_trans_clear_context(tp);
return 0;
}
@@ -125,7 +125,7 @@ xfs_setfilesize_ioend(
* thus we need to mark ourselves as being in a transaction manually.
* Similarly for freeze protection.
*/
- current_set_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
+ xfs_trans_set_context(tp);
__sb_writers_acquired(VFS_I(ip)->i_sb, SB_FREEZE_FS);
/* we abort the update if there was an IO error */
@@ -577,6 +577,12 @@ xfs_vm_writepage(
{
struct xfs_writepage_ctx wpc = { };
+ if (WARN_ON_ONCE(current->journal_info)) {
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return 0;
+ }
+
return iomap_writepage(page, wbc, &wpc.ctx, &xfs_writeback_ops);
}
@@ -587,6 +593,13 @@ xfs_vm_writepages(
{
struct xfs_writepage_ctx wpc = { };
+ /*
+ * Writing back data in a transaction context can result in recursive
+ * transactions. This is bad, so issue a warning and get out of here.
+ */
+ if (WARN_ON_ONCE(current->journal_info))
+ return 0;
+
xfs_iflags_clear(XFS_I(mapping->host), XFS_ITRUNCATED);
return iomap_writepages(mapping, wbc, &wpc.ctx, &xfs_writeback_ops);
}
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -68,6 +68,7 @@ xfs_trans_free(
xfs_extent_busy_clear(tp->t_mountp, &tp->t_busy, false);
trace_xfs_trans_free(tp, _RET_IP_);
+ xfs_trans_clear_context(tp);
if (!(tp->t_flags & XFS_TRANS_NO_WRITECOUNT))
sb_end_intwrite(tp->t_mountp->m_super);
xfs_trans_free_dqinfo(tp);
@@ -119,7 +120,8 @@ xfs_trans_dup(
ntp->t_rtx_res = tp->t_rtx_res - tp->t_rtx_res_used;
tp->t_rtx_res = tp->t_rtx_res_used;
- ntp->t_pflags = tp->t_pflags;
+
+ xfs_trans_switch_context(tp, ntp);
/* move deferred ops over to the new tp */
xfs_defer_move(ntp, tp);
@@ -153,9 +155,6 @@ xfs_trans_reserve(
int error = 0;
bool rsvd = (tp->t_flags & XFS_TRANS_RESERVE) != 0;
- /* Mark this thread as being in a transaction */
- current_set_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
-
/*
* Attempt to reserve the needed disk blocks by decrementing
* the number needed from the number available. This will
@@ -163,10 +162,8 @@ xfs_trans_reserve(
*/
if (blocks > 0) {
error = xfs_mod_fdblocks(mp, -((int64_t)blocks), rsvd);
- if (error != 0) {
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
+ if (error != 0)
return -ENOSPC;
- }
tp->t_blk_res += blocks;
}
@@ -240,9 +237,6 @@ undo_blocks:
xfs_mod_fdblocks(mp, (int64_t)blocks, rsvd);
tp->t_blk_res = 0;
}
-
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
-
return error;
}
@@ -266,6 +260,7 @@ xfs_trans_alloc(
tp = kmem_cache_zalloc(xfs_trans_zone, GFP_KERNEL | __GFP_NOFAIL);
if (!(flags & XFS_TRANS_NO_WRITECOUNT))
sb_start_intwrite(mp->m_super);
+ xfs_trans_set_context(tp);
/*
* Zero-reservation ("empty") transactions can't modify anything, so
@@ -878,7 +873,6 @@ __xfs_trans_commit(
xfs_log_commit_cil(mp, tp, &commit_lsn, regrant);
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
xfs_trans_free(tp);
/*
@@ -910,7 +904,6 @@ out_unreserve:
xfs_log_ticket_ungrant(mp->m_log, tp->t_ticket);
tp->t_ticket = NULL;
}
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
xfs_trans_free_items(tp, !!error);
xfs_trans_free(tp);
@@ -970,9 +963,6 @@ xfs_trans_cancel(
tp->t_ticket = NULL;
}
- /* mark this thread as no longer being in a transaction */
- current_restore_flags_nested(&tp->t_pflags, PF_MEMALLOC_NOFS);
-
xfs_trans_free_items(tp, dirty);
xfs_trans_free(tp);
}
--- a/fs/xfs/xfs_trans.h
+++ b/fs/xfs/xfs_trans.h
@@ -268,4 +268,34 @@ xfs_trans_item_relog(
return lip->li_ops->iop_relog(lip, tp);
}
+static inline void
+xfs_trans_set_context(
+ struct xfs_trans *tp)
+{
+ ASSERT(current->journal_info == NULL);
+ tp->t_pflags = memalloc_nofs_save();
+ current->journal_info = tp;
+}
+
+static inline void
+xfs_trans_clear_context(
+ struct xfs_trans *tp)
+{
+ if (current->journal_info == tp) {
+ memalloc_nofs_restore(tp->t_pflags);
+ current->journal_info = NULL;
+ }
+}
+
+static inline void
+xfs_trans_switch_context(
+ struct xfs_trans *old_tp,
+ struct xfs_trans *new_tp)
+{
+ ASSERT(current->journal_info == old_tp);
+ new_tp->t_pflags = old_tp->t_pflags;
+ old_tp->t_pflags = 0;
+ current->journal_info = new_tp;
+}
+
#endif /* __XFS_TRANS_H__ */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 42/84] xfs: rename variable mp to parsing_mp
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (40 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 41/84] xfs: use current->journal_info for detecting transaction recursion Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 43/84] xfs: Skip repetitive warnings about mount options Greg Kroah-Hartman
` (47 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Sandeen, Pavel Reichl,
Darrick J. Wong, Carlos Maiolino, Amir Goldstein
From: Pavel Reichl <preichl@redhat.com>
commit 0f98b4ece18da9d8287bb4cc4e8f78b8760ea0d0 upstream.
Rename mp variable to parsisng_mp so it is easy to distinguish
between current mount point handle and handle for mount point
which mount options are being parsed.
Suggested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_super.c | 102 ++++++++++++++++++++++++++---------------------------
1 file changed, 51 insertions(+), 51 deletions(-)
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1165,7 +1165,7 @@ xfs_fc_parse_param(
struct fs_context *fc,
struct fs_parameter *param)
{
- struct xfs_mount *mp = fc->s_fs_info;
+ struct xfs_mount *parsing_mp = fc->s_fs_info;
struct fs_parse_result result;
int size = 0;
int opt;
@@ -1176,142 +1176,142 @@ xfs_fc_parse_param(
switch (opt) {
case Opt_logbufs:
- mp->m_logbufs = result.uint_32;
+ parsing_mp->m_logbufs = result.uint_32;
return 0;
case Opt_logbsize:
- if (suffix_kstrtoint(param->string, 10, &mp->m_logbsize))
+ if (suffix_kstrtoint(param->string, 10, &parsing_mp->m_logbsize))
return -EINVAL;
return 0;
case Opt_logdev:
- kfree(mp->m_logname);
- mp->m_logname = kstrdup(param->string, GFP_KERNEL);
- if (!mp->m_logname)
+ kfree(parsing_mp->m_logname);
+ parsing_mp->m_logname = kstrdup(param->string, GFP_KERNEL);
+ if (!parsing_mp->m_logname)
return -ENOMEM;
return 0;
case Opt_rtdev:
- kfree(mp->m_rtname);
- mp->m_rtname = kstrdup(param->string, GFP_KERNEL);
- if (!mp->m_rtname)
+ kfree(parsing_mp->m_rtname);
+ parsing_mp->m_rtname = kstrdup(param->string, GFP_KERNEL);
+ if (!parsing_mp->m_rtname)
return -ENOMEM;
return 0;
case Opt_allocsize:
if (suffix_kstrtoint(param->string, 10, &size))
return -EINVAL;
- mp->m_allocsize_log = ffs(size) - 1;
- mp->m_flags |= XFS_MOUNT_ALLOCSIZE;
+ parsing_mp->m_allocsize_log = ffs(size) - 1;
+ parsing_mp->m_flags |= XFS_MOUNT_ALLOCSIZE;
return 0;
case Opt_grpid:
case Opt_bsdgroups:
- mp->m_flags |= XFS_MOUNT_GRPID;
+ parsing_mp->m_flags |= XFS_MOUNT_GRPID;
return 0;
case Opt_nogrpid:
case Opt_sysvgroups:
- mp->m_flags &= ~XFS_MOUNT_GRPID;
+ parsing_mp->m_flags &= ~XFS_MOUNT_GRPID;
return 0;
case Opt_wsync:
- mp->m_flags |= XFS_MOUNT_WSYNC;
+ parsing_mp->m_flags |= XFS_MOUNT_WSYNC;
return 0;
case Opt_norecovery:
- mp->m_flags |= XFS_MOUNT_NORECOVERY;
+ parsing_mp->m_flags |= XFS_MOUNT_NORECOVERY;
return 0;
case Opt_noalign:
- mp->m_flags |= XFS_MOUNT_NOALIGN;
+ parsing_mp->m_flags |= XFS_MOUNT_NOALIGN;
return 0;
case Opt_swalloc:
- mp->m_flags |= XFS_MOUNT_SWALLOC;
+ parsing_mp->m_flags |= XFS_MOUNT_SWALLOC;
return 0;
case Opt_sunit:
- mp->m_dalign = result.uint_32;
+ parsing_mp->m_dalign = result.uint_32;
return 0;
case Opt_swidth:
- mp->m_swidth = result.uint_32;
+ parsing_mp->m_swidth = result.uint_32;
return 0;
case Opt_inode32:
- mp->m_flags |= XFS_MOUNT_SMALL_INUMS;
+ parsing_mp->m_flags |= XFS_MOUNT_SMALL_INUMS;
return 0;
case Opt_inode64:
- mp->m_flags &= ~XFS_MOUNT_SMALL_INUMS;
+ parsing_mp->m_flags &= ~XFS_MOUNT_SMALL_INUMS;
return 0;
case Opt_nouuid:
- mp->m_flags |= XFS_MOUNT_NOUUID;
+ parsing_mp->m_flags |= XFS_MOUNT_NOUUID;
return 0;
case Opt_largeio:
- mp->m_flags |= XFS_MOUNT_LARGEIO;
+ parsing_mp->m_flags |= XFS_MOUNT_LARGEIO;
return 0;
case Opt_nolargeio:
- mp->m_flags &= ~XFS_MOUNT_LARGEIO;
+ parsing_mp->m_flags &= ~XFS_MOUNT_LARGEIO;
return 0;
case Opt_filestreams:
- mp->m_flags |= XFS_MOUNT_FILESTREAMS;
+ parsing_mp->m_flags |= XFS_MOUNT_FILESTREAMS;
return 0;
case Opt_noquota:
- mp->m_qflags &= ~XFS_ALL_QUOTA_ACCT;
- mp->m_qflags &= ~XFS_ALL_QUOTA_ENFD;
- mp->m_qflags &= ~XFS_ALL_QUOTA_ACTIVE;
+ parsing_mp->m_qflags &= ~XFS_ALL_QUOTA_ACCT;
+ parsing_mp->m_qflags &= ~XFS_ALL_QUOTA_ENFD;
+ parsing_mp->m_qflags &= ~XFS_ALL_QUOTA_ACTIVE;
return 0;
case Opt_quota:
case Opt_uquota:
case Opt_usrquota:
- mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE |
+ parsing_mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE |
XFS_UQUOTA_ENFD);
return 0;
case Opt_qnoenforce:
case Opt_uqnoenforce:
- mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
- mp->m_qflags &= ~XFS_UQUOTA_ENFD;
+ parsing_mp->m_qflags |= (XFS_UQUOTA_ACCT | XFS_UQUOTA_ACTIVE);
+ parsing_mp->m_qflags &= ~XFS_UQUOTA_ENFD;
return 0;
case Opt_pquota:
case Opt_prjquota:
- mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE |
+ parsing_mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE |
XFS_PQUOTA_ENFD);
return 0;
case Opt_pqnoenforce:
- mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
- mp->m_qflags &= ~XFS_PQUOTA_ENFD;
+ parsing_mp->m_qflags |= (XFS_PQUOTA_ACCT | XFS_PQUOTA_ACTIVE);
+ parsing_mp->m_qflags &= ~XFS_PQUOTA_ENFD;
return 0;
case Opt_gquota:
case Opt_grpquota:
- mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE |
+ parsing_mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE |
XFS_GQUOTA_ENFD);
return 0;
case Opt_gqnoenforce:
- mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
- mp->m_qflags &= ~XFS_GQUOTA_ENFD;
+ parsing_mp->m_qflags |= (XFS_GQUOTA_ACCT | XFS_GQUOTA_ACTIVE);
+ parsing_mp->m_qflags &= ~XFS_GQUOTA_ENFD;
return 0;
case Opt_discard:
- mp->m_flags |= XFS_MOUNT_DISCARD;
+ parsing_mp->m_flags |= XFS_MOUNT_DISCARD;
return 0;
case Opt_nodiscard:
- mp->m_flags &= ~XFS_MOUNT_DISCARD;
+ parsing_mp->m_flags &= ~XFS_MOUNT_DISCARD;
return 0;
#ifdef CONFIG_FS_DAX
case Opt_dax:
- xfs_mount_set_dax_mode(mp, XFS_DAX_ALWAYS);
+ xfs_mount_set_dax_mode(parsing_mp, XFS_DAX_ALWAYS);
return 0;
case Opt_dax_enum:
- xfs_mount_set_dax_mode(mp, result.uint_32);
+ xfs_mount_set_dax_mode(parsing_mp, result.uint_32);
return 0;
#endif
/* Following mount options will be removed in September 2025 */
case Opt_ikeep:
- xfs_warn(mp, "%s mount option is deprecated.", param->key);
- mp->m_flags |= XFS_MOUNT_IKEEP;
+ xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ parsing_mp->m_flags |= XFS_MOUNT_IKEEP;
return 0;
case Opt_noikeep:
- xfs_warn(mp, "%s mount option is deprecated.", param->key);
- mp->m_flags &= ~XFS_MOUNT_IKEEP;
+ xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ parsing_mp->m_flags &= ~XFS_MOUNT_IKEEP;
return 0;
case Opt_attr2:
- xfs_warn(mp, "%s mount option is deprecated.", param->key);
- mp->m_flags |= XFS_MOUNT_ATTR2;
+ xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ parsing_mp->m_flags |= XFS_MOUNT_ATTR2;
return 0;
case Opt_noattr2:
- xfs_warn(mp, "%s mount option is deprecated.", param->key);
- mp->m_flags &= ~XFS_MOUNT_ATTR2;
- mp->m_flags |= XFS_MOUNT_NOATTR2;
+ xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ parsing_mp->m_flags &= ~XFS_MOUNT_ATTR2;
+ parsing_mp->m_flags |= XFS_MOUNT_NOATTR2;
return 0;
default:
- xfs_warn(mp, "unknown mount option [%s].", param->key);
+ xfs_warn(parsing_mp, "unknown mount option [%s].", param->key);
return -EINVAL;
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 43/84] xfs: Skip repetitive warnings about mount options
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (41 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 42/84] xfs: rename variable mp to parsing_mp Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 44/84] xfs: ensure xfs_errortag_random_default matches XFS_ERRTAG_MAX Greg Kroah-Hartman
` (46 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Pavel Reichl, Darrick J. Wong,
Carlos Maiolino, Amir Goldstein, Eric Sandeen
From: Pavel Reichl <preichl@redhat.com>
commit 92cf7d36384b99d5a57bf4422904a3c16dc4527a upstream.
Skip the warnings about mount option being deprecated if we are
remounting and deprecated option state is not changing.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211605
Fix-suggested-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_super.c | 24 ++++++++++++++++++++----
1 file changed, 20 insertions(+), 4 deletions(-)
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1155,6 +1155,22 @@ suffix_kstrtoint(
return ret;
}
+static inline void
+xfs_fs_warn_deprecated(
+ struct fs_context *fc,
+ struct fs_parameter *param,
+ uint64_t flag,
+ bool value)
+{
+ /* Don't print the warning if reconfiguring and current mount point
+ * already had the flag set
+ */
+ if ((fc->purpose & FS_CONTEXT_FOR_RECONFIGURE) &&
+ !!(XFS_M(fc->root->d_sb)->m_flags & flag) == value)
+ return;
+ xfs_warn(fc->s_fs_info, "%s mount option is deprecated.", param->key);
+}
+
/*
* Set mount state from a mount option.
*
@@ -1294,19 +1310,19 @@ xfs_fc_parse_param(
#endif
/* Following mount options will be removed in September 2025 */
case Opt_ikeep:
- xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ xfs_fs_warn_deprecated(fc, param, XFS_MOUNT_IKEEP, true);
parsing_mp->m_flags |= XFS_MOUNT_IKEEP;
return 0;
case Opt_noikeep:
- xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ xfs_fs_warn_deprecated(fc, param, XFS_MOUNT_IKEEP, false);
parsing_mp->m_flags &= ~XFS_MOUNT_IKEEP;
return 0;
case Opt_attr2:
- xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ xfs_fs_warn_deprecated(fc, param, XFS_MOUNT_ATTR2, true);
parsing_mp->m_flags |= XFS_MOUNT_ATTR2;
return 0;
case Opt_noattr2:
- xfs_warn(parsing_mp, "%s mount option is deprecated.", param->key);
+ xfs_fs_warn_deprecated(fc, param, XFS_MOUNT_NOATTR2, true);
parsing_mp->m_flags &= ~XFS_MOUNT_ATTR2;
parsing_mp->m_flags |= XFS_MOUNT_NOATTR2;
return 0;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 44/84] xfs: ensure xfs_errortag_random_default matches XFS_ERRTAG_MAX
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (42 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 43/84] xfs: Skip repetitive warnings about mount options Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 45/84] xfs: fix xfs_trans slab cache name Greg Kroah-Hartman
` (45 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gao Xiang, Christoph Hellwig,
Darrick J. Wong, Amir Goldstein
From: Gao Xiang <hsiangkao@redhat.com>
commit b2c2974b8cdf1eb3ef90ff845eb27b19e2187b7e upstream.
Add the BUILD_BUG_ON to xfs_errortag_add() in order to make sure that
the length of xfs_errortag_random_default matches XFS_ERRTAG_MAX when
building.
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_error.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -293,6 +293,8 @@ xfs_errortag_add(
struct xfs_mount *mp,
unsigned int error_tag)
{
+ BUILD_BUG_ON(ARRAY_SIZE(xfs_errortag_random_default) != XFS_ERRTAG_MAX);
+
if (error_tag >= XFS_ERRTAG_MAX)
return -EINVAL;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 45/84] xfs: fix xfs_trans slab cache name
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (43 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 44/84] xfs: ensure xfs_errortag_random_default matches XFS_ERRTAG_MAX Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 46/84] xfs: update superblock counters correctly for !lazysbcount Greg Kroah-Hartman
` (44 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Anthony Iliopoulos, Darrick J. Wong,
Amir Goldstein
From: Anthony Iliopoulos <ailiop@suse.com>
commit 25dfa65f814951a33072bcbae795989d817858da upstream.
Removal of kmem_zone_init wrappers accidentally changed a slab cache
name from "xfs_trans" to "xf_trans". Fix this so that userspace
consumers of /proc/slabinfo and /sys/kernel/slab can find it again.
Fixes: b1231760e443 ("xfs: Remove slab init wrappers")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -1934,7 +1934,7 @@ xfs_init_zones(void)
if (!xfs_ifork_zone)
goto out_destroy_da_state_zone;
- xfs_trans_zone = kmem_cache_create("xf_trans",
+ xfs_trans_zone = kmem_cache_create("xfs_trans",
sizeof(struct xfs_trans),
0, 0, NULL);
if (!xfs_trans_zone)
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 46/84] xfs: update superblock counters correctly for !lazysbcount
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (44 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 45/84] xfs: fix xfs_trans slab cache name Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 47/84] xfs: fix xfs_reflink_unshare usage of filemap_write_and_wait_range Greg Kroah-Hartman
` (43 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dave Chinner, Zorro Lang, Gao Xiang,
Darrick J. Wong, Brian Foster, Amir Goldstein
From: Dave Chinner <dchinner@redhat.com>
commit 6543990a168acf366f4b6174d7bd46ba15a8a2a6 upstream.
Keep the mount superblock counters up to date for !lazysbcount
filesystems so that when we log the superblock they do not need
updating in any way because they are already correct.
It's found by what Zorro reported:
1. mkfs.xfs -f -l lazy-count=0 -m crc=0 $dev
2. mount $dev $mnt
3. fsstress -d $mnt -p 100 -n 1000 (maybe need more or less io load)
4. umount $mnt
5. xfs_repair -n $dev
and I've seen no problem with this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reported-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/libxfs/xfs_sb.c | 16 +++++++++++++---
fs/xfs/xfs_trans.c | 3 +++
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/fs/xfs/libxfs/xfs_sb.c
+++ b/fs/xfs/libxfs/xfs_sb.c
@@ -956,9 +956,19 @@ xfs_log_sb(
struct xfs_mount *mp = tp->t_mountp;
struct xfs_buf *bp = xfs_trans_getsb(tp);
- mp->m_sb.sb_icount = percpu_counter_sum(&mp->m_icount);
- mp->m_sb.sb_ifree = percpu_counter_sum(&mp->m_ifree);
- mp->m_sb.sb_fdblocks = percpu_counter_sum(&mp->m_fdblocks);
+ /*
+ * Lazy sb counters don't update the in-core superblock so do that now.
+ * If this is at unmount, the counters will be exactly correct, but at
+ * any other time they will only be ballpark correct because of
+ * reservations that have been taken out percpu counters. If we have an
+ * unclean shutdown, this will be corrected by log recovery rebuilding
+ * the counters from the AGF block counts.
+ */
+ if (xfs_sb_version_haslazysbcount(&mp->m_sb)) {
+ mp->m_sb.sb_icount = percpu_counter_sum(&mp->m_icount);
+ mp->m_sb.sb_ifree = percpu_counter_sum(&mp->m_ifree);
+ mp->m_sb.sb_fdblocks = percpu_counter_sum(&mp->m_fdblocks);
+ }
xfs_sb_to_disk(bp->b_addr, &mp->m_sb);
xfs_trans_buf_set_type(tp, bp, XFS_BLFT_SB_BUF);
--- a/fs/xfs/xfs_trans.c
+++ b/fs/xfs/xfs_trans.c
@@ -615,6 +615,9 @@ xfs_trans_unreserve_and_mod_sb(
/* apply remaining deltas */
spin_lock(&mp->m_sb_lock);
+ mp->m_sb.sb_fdblocks += tp->t_fdblocks_delta + tp->t_res_fdblocks_delta;
+ mp->m_sb.sb_icount += idelta;
+ mp->m_sb.sb_ifree += ifreedelta;
mp->m_sb.sb_frextents += rtxdelta;
mp->m_sb.sb_dblocks += tp->t_dblocks_delta;
mp->m_sb.sb_agcount += tp->t_agcount_delta;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 47/84] xfs: fix xfs_reflink_unshare usage of filemap_write_and_wait_range
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (45 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 46/84] xfs: update superblock counters correctly for !lazysbcount Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 48/84] tcp: add a missing nf_reset_ct() in 3WHS handling Greg Kroah-Hartman
` (42 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Darrick J. Wong, Chandan Babu R,
Brian Foster, Amir Goldstein
From: "Darrick J. Wong" <djwong@kernel.org>
commit d4f74e162d238ce00a640af5f0611c3f51dad70e upstream.
The final parameter of filemap_write_and_wait_range is the end of the
range to flush, not the length of the range to flush.
Fixes: 46afb0628b86 ("xfs: only flush the unshared range in xfs_reflink_unshare")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/xfs/xfs_reflink.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/xfs/xfs_reflink.c
+++ b/fs/xfs/xfs_reflink.c
@@ -1503,7 +1503,8 @@ xfs_reflink_unshare(
if (error)
goto out;
- error = filemap_write_and_wait_range(inode->i_mapping, offset, len);
+ error = filemap_write_and_wait_range(inode->i_mapping, offset,
+ offset + len - 1);
if (error)
goto out;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 48/84] tcp: add a missing nf_reset_ct() in 3WHS handling
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (46 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 47/84] xfs: fix xfs_reflink_unshare usage of filemap_write_and_wait_range Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 49/84] xen/gntdev: Avoid blocking in unmap_grant_pages() Greg Kroah-Hartman
` (41 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ilya Maximets, Eric Dumazet,
Florian Westphal, Pablo Neira Ayuso, Steffen Klassert,
Jakub Kicinski
From: Eric Dumazet <edumazet@google.com>
commit 6f0012e35160cd08a53e46e3b3bbf724b92dfe68 upstream.
When the third packet of 3WHS connection establishment
contains payload, it is added into socket receive queue
without the XFRM check and the drop of connection tracking
context.
This means that if the data is left unread in the socket
receive queue, conntrack module can not be unloaded.
As most applications usually reads the incoming data
immediately after accept(), bug has been hiding for
quite a long time.
Commit 68822bdf76f1 ("net: generalize skb freeing
deferral to per-cpu lists") exposed this bug because
even if the application reads this data, the skb
with nfct state could stay in a per-cpu cache for
an arbitrary time, if said cpu no longer process RX softirqs.
Many thanks to Ilya Maximets for reporting this issue,
and for testing various patches:
https://lore.kernel.org/netdev/20220619003919.394622-1-i.maximets@ovn.org/
Note that I also added a missing xfrm4_policy_check() call,
although this is probably not a big issue, as the SYN
packet should have been dropped earlier.
Fixes: b59c270104f0 ("[NETFILTER]: Keep conntrack reference until IPsec policy checks are done")
Reported-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Tested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://lore.kernel.org/r/20220623050436.1290307-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_ipv4.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1980,7 +1980,8 @@ process:
struct sock *nsk;
sk = req->rsk_listener;
- if (unlikely(tcp_v4_inbound_md5_hash(sk, skb, dif, sdif))) {
+ if (unlikely(!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb) ||
+ tcp_v4_inbound_md5_hash(sk, skb, dif, sdif))) {
sk_drops_add(sk, skb);
reqsk_put(req);
goto discard_it;
@@ -2019,6 +2020,7 @@ process:
}
goto discard_and_relse;
}
+ nf_reset_ct(skb);
if (nsk == sk) {
reqsk_put(req);
tcp_v4_restore_cb(skb);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 49/84] xen/gntdev: Avoid blocking in unmap_grant_pages()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (47 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 48/84] tcp: add a missing nf_reset_ct() in 3WHS handling Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 50/84] drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c Greg Kroah-Hartman
` (40 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Demi Marie Obenour, Juergen Gross
From: Demi Marie Obenour <demi@invisiblethingslab.com>
commit dbe97cff7dd9f0f75c524afdd55ad46be3d15295 upstream.
unmap_grant_pages() currently waits for the pages to no longer be used.
In https://github.com/QubesOS/qubes-issues/issues/7481, this lead to a
deadlock against i915: i915 was waiting for gntdev's MMU notifier to
finish, while gntdev was waiting for i915 to free its pages. I also
believe this is responsible for various deadlocks I have experienced in
the past.
Avoid these problems by making unmap_grant_pages async. This requires
making it return void, as any errors will not be available when the
function returns. Fortunately, the only use of the return value is a
WARN_ON(), which can be replaced by a WARN_ON when the error is
detected. Additionally, a failed call will not prevent further calls
from being made, but this is harmless.
Because unmap_grant_pages is now async, the grant handle will be sent to
INVALID_GRANT_HANDLE too late to prevent multiple unmaps of the same
handle. Instead, a separate bool array is allocated for this purpose.
This wastes memory, but stuffing this information in padding bytes is
too fragile. Furthermore, it is necessary to grab a reference to the
map before making the asynchronous call, and release the reference when
the call returns.
It is also necessary to guard against reentrancy in gntdev_map_put(),
and to handle the case where userspace tries to map a mapping whose
contents have not all been freed yet.
Fixes: 745282256c75 ("xen/gntdev: safely unmap grants in case they are still in use")
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220622022726.2538-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/xen/gntdev-common.h | 7 ++
drivers/xen/gntdev.c | 140 +++++++++++++++++++++++++++++++-------------
2 files changed, 106 insertions(+), 41 deletions(-)
--- a/drivers/xen/gntdev-common.h
+++ b/drivers/xen/gntdev-common.h
@@ -16,6 +16,7 @@
#include <linux/mmu_notifier.h>
#include <linux/types.h>
#include <xen/interface/event_channel.h>
+#include <xen/grant_table.h>
struct gntdev_dmabuf_priv;
@@ -56,6 +57,7 @@ struct gntdev_grant_map {
struct gnttab_unmap_grant_ref *unmap_ops;
struct gnttab_map_grant_ref *kmap_ops;
struct gnttab_unmap_grant_ref *kunmap_ops;
+ bool *being_removed;
struct page **pages;
unsigned long pages_vm_start;
@@ -73,6 +75,11 @@ struct gntdev_grant_map {
/* Needed to avoid allocation in gnttab_dma_free_pages(). */
xen_pfn_t *frames;
#endif
+
+ /* Number of live grants */
+ atomic_t live_grants;
+ /* Needed to avoid allocation in __unmap_grant_pages */
+ struct gntab_unmap_queue_data unmap_data;
};
struct gntdev_grant_map *gntdev_alloc_map(struct gntdev_priv *priv, int count,
--- a/drivers/xen/gntdev.c
+++ b/drivers/xen/gntdev.c
@@ -35,6 +35,7 @@
#include <linux/slab.h>
#include <linux/highmem.h>
#include <linux/refcount.h>
+#include <linux/workqueue.h>
#include <xen/xen.h>
#include <xen/grant_table.h>
@@ -60,10 +61,11 @@ module_param(limit, uint, 0644);
MODULE_PARM_DESC(limit,
"Maximum number of grants that may be mapped by one mapping request");
+/* True in PV mode, false otherwise */
static int use_ptemod;
-static int unmap_grant_pages(struct gntdev_grant_map *map,
- int offset, int pages);
+static void unmap_grant_pages(struct gntdev_grant_map *map,
+ int offset, int pages);
static struct miscdevice gntdev_miscdev;
@@ -120,6 +122,7 @@ static void gntdev_free_map(struct gntde
kvfree(map->unmap_ops);
kvfree(map->kmap_ops);
kvfree(map->kunmap_ops);
+ kvfree(map->being_removed);
kfree(map);
}
@@ -140,12 +143,15 @@ struct gntdev_grant_map *gntdev_alloc_ma
add->kunmap_ops = kvcalloc(count,
sizeof(add->kunmap_ops[0]), GFP_KERNEL);
add->pages = kvcalloc(count, sizeof(add->pages[0]), GFP_KERNEL);
+ add->being_removed =
+ kvcalloc(count, sizeof(add->being_removed[0]), GFP_KERNEL);
if (NULL == add->grants ||
NULL == add->map_ops ||
NULL == add->unmap_ops ||
NULL == add->kmap_ops ||
NULL == add->kunmap_ops ||
- NULL == add->pages)
+ NULL == add->pages ||
+ NULL == add->being_removed)
goto err;
#ifdef CONFIG_XEN_GRANT_DMA_ALLOC
@@ -240,9 +246,36 @@ void gntdev_put_map(struct gntdev_priv *
if (!refcount_dec_and_test(&map->users))
return;
- if (map->pages && !use_ptemod)
+ if (map->pages && !use_ptemod) {
+ /*
+ * Increment the reference count. This ensures that the
+ * subsequent call to unmap_grant_pages() will not wind up
+ * re-entering itself. It *can* wind up calling
+ * gntdev_put_map() recursively, but such calls will be with a
+ * reference count greater than 1, so they will return before
+ * this code is reached. The recursion depth is thus limited to
+ * 1. Do NOT use refcount_inc() here, as it will detect that
+ * the reference count is zero and WARN().
+ */
+ refcount_set(&map->users, 1);
+
+ /*
+ * Unmap the grants. This may or may not be asynchronous, so it
+ * is possible that the reference count is 1 on return, but it
+ * could also be greater than 1.
+ */
unmap_grant_pages(map, 0, map->count);
+ /* Check if the memory now needs to be freed */
+ if (!refcount_dec_and_test(&map->users))
+ return;
+
+ /*
+ * All pages have been returned to the hypervisor, so free the
+ * map.
+ */
+ }
+
if (map->notify.flags & UNMAP_NOTIFY_SEND_EVENT) {
notify_remote_via_evtchn(map->notify.event);
evtchn_put(map->notify.event);
@@ -288,6 +321,7 @@ static int set_grant_ptes_as_special(pte
int gntdev_map_grant_pages(struct gntdev_grant_map *map)
{
+ size_t alloced = 0;
int i, err = 0;
if (!use_ptemod) {
@@ -336,87 +370,109 @@ int gntdev_map_grant_pages(struct gntdev
map->pages, map->count);
for (i = 0; i < map->count; i++) {
- if (map->map_ops[i].status == GNTST_okay)
+ if (map->map_ops[i].status == GNTST_okay) {
map->unmap_ops[i].handle = map->map_ops[i].handle;
- else if (!err)
+ if (!use_ptemod)
+ alloced++;
+ } else if (!err)
err = -EINVAL;
if (map->flags & GNTMAP_device_map)
map->unmap_ops[i].dev_bus_addr = map->map_ops[i].dev_bus_addr;
if (use_ptemod) {
- if (map->kmap_ops[i].status == GNTST_okay)
+ if (map->kmap_ops[i].status == GNTST_okay) {
+ if (map->map_ops[i].status == GNTST_okay)
+ alloced++;
map->kunmap_ops[i].handle = map->kmap_ops[i].handle;
- else if (!err)
+ } else if (!err)
err = -EINVAL;
}
}
+ atomic_add(alloced, &map->live_grants);
return err;
}
-static int __unmap_grant_pages(struct gntdev_grant_map *map, int offset,
- int pages)
+static void __unmap_grant_pages_done(int result,
+ struct gntab_unmap_queue_data *data)
{
- int i, err = 0;
- struct gntab_unmap_queue_data unmap_data;
+ unsigned int i;
+ struct gntdev_grant_map *map = data->data;
+ unsigned int offset = data->unmap_ops - map->unmap_ops;
+
+ for (i = 0; i < data->count; i++) {
+ WARN_ON(map->unmap_ops[offset+i].status);
+ pr_debug("unmap handle=%d st=%d\n",
+ map->unmap_ops[offset+i].handle,
+ map->unmap_ops[offset+i].status);
+ map->unmap_ops[offset+i].handle = -1;
+ }
+ /*
+ * Decrease the live-grant counter. This must happen after the loop to
+ * prevent premature reuse of the grants by gnttab_mmap().
+ */
+ atomic_sub(data->count, &map->live_grants);
+ /* Release reference taken by __unmap_grant_pages */
+ gntdev_put_map(NULL, map);
+}
+
+static void __unmap_grant_pages(struct gntdev_grant_map *map, int offset,
+ int pages)
+{
if (map->notify.flags & UNMAP_NOTIFY_CLEAR_BYTE) {
int pgno = (map->notify.addr >> PAGE_SHIFT);
+
if (pgno >= offset && pgno < offset + pages) {
/* No need for kmap, pages are in lowmem */
uint8_t *tmp = pfn_to_kaddr(page_to_pfn(map->pages[pgno]));
+
tmp[map->notify.addr & (PAGE_SIZE-1)] = 0;
map->notify.flags &= ~UNMAP_NOTIFY_CLEAR_BYTE;
}
}
- unmap_data.unmap_ops = map->unmap_ops + offset;
- unmap_data.kunmap_ops = use_ptemod ? map->kunmap_ops + offset : NULL;
- unmap_data.pages = map->pages + offset;
- unmap_data.count = pages;
+ map->unmap_data.unmap_ops = map->unmap_ops + offset;
+ map->unmap_data.kunmap_ops = use_ptemod ? map->kunmap_ops + offset : NULL;
+ map->unmap_data.pages = map->pages + offset;
+ map->unmap_data.count = pages;
+ map->unmap_data.done = __unmap_grant_pages_done;
+ map->unmap_data.data = map;
+ refcount_inc(&map->users); /* to keep map alive during async call below */
- err = gnttab_unmap_refs_sync(&unmap_data);
- if (err)
- return err;
-
- for (i = 0; i < pages; i++) {
- if (map->unmap_ops[offset+i].status)
- err = -EINVAL;
- pr_debug("unmap handle=%d st=%d\n",
- map->unmap_ops[offset+i].handle,
- map->unmap_ops[offset+i].status);
- map->unmap_ops[offset+i].handle = -1;
- }
- return err;
+ gnttab_unmap_refs_async(&map->unmap_data);
}
-static int unmap_grant_pages(struct gntdev_grant_map *map, int offset,
- int pages)
+static void unmap_grant_pages(struct gntdev_grant_map *map, int offset,
+ int pages)
{
- int range, err = 0;
+ int range;
+
+ if (atomic_read(&map->live_grants) == 0)
+ return; /* Nothing to do */
pr_debug("unmap %d+%d [%d+%d]\n", map->index, map->count, offset, pages);
/* It is possible the requested range will have a "hole" where we
* already unmapped some of the grants. Only unmap valid ranges.
*/
- while (pages && !err) {
- while (pages && map->unmap_ops[offset].handle == -1) {
+ while (pages) {
+ while (pages && map->being_removed[offset]) {
offset++;
pages--;
}
range = 0;
while (range < pages) {
- if (map->unmap_ops[offset+range].handle == -1)
+ if (map->being_removed[offset + range])
break;
+ map->being_removed[offset + range] = true;
range++;
}
- err = __unmap_grant_pages(map, offset, range);
+ if (range)
+ __unmap_grant_pages(map, offset, range);
offset += range;
pages -= range;
}
-
- return err;
}
/* ------------------------------------------------------------------ */
@@ -468,7 +524,6 @@ static bool gntdev_invalidate(struct mmu
struct gntdev_grant_map *map =
container_of(mn, struct gntdev_grant_map, notifier);
unsigned long mstart, mend;
- int err;
if (!mmu_notifier_range_blockable(range))
return false;
@@ -489,10 +544,9 @@ static bool gntdev_invalidate(struct mmu
map->index, map->count,
map->vma->vm_start, map->vma->vm_end,
range->start, range->end, mstart, mend);
- err = unmap_grant_pages(map,
+ unmap_grant_pages(map,
(mstart - map->vma->vm_start) >> PAGE_SHIFT,
(mend - mstart) >> PAGE_SHIFT);
- WARN_ON(err);
return true;
}
@@ -980,6 +1034,10 @@ static int gntdev_mmap(struct file *flip
goto unlock_out;
if (use_ptemod && map->vma)
goto unlock_out;
+ if (atomic_read(&map->live_grants)) {
+ err = -EAGAIN;
+ goto unlock_out;
+ }
refcount_inc(&map->users);
vma->vm_ops = &gntdev_vmops;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 50/84] drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (48 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 49/84] xen/gntdev: Avoid blocking in unmap_grant_pages() Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case Greg Kroah-Hartman
` (39 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Liang He, Viresh Kumar, Sasha Levin
From: Liang He <windhl@126.com>
[ Upstream commit 4ff5a9b6d95f3524bf6d27147df497eb21968300 ]
In qoriq_cpufreq_probe(), of_find_matching_node() will return a
node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.
Fixes: 157f527639da ("cpufreq: qoriq: convert to a platform driver")
[ Viresh: Fixed Author's name in commit log ]
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/cpufreq/qoriq-cpufreq.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 6b6b20da2bcf..573b417e1483 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -275,6 +275,7 @@ static int qoriq_cpufreq_probe(struct platform_device *pdev)
np = of_find_matching_node(NULL, qoriq_cpufreq_blacklist);
if (np) {
+ of_node_put(np);
dev_info(&pdev->dev, "Disabling due to erratum A-008083");
return -ENODEV;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (49 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 50/84] drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 15:59 ` Matthieu Baerts
2022-07-05 11:58 ` [PATCH 5.10 52/84] selftests: mptcp: add link failure " Greg Kroah-Hartman
` (38 subsequent siblings)
89 siblings, 1 reply; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Paolo Abeni,
Geliang Tang, Mat Martineau, Jakub Kicinski, Sasha Levin
From: Geliang Tang <geliangtang@gmail.com>
[ Upstream commit 8d014eaa9254a9b8e0841df40dd36782b451579a ]
This patch added the test case for retransmitting ADD_ADDR when timeout
occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
echo packets.
Here we need to slow down the transfer process of all data to let the
ADD_ADDR suboptions can be retransmitted three times. So we added a new
parameter "speed" for do_transfer, it can be set with fast or slow.
We also added three new optional parameters for run_tests, and dropped
run_remove_tests function.
Since we added the netfilter rules in this test case, we need to update
the "config" file.
Suggested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/mptcp/config | 10 ++
.../testing/selftests/net/mptcp/mptcp_join.sh | 94 ++++++++++++++-----
2 files changed, 80 insertions(+), 24 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/config b/tools/testing/selftests/net/mptcp/config
index 741a1c4f4ae8..0faaccd21447 100644
--- a/tools/testing/selftests/net/mptcp/config
+++ b/tools/testing/selftests/net/mptcp/config
@@ -5,3 +5,13 @@ CONFIG_INET_DIAG=m
CONFIG_INET_MPTCP_DIAG=m
CONFIG_VETH=y
CONFIG_NET_SCH_NETEM=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NF_TABLES=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NF_TABLES_IPV6=y
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 08f53d86dedc..0d93b243695f 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -13,6 +13,24 @@ capture=0
TEST_COUNT=0
+# generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
+# (ip6 && (ip6[74] & 0xf0) == 0x30)'"
+CBPF_MPTCP_SUBOPTION_ADD_ADDR="14,
+ 48 0 0 0,
+ 84 0 0 240,
+ 21 0 3 64,
+ 48 0 0 54,
+ 84 0 0 240,
+ 21 6 7 48,
+ 48 0 0 0,
+ 84 0 0 240,
+ 21 0 4 96,
+ 48 0 0 74,
+ 84 0 0 240,
+ 21 0 1 48,
+ 6 0 0 65535,
+ 6 0 0 0"
+
init()
{
capout=$(mktemp)
@@ -82,6 +100,26 @@ reset_with_cookies()
done
}
+reset_with_add_addr_timeout()
+{
+ local ip="${1:-4}"
+ local tables
+
+ tables="iptables"
+ if [ $ip -eq 6 ]; then
+ tables="ip6tables"
+ fi
+
+ reset
+
+ ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
+ ip netns exec $ns2 $tables -A OUTPUT -p tcp \
+ -m tcp --tcp-option 30 \
+ -m bpf --bytecode \
+ "$CBPF_MPTCP_SUBOPTION_ADD_ADDR" \
+ -j DROP
+}
+
for arg in "$@"; do
if [ "$arg" = "-c" ]; then
capture=1
@@ -94,6 +132,17 @@ if [ $? -ne 0 ];then
exit $ksft_skip
fi
+iptables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run all tests without iptables tool"
+ exit $ksft_skip
+fi
+
+ip6tables -V > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run all tests without ip6tables tool"
+ exit $ksft_skip
+fi
check_transfer()
{
@@ -135,6 +184,7 @@ do_transfer()
connect_addr="$5"
rm_nr_ns1="$6"
rm_nr_ns2="$7"
+ speed="$8"
port=$((10000+$TEST_COUNT))
TEST_COUNT=$((TEST_COUNT+1))
@@ -159,7 +209,7 @@ do_transfer()
sleep 1
fi
- if [[ $rm_nr_ns1 -eq 0 && $rm_nr_ns2 -eq 0 ]]; then
+ if [ $speed = "fast" ]; then
mptcp_connect="./mptcp_connect -j"
else
mptcp_connect="./mptcp_connect -r"
@@ -250,26 +300,13 @@ run_tests()
listener_ns="$1"
connector_ns="$2"
connect_addr="$3"
+ rm_nr_ns1="${4:-0}"
+ rm_nr_ns2="${5:-0}"
+ speed="${6:-fast}"
lret=0
- do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} 0 0
- lret=$?
- if [ $lret -ne 0 ]; then
- ret=$lret
- return
- fi
-}
-
-run_remove_tests()
-{
- listener_ns="$1"
- connector_ns="$2"
- connect_addr="$3"
- rm_nr_ns1="$4"
- rm_nr_ns2="$5"
- lret=0
-
- do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${rm_nr_ns1} ${rm_nr_ns2}
+ do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \
+ ${rm_nr_ns1} ${rm_nr_ns2} ${speed}
lret=$?
if [ $lret -ne 0 ]; then
ret=$lret
@@ -491,12 +528,21 @@ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows and signal" 3 3 3
chk_add_nr 1 1
+# add_addr timeout
+reset_with_add_addr_timeout
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+run_tests $ns1 $ns2 10.0.1.1 0 0 slow
+chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
+chk_add_nr 4 0
+
# single subflow, remove
reset
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
ip netns exec $ns2 ./pm_nl_ctl limits 0 1
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_remove_tests $ns1 $ns2 10.0.1.1 0 1
+run_tests $ns1 $ns2 10.0.1.1 0 1 slow
chk_join_nr "remove single subflow" 1 1 1
chk_rm_nr 1 1
@@ -506,7 +552,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
ip netns exec $ns2 ./pm_nl_ctl limits 0 2
ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_remove_tests $ns1 $ns2 10.0.1.1 0 2
+run_tests $ns1 $ns2 10.0.1.1 0 2 slow
chk_join_nr "remove multiple subflows" 2 2 2
chk_rm_nr 2 2
@@ -515,7 +561,7 @@ reset
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_remove_tests $ns1 $ns2 10.0.1.1 1 0
+run_tests $ns1 $ns2 10.0.1.1 1 0 slow
chk_join_nr "remove single address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 0 0
@@ -526,7 +572,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 2
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_remove_tests $ns1 $ns2 10.0.1.1 1 1
+run_tests $ns1 $ns2 10.0.1.1 1 1 slow
chk_join_nr "remove subflow and signal" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -538,7 +584,7 @@ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 3
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_remove_tests $ns1 $ns2 10.0.1.1 1 2
+run_tests $ns1 $ns2 10.0.1.1 1 2 slow
chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case
2022-07-05 11:58 ` [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case Greg Kroah-Hartman
@ 2022-07-05 15:59 ` Matthieu Baerts
2022-07-05 16:31 ` Greg Kroah-Hartman
0 siblings, 1 reply; 95+ messages in thread
From: Matthieu Baerts @ 2022-07-05 15:59 UTC (permalink / raw)
To: Greg Kroah-Hartman, Sasha Levin
Cc: stable, Paolo Abeni, Geliang Tang, Mat Martineau, Jakub Kicinski,
linux-kernel, MPTCP Upstream
Hi Greg, Sasha,
(+ MPTCP upstream ML)
First, thank you again for maintaining the stable branches!
On 05/07/2022 13:58, Greg Kroah-Hartman wrote:
> From: Geliang Tang <geliangtang@gmail.com>
>
> [ Upstream commit 8d014eaa9254a9b8e0841df40dd36782b451579a ]
>
> This patch added the test case for retransmitting ADD_ADDR when timeout
> occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
> echo packets.
TL;DR: Could it be possible to drop all selftests MPTCP patches from
v5.10 queue please?
I was initially reacting on this patch because it looks like it depends on:
93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
and indirectly to:
9ce7deff92e8 ("docs: networking: mptcp: Add MPTCP sysctl entries")
to have "net.mptcp.add_addr_timeout" sysctl knob needed for this new
selftest.
But then I tried to understand why this current patch ("selftests:
mptcp: add ADD_ADDR timeout test case") has been selected for 5.10. I
guess it was to ease the backport of another one, right?
Looking at the 'series' file in 5.10 queue, it seems the new
"selftests-mptcp-more-stable-diag-tests" patch requires 5 other patches:
-> selftests-mptcp-more-stable-diag-tests.patch
-> selftests-mptcp-fix-diag-instability.patch
-> selftests-mptcp-launch-mptcp_connect-with-timeout.patch
-> selftests-mptcp-add-add_addr-ipv6-test-cases.patch
-> selftests-mptcp-add-link-failure-test-case.patch
-> selftests-mptcp-add-add_addr-timeout-test-case.patch
When looking at these patches in more detail, it looks like "selftests:
mptcp: add ADD_ADDR IPv6 test cases" depends on a new feature only
available from v5.11: ADD_ADDR for IPv6.
Could it be possible to drop all these patches from v5.10 then please?
The two recent fixes for the "diag" selftest mainly helps on slow / busy
CI. I think it is not worth backporting them to v5.10.
(Note that if we want "selftests: mptcp: fix diag instability" patch, we
also need 2e580a63b5c2 ("selftests: mptcp: add cfg_do_w for cfg_remove")
and the top part of 8da6229b9524 ("selftests: mptcp: timeout testcases
for multi addresses"): the list starts to be long.)
One last thing: it looks like when Sasha adds patches to a stable queue,
a notification is sent to less people than when Greg adds patches. For
example here, I have not been notified for this patch when added to the
queue while I was one of the reviewers. I already got notifications from
Greg when I was a reviewer on other patches.
Is it normal? Do you only cc people who signed off on the patch?
It looks like you don't cc maintainers from the MAINTAINERS file but
that's probably on purpose. I didn't get cc for all MPTCP patches of the
series here but I guess I can always subscribe to 'stable' ML for that.
Cheers,
Matt
--
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case
2022-07-05 15:59 ` Matthieu Baerts
@ 2022-07-05 16:31 ` Greg Kroah-Hartman
2022-07-05 18:54 ` Mat Martineau
2022-07-06 8:51 ` Matthieu Baerts
0 siblings, 2 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 16:31 UTC (permalink / raw)
To: Matthieu Baerts
Cc: Sasha Levin, stable, Paolo Abeni, Geliang Tang, Mat Martineau,
Jakub Kicinski, linux-kernel, MPTCP Upstream
On Tue, Jul 05, 2022 at 05:59:22PM +0200, Matthieu Baerts wrote:
> Hi Greg, Sasha,
>
> (+ MPTCP upstream ML)
>
> First, thank you again for maintaining the stable branches!
>
> On 05/07/2022 13:58, Greg Kroah-Hartman wrote:
> > From: Geliang Tang <geliangtang@gmail.com>
> >
> > [ Upstream commit 8d014eaa9254a9b8e0841df40dd36782b451579a ]
> >
> > This patch added the test case for retransmitting ADD_ADDR when timeout
> > occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
> > echo packets.
> TL;DR: Could it be possible to drop all selftests MPTCP patches from
> v5.10 queue please?
>
>
> I was initially reacting on this patch because it looks like it depends on:
>
> 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
>
> and indirectly to:
>
> 9ce7deff92e8 ("docs: networking: mptcp: Add MPTCP sysctl entries")
>
> to have "net.mptcp.add_addr_timeout" sysctl knob needed for this new
> selftest.
>
> But then I tried to understand why this current patch ("selftests:
> mptcp: add ADD_ADDR timeout test case") has been selected for 5.10. I
> guess it was to ease the backport of another one, right?
> Looking at the 'series' file in 5.10 queue, it seems the new
> "selftests-mptcp-more-stable-diag-tests" patch requires 5 other patches:
>
> -> selftests-mptcp-more-stable-diag-tests.patch
> -> selftests-mptcp-fix-diag-instability.patch
> -> selftests-mptcp-launch-mptcp_connect-with-timeout.patch
> -> selftests-mptcp-add-add_addr-ipv6-test-cases.patch
> -> selftests-mptcp-add-link-failure-test-case.patch
> -> selftests-mptcp-add-add_addr-timeout-test-case.patch
>
>
> When looking at these patches in more detail, it looks like "selftests:
> mptcp: add ADD_ADDR IPv6 test cases" depends on a new feature only
> available from v5.11: ADD_ADDR for IPv6.
>
>
> Could it be possible to drop all these patches from v5.10 then please?
Sure, but leave them in for 5.15.y and 5.18.y?
> The two recent fixes for the "diag" selftest mainly helps on slow / busy
> CI. I think it is not worth backporting them to v5.10.
>
>
> (Note that if we want "selftests: mptcp: fix diag instability" patch, we
> also need 2e580a63b5c2 ("selftests: mptcp: add cfg_do_w for cfg_remove")
> and the top part of 8da6229b9524 ("selftests: mptcp: timeout testcases
> for multi addresses"): the list starts to be long.)
>
>
> One last thing: it looks like when Sasha adds patches to a stable queue,
> a notification is sent to less people than when Greg adds patches. For
> example here, I have not been notified for this patch when added to the
> queue while I was one of the reviewers. I already got notifications from
> Greg when I was a reviewer on other patches.
> Is it normal? Do you only cc people who signed off on the patch?
I cc: everyone on the commit, Sasha should also do that but sometimes
his script acts up.
> It looks like you don't cc maintainers from the MAINTAINERS file but
> that's probably on purpose. I didn't get cc for all MPTCP patches of the
> series here but I guess I can always subscribe to 'stable' ML for that.
No, we don't use the MAINTAINERS file, that would just be too noisy as
ideally who ever the MAINTAINER was, they already saw this as the commit
is already in Linus's tree.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case
2022-07-05 16:31 ` Greg Kroah-Hartman
@ 2022-07-05 18:54 ` Mat Martineau
2022-07-06 8:51 ` Matthieu Baerts
1 sibling, 0 replies; 95+ messages in thread
From: Mat Martineau @ 2022-07-05 18:54 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Matthieu Baerts, Sasha Levin, stable, Paolo Abeni, Geliang Tang,
Jakub Kicinski, linux-kernel, MPTCP Upstream
On Tue, 5 Jul 2022, Greg Kroah-Hartman wrote:
> On Tue, Jul 05, 2022 at 05:59:22PM +0200, Matthieu Baerts wrote:
>> Hi Greg, Sasha,
>>
>> (+ MPTCP upstream ML)
>>
>> First, thank you again for maintaining the stable branches!
>>
>> On 05/07/2022 13:58, Greg Kroah-Hartman wrote:
>>> From: Geliang Tang <geliangtang@gmail.com>
>>>
>>> [ Upstream commit 8d014eaa9254a9b8e0841df40dd36782b451579a ]
>>>
>>> This patch added the test case for retransmitting ADD_ADDR when timeout
>>> occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
>>> echo packets.
>> TL;DR: Could it be possible to drop all selftests MPTCP patches from
>> v5.10 queue please?
>>
>>
>> I was initially reacting on this patch because it looks like it depends on:
>>
>> 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
>>
>> and indirectly to:
>>
>> 9ce7deff92e8 ("docs: networking: mptcp: Add MPTCP sysctl entries")
>>
>> to have "net.mptcp.add_addr_timeout" sysctl knob needed for this new
>> selftest.
>>
>> But then I tried to understand why this current patch ("selftests:
>> mptcp: add ADD_ADDR timeout test case") has been selected for 5.10. I
>> guess it was to ease the backport of another one, right?
>> Looking at the 'series' file in 5.10 queue, it seems the new
>> "selftests-mptcp-more-stable-diag-tests" patch requires 5 other patches:
>>
>> -> selftests-mptcp-more-stable-diag-tests.patch
>> -> selftests-mptcp-fix-diag-instability.patch
>> -> selftests-mptcp-launch-mptcp_connect-with-timeout.patch
>> -> selftests-mptcp-add-add_addr-ipv6-test-cases.patch
>> -> selftests-mptcp-add-link-failure-test-case.patch
>> -> selftests-mptcp-add-add_addr-timeout-test-case.patch
>>
>>
>> When looking at these patches in more detail, it looks like "selftests:
>> mptcp: add ADD_ADDR IPv6 test cases" depends on a new feature only
>> available from v5.11: ADD_ADDR for IPv6.
>>
>>
>> Could it be possible to drop all these patches from v5.10 then please?
>
> Sure, but leave them in for 5.15.y and 5.18.y?
>
Hi Greg -
I'm the other MPTCP maintainer, jumping in here due to Matt's time zone.
Yes: leave selftests-mptcp-more-stable-diag-tests.patch in 5.15.y and
5.18.y
--
Mat Martineau
Intel
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case
2022-07-05 16:31 ` Greg Kroah-Hartman
2022-07-05 18:54 ` Mat Martineau
@ 2022-07-06 8:51 ` Matthieu Baerts
1 sibling, 0 replies; 95+ messages in thread
From: Matthieu Baerts @ 2022-07-06 8:51 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Sasha Levin, stable, Paolo Abeni, Geliang Tang, Mat Martineau,
Jakub Kicinski, linux-kernel, MPTCP Upstream
Hi Greg,
On 05/07/2022 18:31, Greg Kroah-Hartman wrote:
> On Tue, Jul 05, 2022 at 05:59:22PM +0200, Matthieu Baerts wrote:
>> Hi Greg, Sasha,
>>
>> (+ MPTCP upstream ML)
>>
>> First, thank you again for maintaining the stable branches!
>>
>> On 05/07/2022 13:58, Greg Kroah-Hartman wrote:
>>> From: Geliang Tang <geliangtang@gmail.com>
>>>
>>> [ Upstream commit 8d014eaa9254a9b8e0841df40dd36782b451579a ]
>>>
>>> This patch added the test case for retransmitting ADD_ADDR when timeout
>>> occurs. It set NS1's add_addr_timeout to 1 second, and drop NS2's ADD_ADDR
>>> echo packets.
>> TL;DR: Could it be possible to drop all selftests MPTCP patches from
>> v5.10 queue please?
>>
>>
>> I was initially reacting on this patch because it looks like it depends on:
>>
>> 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
>>
>> and indirectly to:
>>
>> 9ce7deff92e8 ("docs: networking: mptcp: Add MPTCP sysctl entries")
>>
>> to have "net.mptcp.add_addr_timeout" sysctl knob needed for this new
>> selftest.
>>
>> But then I tried to understand why this current patch ("selftests:
>> mptcp: add ADD_ADDR timeout test case") has been selected for 5.10. I
>> guess it was to ease the backport of another one, right?
>> Looking at the 'series' file in 5.10 queue, it seems the new
>> "selftests-mptcp-more-stable-diag-tests" patch requires 5 other patches:
>>
>> -> selftests-mptcp-more-stable-diag-tests.patch
>> -> selftests-mptcp-fix-diag-instability.patch
>> -> selftests-mptcp-launch-mptcp_connect-with-timeout.patch
>> -> selftests-mptcp-add-add_addr-ipv6-test-cases.patch
>> -> selftests-mptcp-add-link-failure-test-case.patch
>> -> selftests-mptcp-add-add_addr-timeout-test-case.patch
>>
>>
>> When looking at these patches in more detail, it looks like "selftests:
>> mptcp: add ADD_ADDR IPv6 test cases" depends on a new feature only
>> available from v5.11: ADD_ADDR for IPv6.
>>
>>
>> Could it be possible to drop all these patches from v5.10 then please?
>
> Sure, but leave them in for 5.15.y and 5.18.y?
(@Mat: Thank you for having replied to this part: yes, please leave them
there)
>> The two recent fixes for the "diag" selftest mainly helps on slow / busy
>> CI. I think it is not worth backporting them to v5.10.
>>
>>
>> (Note that if we want "selftests: mptcp: fix diag instability" patch, we
>> also need 2e580a63b5c2 ("selftests: mptcp: add cfg_do_w for cfg_remove")
>> and the top part of 8da6229b9524 ("selftests: mptcp: timeout testcases
>> for multi addresses"): the list starts to be long.)
>>
>>
>> One last thing: it looks like when Sasha adds patches to a stable queue,
>> a notification is sent to less people than when Greg adds patches. For
>> example here, I have not been notified for this patch when added to the
>> queue while I was one of the reviewers. I already got notifications from
>> Greg when I was a reviewer on other patches.
>> Is it normal? Do you only cc people who signed off on the patch?
>
> I cc: everyone on the commit, Sasha should also do that but sometimes
> his script acts up.
All good, thank you!
>> It looks like you don't cc maintainers from the MAINTAINERS file but
>> that's probably on purpose. I didn't get cc for all MPTCP patches of the
>> series here but I guess I can always subscribe to 'stable' ML for that.
>
> No, we don't use the MAINTAINERS file, that would just be too noisy as
> ideally who ever the MAINTAINER was, they already saw this as the commit
> is already in Linus's tree.
I understand, thank you for the explanation.
Cheers,
Matt
--
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net
^ permalink raw reply [flat|nested] 95+ messages in thread
* [PATCH 5.10 52/84] selftests: mptcp: add link failure test case
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (50 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 51/84] selftests: mptcp: add ADD_ADDR timeout test case Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 53/84] selftests: mptcp: add ADD_ADDR IPv6 test cases Greg Kroah-Hartman
` (37 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Geliang Tang, Florian Westphal,
Mat Martineau, Jakub Kicinski, Sasha Levin
From: Florian Westphal <fw@strlen.de>
[ Upstream commit 8b819a84d4b12c4a91cc9f91ad69ca09c3e0606d ]
Add a test case where a link fails with multiple subflows.
The expectation is that MPTCP will transmit any data that
could not be delivered via the failed link on another subflow.
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../testing/selftests/net/mptcp/mptcp_join.sh | 104 ++++++++++++++----
1 file changed, 82 insertions(+), 22 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 0d93b243695f..f841ed8186c1 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -5,6 +5,7 @@ ret=0
sin=""
sout=""
cin=""
+cinsent=""
cout=""
ksft_skip=4
timeout=30
@@ -81,7 +82,7 @@ cleanup_partial()
cleanup()
{
rm -f "$cin" "$cout"
- rm -f "$sin" "$sout"
+ rm -f "$sin" "$sout" "$cinsent"
cleanup_partial
}
@@ -144,6 +145,13 @@ if [ $? -ne 0 ];then
exit $ksft_skip
fi
+print_file_err()
+{
+ ls -l "$1" 1>&2
+ echo "Trailing bytes are: "
+ tail -c 27 "$1"
+}
+
check_transfer()
{
in=$1
@@ -155,6 +163,7 @@ check_transfer()
echo "[ FAIL ] $what does not match (in, out):"
print_file_err "$in"
print_file_err "$out"
+ ret=1
return 1
fi
@@ -175,6 +184,17 @@ do_ping()
fi
}
+link_failure()
+{
+ ns="$1"
+
+ l=$((RANDOM%4))
+ l=$((l+1))
+
+ veth="ns1eth$l"
+ ip -net "$ns" link set "$veth" down
+}
+
do_transfer()
{
listener_ns="$1"
@@ -182,9 +202,10 @@ do_transfer()
cl_proto="$3"
srv_proto="$4"
connect_addr="$5"
- rm_nr_ns1="$6"
- rm_nr_ns2="$7"
- speed="$8"
+ test_link_fail="$6"
+ rm_nr_ns1="$7"
+ rm_nr_ns2="$8"
+ speed="$9"
port=$((10000+$TEST_COUNT))
TEST_COUNT=$((TEST_COUNT+1))
@@ -220,7 +241,12 @@ do_transfer()
sleep 1
- ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" &
+ if [ "$test_link_fail" -eq 0 ];then
+ ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" &
+ else
+ ( cat "$cin" ; sleep 2; link_failure $listener_ns ; cat "$cin" ) | tee "$cinsent" | \
+ ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr > "$cout" &
+ fi
cpid=$!
if [ $rm_nr_ns1 -gt 0 ]; then
@@ -265,12 +291,17 @@ do_transfer()
ip netns exec ${connector_ns} ss -nita 1>&2 -o "dport = :$port"
cat "$capout"
+ ret=1
return 1
fi
check_transfer $sin $cout "file received by client"
retc=$?
- check_transfer $cin $sout "file received by server"
+ if [ "$test_link_fail" -eq 0 ];then
+ check_transfer $cin $sout "file received by server"
+ else
+ check_transfer $cinsent $sout "file received by server"
+ fi
rets=$?
if [ $retc -eq 0 ] && [ $rets -eq 0 ];then
@@ -286,13 +317,12 @@ make_file()
{
name=$1
who=$2
+ size=$3
- SIZE=1
-
- dd if=/dev/urandom of="$name" bs=1024 count=$SIZE 2> /dev/null
+ dd if=/dev/urandom of="$name" bs=1024 count=$size 2> /dev/null
echo -e "\nMPTCP_TEST_FILE_END_MARKER" >> "$name"
- echo "Created $name (size $SIZE KB) containing data sent by $who"
+ echo "Created $name (size $size KB) containing data sent by $who"
}
run_tests()
@@ -300,14 +330,32 @@ run_tests()
listener_ns="$1"
connector_ns="$2"
connect_addr="$3"
- rm_nr_ns1="${4:-0}"
- rm_nr_ns2="${5:-0}"
- speed="${6:-fast}"
+ test_linkfail="${4:-0}"
+ rm_nr_ns1="${5:-0}"
+ rm_nr_ns2="${6:-0}"
+ speed="${7:-fast}"
lret=0
+ oldin=""
+
+ if [ "$test_linkfail" -eq 1 ];then
+ size=$((RANDOM%1024))
+ size=$((size+1))
+ size=$((size*128))
+
+ oldin=$(mktemp)
+ cp "$cin" "$oldin"
+ make_file "$cin" "client" $size
+ fi
do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} \
- ${rm_nr_ns1} ${rm_nr_ns2} ${speed}
+ ${test_linkfail} ${rm_nr_ns1} ${rm_nr_ns2} ${speed}
lret=$?
+
+ if [ "$test_linkfail" -eq 1 ];then
+ cp "$oldin" "$cin"
+ rm -f "$oldin"
+ fi
+
if [ $lret -ne 0 ]; then
ret=$lret
return
@@ -440,10 +488,11 @@ chk_rm_nr()
sin=$(mktemp)
sout=$(mktemp)
cin=$(mktemp)
+cinsent=$(mktemp)
cout=$(mktemp)
init
-make_file "$cin" "client"
-make_file "$sin" "server"
+make_file "$cin" "client" 1
+make_file "$sin" "server" 1
trap cleanup EXIT
run_tests $ns1 $ns2 10.0.1.1
@@ -528,12 +577,23 @@ run_tests $ns1 $ns2 10.0.1.1
chk_join_nr "multiple subflows and signal" 3 3 3
chk_add_nr 1 1
+# accept and use add_addr with additional subflows and link loss
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 3
+ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 3
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
+ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
+run_tests $ns1 $ns2 10.0.1.1 1
+chk_join_nr "multiple flows, signal, link failure" 3 3 3
+chk_add_nr 1 1
+
# add_addr timeout
reset_with_add_addr_timeout
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
ip netns exec $ns2 ./pm_nl_ctl limits 1 1
ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
-run_tests $ns1 $ns2 10.0.1.1 0 0 slow
+run_tests $ns1 $ns2 10.0.1.1 0 0 0 slow
chk_join_nr "signal address, ADD_ADDR timeout" 1 1 1
chk_add_nr 4 0
@@ -542,7 +602,7 @@ reset
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
ip netns exec $ns2 ./pm_nl_ctl limits 0 1
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 1 slow
+run_tests $ns1 $ns2 10.0.1.1 0 0 1 slow
chk_join_nr "remove single subflow" 1 1 1
chk_rm_nr 1 1
@@ -552,7 +612,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
ip netns exec $ns2 ./pm_nl_ctl limits 0 2
ip netns exec $ns2 ./pm_nl_ctl add 10.0.2.2 flags subflow
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 0 2 slow
+run_tests $ns1 $ns2 10.0.1.1 0 0 2 slow
chk_join_nr "remove multiple subflows" 2 2 2
chk_rm_nr 2 2
@@ -561,7 +621,7 @@ reset
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 1
-run_tests $ns1 $ns2 10.0.1.1 1 0 slow
+run_tests $ns1 $ns2 10.0.1.1 0 1 0 slow
chk_join_nr "remove single address" 1 1 1
chk_add_nr 1 1
chk_rm_nr 0 0
@@ -572,7 +632,7 @@ ip netns exec $ns1 ./pm_nl_ctl limits 0 2
ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 2
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 1 1 slow
+run_tests $ns1 $ns2 10.0.1.1 0 1 1 slow
chk_join_nr "remove subflow and signal" 2 2 2
chk_add_nr 1 1
chk_rm_nr 1 1
@@ -584,7 +644,7 @@ ip netns exec $ns1 ./pm_nl_ctl add 10.0.2.1 flags signal
ip netns exec $ns2 ./pm_nl_ctl limits 1 3
ip netns exec $ns2 ./pm_nl_ctl add 10.0.3.2 flags subflow
ip netns exec $ns2 ./pm_nl_ctl add 10.0.4.2 flags subflow
-run_tests $ns1 $ns2 10.0.1.1 1 2 slow
+run_tests $ns1 $ns2 10.0.1.1 0 1 2 slow
chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 53/84] selftests: mptcp: add ADD_ADDR IPv6 test cases
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (51 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 52/84] selftests: mptcp: add link failure " Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 54/84] selftests: mptcp: launch mptcp_connect with timeout Greg Kroah-Hartman
` (36 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Geliang Tang,
Mat Martineau, Jakub Kicinski, Sasha Levin
From: Geliang Tang <geliangtang@gmail.com>
[ Upstream commit 523514ed0a998fda389b9b6f00d0f2054ba30d25 ]
This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../testing/selftests/net/mptcp/mptcp_join.sh | 70 ++++++++++++++++++-
1 file changed, 69 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index f841ed8186c1..0eae628d1ffd 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -195,6 +195,12 @@ link_failure()
ip -net "$ns" link set "$veth" down
}
+# $1: IP address
+is_v6()
+{
+ [ -z "${1##*:*}" ]
+}
+
do_transfer()
{
listener_ns="$1"
@@ -236,7 +242,15 @@ do_transfer()
mptcp_connect="./mptcp_connect -r"
fi
- ip netns exec ${listener_ns} $mptcp_connect -t $timeout -l -p $port -s ${srv_proto} 0.0.0.0 < "$sin" > "$sout" &
+ local local_addr
+ if is_v6 "${connect_addr}"; then
+ local_addr="::"
+ else
+ local_addr="0.0.0.0"
+ fi
+
+ ip netns exec ${listener_ns} $mptcp_connect -t $timeout -l -p $port \
+ -s ${srv_proto} ${local_addr} < "$sin" > "$sout" &
spid=$!
sleep 1
@@ -649,6 +663,60 @@ chk_join_nr "remove subflows and signal" 3 3 3
chk_add_nr 1 1
chk_rm_nr 2 2
+# subflow IPv6
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+chk_join_nr "single subflow IPv6" 1 1 1
+
+# add_address, unused IPv6
+reset
+ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+chk_join_nr "unused signal address IPv6" 0 0 0
+chk_add_nr 1 1
+
+# signal address IPv6
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+chk_join_nr "single address IPv6" 1 1 1
+chk_add_nr 1 1
+
+# add_addr timeout IPv6
+reset_with_add_addr_timeout 6
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+run_tests $ns1 $ns2 dead:beef:1::1 0 0 0 slow
+chk_join_nr "signal address, ADD_ADDR6 timeout" 1 1 1
+chk_add_nr 4 0
+
+# single address IPv6, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 1
+ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 1
+run_tests $ns1 $ns2 dead:beef:1::1 0 1 0 slow
+chk_join_nr "remove single address IPv6" 1 1 1
+chk_add_nr 1 1
+chk_rm_nr 0 0
+
+# subflow and signal IPv6, remove
+reset
+ip netns exec $ns1 ./pm_nl_ctl limits 0 2
+ip netns exec $ns1 ./pm_nl_ctl add dead:beef:2::1 flags signal
+ip netns exec $ns2 ./pm_nl_ctl limits 1 2
+ip netns exec $ns2 ./pm_nl_ctl add dead:beef:3::2 flags subflow
+run_tests $ns1 $ns2 dead:beef:1::1 0 1 1 slow
+chk_join_nr "remove subflow and signal IPv6" 2 2 2
+chk_add_nr 1 1
+chk_rm_nr 1 1
+
# single subflow, syncookies
reset_with_cookies
ip netns exec $ns1 ./pm_nl_ctl limits 0 1
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 54/84] selftests: mptcp: launch mptcp_connect with timeout
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (52 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 53/84] selftests: mptcp: add ADD_ADDR IPv6 test cases Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 55/84] selftests: mptcp: fix diag instability Greg Kroah-Hartman
` (35 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthieu Baerts, Mat Martineau,
David S. Miller, Sasha Levin
From: Matthieu Baerts <matthieu.baerts@tessares.net>
[ Upstream commit 5888a61cb4e00695075bbacfd86f3fa73af00413 ]
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/mptcp/diag.sh | 55 ++++++++++++-------
.../selftests/net/mptcp/mptcp_connect.sh | 15 +++--
.../testing/selftests/net/mptcp/mptcp_join.sh | 22 ++++++--
.../selftests/net/mptcp/simult_flows.sh | 13 ++++-
4 files changed, 72 insertions(+), 33 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 39edce4f541c..2674ba20d524 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -5,8 +5,9 @@ rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
ns="ns1-$rndh"
ksft_skip=4
test_cnt=1
+timeout_poll=100
+timeout_test=$((timeout_poll * 2 + 1))
ret=0
-pids=()
flush_pids()
{
@@ -14,18 +15,14 @@ flush_pids()
# give it some time
sleep 1.1
- for pid in ${pids[@]}; do
- [ -d /proc/$pid ] && kill -SIGUSR1 $pid >/dev/null 2>&1
- done
- pids=()
+ ip netns pids "${ns}" | xargs --no-run-if-empty kill -SIGUSR1 &>/dev/null
}
cleanup()
{
+ ip netns pids "${ns}" | xargs --no-run-if-empty kill -SIGKILL &>/dev/null
+
ip netns del $ns
- for pid in ${pids[@]}; do
- [ -d /proc/$pid ] && kill -9 $pid >/dev/null 2>&1
- done
}
ip -Version > /dev/null 2>&1
@@ -79,39 +76,57 @@ trap cleanup EXIT
ip netns add $ns
ip -n $ns link set dev lo up
-echo "a" | ip netns exec $ns ./mptcp_connect -p 10000 -l 0.0.0.0 -t 100 >/dev/null &
+echo "a" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p 10000 -l -t ${timeout_poll} \
+ 0.0.0.0 >/dev/null &
sleep 0.1
-pids[0]=$!
chk_msk_nr 0 "no msk on netns creation"
-echo "b" | ip netns exec $ns ./mptcp_connect -p 10000 127.0.0.1 -j -t 100 >/dev/null &
+echo "b" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p 10000 -j -t ${timeout_poll} \
+ 127.0.0.1 >/dev/null &
sleep 0.1
-pids[1]=$!
chk_msk_nr 2 "after MPC handshake "
chk_msk_remote_key_nr 2 "....chk remote_key"
chk_msk_fallback_nr 0 "....chk no fallback"
flush_pids
-echo "a" | ip netns exec $ns ./mptcp_connect -p 10001 -s TCP -l 0.0.0.0 -t 100 >/dev/null &
-pids[0]=$!
+echo "a" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} \
+ 0.0.0.0 >/dev/null &
sleep 0.1
-echo "b" | ip netns exec $ns ./mptcp_connect -p 10001 127.0.0.1 -j -t 100 >/dev/null &
-pids[1]=$!
+echo "b" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p 10001 -j -t ${timeout_poll} \
+ 127.0.0.1 >/dev/null &
sleep 0.1
chk_msk_fallback_nr 1 "check fallback"
flush_pids
NR_CLIENTS=100
for I in `seq 1 $NR_CLIENTS`; do
- echo "a" | ip netns exec $ns ./mptcp_connect -p $((I+10001)) -l 0.0.0.0 -t 100 -w 10 >/dev/null &
- pids[$((I*2))]=$!
+ echo "a" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p $((I+10001)) -l -w 10 \
+ -t ${timeout_poll} 0.0.0.0 >/dev/null &
done
sleep 0.1
for I in `seq 1 $NR_CLIENTS`; do
- echo "b" | ip netns exec $ns ./mptcp_connect -p $((I+10001)) 127.0.0.1 -t 100 -w 10 >/dev/null &
- pids[$((I*2 + 1))]=$!
+ echo "b" | \
+ timeout ${timeout_test} \
+ ip netns exec $ns \
+ ./mptcp_connect -p $((I+10001)) -w 10 \
+ -t ${timeout_poll} 127.0.0.1 >/dev/null &
done
sleep 1.5
diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
index 987a914ee0df..4d94c4e81d49 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh
@@ -11,7 +11,8 @@ cin=""
cout=""
ksft_skip=4
capture=false
-timeout=30
+timeout_poll=30
+timeout_test=$((timeout_poll * 2 + 1))
ipv6=true
ethtool_random_on=true
tc_delay="$((RANDOM%50))"
@@ -269,7 +270,7 @@ check_mptcp_disabled()
ip netns exec ${disabled_ns} sysctl -q net.mptcp.enabled=0
local err=0
- LANG=C ip netns exec ${disabled_ns} ./mptcp_connect -t $timeout -p 10000 -s MPTCP 127.0.0.1 < "$cin" 2>&1 | \
+ LANG=C ip netns exec ${disabled_ns} ./mptcp_connect -p 10000 -s MPTCP 127.0.0.1 < "$cin" 2>&1 | \
grep -q "^socket: Protocol not available$" && err=1
ip netns delete ${disabled_ns}
@@ -411,14 +412,20 @@ do_transfer()
local stat_cookietx_last=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesSent | while read a count c rest ;do echo $count;done)
local stat_cookierx_last=$(ip netns exec ${listener_ns} nstat -z -a TcpExtSyncookiesRecv | while read a count c rest ;do echo $count;done)
- ip netns exec ${listener_ns} ./mptcp_connect -t $timeout -l -p $port -s ${srv_proto} $extra_args $local_addr < "$sin" > "$sout" &
+ timeout ${timeout_test} \
+ ip netns exec ${listener_ns} \
+ ./mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \
+ $extra_args $local_addr < "$sin" > "$sout" &
local spid=$!
wait_local_port_listen "${listener_ns}" "${port}"
local start
start=$(date +%s%3N)
- ip netns exec ${connector_ns} ./mptcp_connect -t $timeout -p $port -s ${cl_proto} $extra_args $connect_addr < "$cin" > "$cout" &
+ timeout ${timeout_test} \
+ ip netns exec ${connector_ns} \
+ ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
+ $extra_args $connect_addr < "$cin" > "$cout" &
local cpid=$!
wait $cpid
diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index 0eae628d1ffd..1a9c1c0a5692 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -8,7 +8,8 @@ cin=""
cinsent=""
cout=""
ksft_skip=4
-timeout=30
+timeout_poll=30
+timeout_test=$((timeout_poll * 2 + 1))
mptcp_connect=""
capture=0
@@ -249,17 +250,26 @@ do_transfer()
local_addr="0.0.0.0"
fi
- ip netns exec ${listener_ns} $mptcp_connect -t $timeout -l -p $port \
- -s ${srv_proto} ${local_addr} < "$sin" > "$sout" &
+ timeout ${timeout_test} \
+ ip netns exec ${listener_ns} \
+ $mptcp_connect -t ${timeout_poll} -l -p $port -s ${srv_proto} \
+ ${local_addr} < "$sin" > "$sout" &
spid=$!
sleep 1
if [ "$test_link_fail" -eq 0 ];then
- ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr < "$cin" > "$cout" &
+ timeout ${timeout_test} \
+ ip netns exec ${connector_ns} \
+ $mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
+ $connect_addr < "$cin" > "$cout" &
else
- ( cat "$cin" ; sleep 2; link_failure $listener_ns ; cat "$cin" ) | tee "$cinsent" | \
- ip netns exec ${connector_ns} $mptcp_connect -t $timeout -p $port -s ${cl_proto} $connect_addr > "$cout" &
+ ( cat "$cin" ; sleep 2; link_failure $listener_ns ; cat "$cin" ) | \
+ tee "$cinsent" | \
+ timeout ${timeout_test} \
+ ip netns exec ${connector_ns} \
+ $mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \
+ $connect_addr > "$cout" &
fi
cpid=$!
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index 8fcb28927818..ce832b443475 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -7,7 +7,8 @@ ns2="ns2-$rndh"
ns3="ns3-$rndh"
capture=false
ksft_skip=4
-timeout=30
+timeout_poll=30
+timeout_test=$((timeout_poll * 2 + 1))
test_cnt=1
ret=0
bail=0
@@ -157,14 +158,20 @@ do_transfer()
sleep 1
fi
- ip netns exec ${ns3} ./mptcp_connect -jt $timeout -l -p $port 0.0.0.0 < "$sin" > "$sout" &
+ timeout ${timeout_test} \
+ ip netns exec ${ns3} \
+ ./mptcp_connect -jt ${timeout_poll} -l -p $port \
+ 0.0.0.0 < "$sin" > "$sout" &
local spid=$!
wait_local_port_listen "${ns3}" "${port}"
local start
start=$(date +%s%3N)
- ip netns exec ${ns1} ./mptcp_connect -jt $timeout -p $port 10.0.3.3 < "$cin" > "$cout" &
+ timeout ${timeout_test} \
+ ip netns exec ${ns1} \
+ ./mptcp_connect -jt ${timeout_poll} -p $port \
+ 10.0.3.3 < "$cin" > "$cout" &
local cpid=$!
wait $cpid
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 55/84] selftests: mptcp: fix diag instability
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (53 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 54/84] selftests: mptcp: launch mptcp_connect with timeout Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 56/84] selftests: mptcp: more stable diag tests Greg Kroah-Hartman
` (34 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Mat Martineau,
David S. Miller, Sasha Levin, Matthieu Baerts
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit 0cd33c5ffec12bd77a1c02db2469fac08f840939 ]
Instead of waiting for an arbitrary amount of time for the MPTCP
MP_CAPABLE handshake to complete, explicitly wait for the relevant
socket to enter into the established status.
Additionally let the data transfer application use the slowest
transfer mode available (-r), to cope with very slow host, or
high jitter caused by hosting VMs.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/258
Reported-and-tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/mptcp/diag.sh | 44 +++++++++++++++++++----
1 file changed, 37 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index 2674ba20d524..ff821025d309 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -71,6 +71,36 @@ chk_msk_remote_key_nr()
__chk_nr "grep -c remote_key" $*
}
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+ local listener_ns="${1}"
+ local port="${2}"
+
+ local port_hex i
+
+ port_hex="$(printf "%04X" "${port}")"
+ for i in $(seq 10); do
+ ip netns exec "${listener_ns}" cat /proc/net/tcp | \
+ awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+ break
+ sleep 0.1
+ done
+}
+
+wait_connected()
+{
+ local listener_ns="${1}"
+ local port="${2}"
+
+ local port_hex i
+
+ port_hex="$(printf "%04X" "${port}")"
+ for i in $(seq 10); do
+ ip netns exec ${listener_ns} grep -q " 0100007F:${port_hex} " /proc/net/tcp && break
+ sleep 0.1
+ done
+}
trap cleanup EXIT
ip netns add $ns
@@ -81,15 +111,15 @@ echo "a" | \
ip netns exec $ns \
./mptcp_connect -p 10000 -l -t ${timeout_poll} \
0.0.0.0 >/dev/null &
-sleep 0.1
+wait_local_port_listen $ns 10000
chk_msk_nr 0 "no msk on netns creation"
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10000 -j -t ${timeout_poll} \
+ ./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} \
127.0.0.1 >/dev/null &
-sleep 0.1
+wait_connected $ns 10000
chk_msk_nr 2 "after MPC handshake "
chk_msk_remote_key_nr 2 "....chk remote_key"
chk_msk_fallback_nr 0 "....chk no fallback"
@@ -101,13 +131,13 @@ echo "a" | \
ip netns exec $ns \
./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} \
0.0.0.0 >/dev/null &
-sleep 0.1
+wait_local_port_listen $ns 10001
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10001 -j -t ${timeout_poll} \
+ ./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} \
127.0.0.1 >/dev/null &
-sleep 0.1
+wait_connected $ns 10001
chk_msk_fallback_nr 1 "check fallback"
flush_pids
@@ -119,7 +149,7 @@ for I in `seq 1 $NR_CLIENTS`; do
./mptcp_connect -p $((I+10001)) -l -w 10 \
-t ${timeout_poll} 0.0.0.0 >/dev/null &
done
-sleep 0.1
+wait_local_port_listen $ns $((NR_CLIENTS + 10001))
for I in `seq 1 $NR_CLIENTS`; do
echo "b" | \
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 56/84] selftests: mptcp: more stable diag tests
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (54 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 55/84] selftests: mptcp: fix diag instability Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 57/84] sit: use min Greg Kroah-Hartman
` (33 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paolo Abeni, Mat Martineau,
Jakub Kicinski, Sasha Levin
From: Paolo Abeni <pabeni@redhat.com>
[ Upstream commit 42fb6cddec3b306c9f6ef136b6438e0de1836431 ]
The mentioned test-case still use an hard-coded-len sleep to
wait for a relative large number of connection to be established.
On very slow VM and with debug build such timeout could be exceeded,
causing failures in our CI.
Address the issue polling for the expected condition several times,
up to an unreasonable high amount of time. On reasonably fast system
the self-tests will be faster then before, on very slow one we will
still catch the correct condition.
Fixes: df62f2ec3df6 ("selftests/mptcp: add diag interface tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
tools/testing/selftests/net/mptcp/diag.sh | 48 +++++++++++++++++++----
1 file changed, 40 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh
index ff821025d309..49dfabded1d4 100755
--- a/tools/testing/selftests/net/mptcp/diag.sh
+++ b/tools/testing/selftests/net/mptcp/diag.sh
@@ -61,6 +61,39 @@ chk_msk_nr()
__chk_nr "grep -c token:" $*
}
+wait_msk_nr()
+{
+ local condition="grep -c token:"
+ local expected=$1
+ local timeout=20
+ local msg nr
+ local max=0
+ local i=0
+
+ shift 1
+ msg=$*
+
+ while [ $i -lt $timeout ]; do
+ nr=$(ss -inmHMN $ns | $condition)
+ [ $nr == $expected ] && break;
+ [ $nr -gt $max ] && max=$nr
+ i=$((i + 1))
+ sleep 1
+ done
+
+ printf "%-50s" "$msg"
+ if [ $i -ge $timeout ]; then
+ echo "[ fail ] timeout while expecting $expected max $max last $nr"
+ ret=$test_cnt
+ elif [ $nr != $expected ]; then
+ echo "[ fail ] expected $expected found $nr"
+ ret=$test_cnt
+ else
+ echo "[ ok ]"
+ fi
+ test_cnt=$((test_cnt+1))
+}
+
chk_msk_fallback_nr()
{
__chk_nr "grep -c fallback" $*
@@ -109,7 +142,7 @@ ip -n $ns link set dev lo up
echo "a" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10000 -l -t ${timeout_poll} \
+ ./mptcp_connect -p 10000 -l -t ${timeout_poll} -w 20 \
0.0.0.0 >/dev/null &
wait_local_port_listen $ns 10000
chk_msk_nr 0 "no msk on netns creation"
@@ -117,7 +150,7 @@ chk_msk_nr 0 "no msk on netns creation"
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} \
+ ./mptcp_connect -p 10000 -r 0 -t ${timeout_poll} -w 20 \
127.0.0.1 >/dev/null &
wait_connected $ns 10000
chk_msk_nr 2 "after MPC handshake "
@@ -129,13 +162,13 @@ flush_pids
echo "a" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} \
+ ./mptcp_connect -p 10001 -l -s TCP -t ${timeout_poll} -w 20 \
0.0.0.0 >/dev/null &
wait_local_port_listen $ns 10001
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} \
+ ./mptcp_connect -p 10001 -r 0 -t ${timeout_poll} -w 20 \
127.0.0.1 >/dev/null &
wait_connected $ns 10001
chk_msk_fallback_nr 1 "check fallback"
@@ -146,7 +179,7 @@ for I in `seq 1 $NR_CLIENTS`; do
echo "a" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p $((I+10001)) -l -w 10 \
+ ./mptcp_connect -p $((I+10001)) -l -w 20 \
-t ${timeout_poll} 0.0.0.0 >/dev/null &
done
wait_local_port_listen $ns $((NR_CLIENTS + 10001))
@@ -155,12 +188,11 @@ for I in `seq 1 $NR_CLIENTS`; do
echo "b" | \
timeout ${timeout_test} \
ip netns exec $ns \
- ./mptcp_connect -p $((I+10001)) -w 10 \
+ ./mptcp_connect -p $((I+10001)) -w 20 \
-t ${timeout_poll} 127.0.0.1 >/dev/null &
done
-sleep 1.5
-chk_msk_nr $((NR_CLIENTS*2)) "many msk socket present"
+wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present"
flush_pids
exit $ret
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 57/84] sit: use min
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (55 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 56/84] selftests: mptcp: more stable diag tests Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 58/84] ipv6/sit: fix ipip6_tunnel_get_prl return value Greg Kroah-Hartman
` (32 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Denis Efremov, kernel test robot,
David Ahern, David S. Miller, Sasha Levin
From: kernel test robot <lkp@intel.com>
[ Upstream commit 284fda1eff8a8b27d2cafd7dc8fb423d13720f21 ]
Opportunity for min()
Generated by: scripts/coccinelle/misc/minmax.cocci
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/sit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index bab0e99f6e35..0be82586ce32 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -323,7 +323,7 @@ static int ipip6_tunnel_get_prl(struct net_device *dev, struct ifreq *ifr)
rcu_read_lock();
- ca = t->prl_count < cmax ? t->prl_count : cmax;
+ ca = min(t->prl_count, cmax);
if (!kp) {
/* We don't try hard to allocate much memory for
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 58/84] ipv6/sit: fix ipip6_tunnel_get_prl return value
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (56 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 57/84] sit: use min Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 59/84] hwmon: (ibmaem) dont call platform_device_del() if platform_device_add() fails Greg Kroah-Hartman
` (31 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, katrinzhou, Eric Dumazet, David Ahern,
Jakub Kicinski, Sasha Levin
From: katrinzhou <katrinzhou@tencent.com>
[ Upstream commit adabdd8f6acabc0c3fdbba2e7f5a2edd9c5ef22d ]
When kcalloc fails, ipip6_tunnel_get_prl() should return -ENOMEM.
Move the position of label "out" to return correctly.
Addresses-Coverity: ("Unused value")
Fixes: 300aaeeaab5f ("[IPV6] SIT: Add SIOCGETPRL ioctl to get/dump PRL.")
Signed-off-by: katrinzhou <katrinzhou@tencent.com>
Reviewed-by: Eric Dumazet<edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220628035030.1039171-1-zys.zljxml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/ipv6/sit.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 0be82586ce32..3c92e8cacbba 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -321,8 +321,6 @@ static int ipip6_tunnel_get_prl(struct net_device *dev, struct ifreq *ifr)
kcalloc(cmax, sizeof(*kp), GFP_KERNEL | __GFP_NOWARN) :
NULL;
- rcu_read_lock();
-
ca = min(t->prl_count, cmax);
if (!kp) {
@@ -338,7 +336,7 @@ static int ipip6_tunnel_get_prl(struct net_device *dev, struct ifreq *ifr)
}
}
- c = 0;
+ rcu_read_lock();
for_each_prl_rcu(t->prl) {
if (c >= cmax)
break;
@@ -350,7 +348,7 @@ static int ipip6_tunnel_get_prl(struct net_device *dev, struct ifreq *ifr)
if (kprl.addr != htonl(INADDR_ANY))
break;
}
-out:
+
rcu_read_unlock();
len = sizeof(*kp) * c;
@@ -359,7 +357,7 @@ static int ipip6_tunnel_get_prl(struct net_device *dev, struct ifreq *ifr)
ret = -EFAULT;
kfree(kp);
-
+out:
return ret;
}
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 59/84] hwmon: (ibmaem) dont call platform_device_del() if platform_device_add() fails
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (57 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 58/84] ipv6/sit: fix ipip6_tunnel_get_prl return value Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 60/84] selftests/rseq: remove ARRAY_SIZE define from individual tests Greg Kroah-Hartman
` (30 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hulk Robot, Yang Yingliang,
Guenter Roeck, Sasha Levin
From: Yang Yingliang <yangyingliang@huawei.com>
[ Upstream commit d0e51022a025ca5350fafb8e413a6fe5d4baf833 ]
If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.
Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hwmon/ibmaem.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
index a4ec85207782..2e6d6a5cffa1 100644
--- a/drivers/hwmon/ibmaem.c
+++ b/drivers/hwmon/ibmaem.c
@@ -550,7 +550,7 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
res = platform_device_add(data->pdev);
if (res)
- goto ipmi_err;
+ goto dev_add_err;
platform_set_drvdata(data->pdev, data);
@@ -598,7 +598,9 @@ static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
ipmi_destroy_user(data->ipmi.user);
ipmi_err:
platform_set_drvdata(data->pdev, NULL);
- platform_device_unregister(data->pdev);
+ platform_device_del(data->pdev);
+dev_add_err:
+ platform_device_put(data->pdev);
dev_err:
ida_simple_remove(&aem_ida, data->id);
id_err:
@@ -690,7 +692,7 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
res = platform_device_add(data->pdev);
if (res)
- goto ipmi_err;
+ goto dev_add_err;
platform_set_drvdata(data->pdev, data);
@@ -738,7 +740,9 @@ static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
ipmi_destroy_user(data->ipmi.user);
ipmi_err:
platform_set_drvdata(data->pdev, NULL);
- platform_device_unregister(data->pdev);
+ platform_device_del(data->pdev);
+dev_add_err:
+ platform_device_put(data->pdev);
dev_err:
ida_simple_remove(&aem_ida, data->id);
id_err:
--
2.35.1
^ permalink raw reply related [flat|nested] 95+ messages in thread* [PATCH 5.10 60/84] selftests/rseq: remove ARRAY_SIZE define from individual tests
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (58 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 59/84] hwmon: (ibmaem) dont call platform_device_del() if platform_device_add() fails Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 61/84] selftests/rseq: introduce own copy of rseq uapi header Greg Kroah-Hartman
` (29 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Shuah Khan
From: Shuah Khan <skhan@linuxfoundation.org>
commit 07ad4f7629d4802ff0d962b0ac23ea6445964e2a upstream.
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/basic_percpu_ops_test.c | 3 +--
tools/testing/selftests/rseq/rseq.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
--- a/tools/testing/selftests/rseq/basic_percpu_ops_test.c
+++ b/tools/testing/selftests/rseq/basic_percpu_ops_test.c
@@ -9,10 +9,9 @@
#include <string.h>
#include <stddef.h>
+#include "../kselftest.h"
#include "rseq.h"
-#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
-
struct percpu_lock_entry {
intptr_t v;
} __attribute__((aligned(128)));
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -27,10 +27,9 @@
#include <signal.h>
#include <limits.h>
+#include "../kselftest.h"
#include "rseq.h"
-#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
-
__thread volatile struct rseq __rseq_abi = {
.cpu_id = RSEQ_CPU_ID_UNINITIALIZED,
};
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 61/84] selftests/rseq: introduce own copy of rseq uapi header
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (59 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 60/84] selftests/rseq: remove ARRAY_SIZE define from individual tests Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 62/84] selftests/rseq: Remove useless assignment to cpu variable Greg Kroah-Hartman
` (28 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 5c105d55a9dc9e01535116ccfc26e703168a574f upstream.
The Linux kernel rseq uapi header has a broken layout for the
rseq_cs.ptr field on 32-bit little endian architectures. The entire
rseq_cs.ptr field is planned for removal, leaving only the 64-bit
rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi
header, where they introduce proper union fields to access to the 32-bit
low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel
selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-abi.h | 151 ++++++++++++++++++++++++++++++++
tools/testing/selftests/rseq/rseq.c | 14 +-
tools/testing/selftests/rseq/rseq.h | 10 --
3 files changed, 161 insertions(+), 14 deletions(-)
create mode 100644 tools/testing/selftests/rseq/rseq-abi.h
--- /dev/null
+++ b/tools/testing/selftests/rseq/rseq-abi.h
@@ -0,0 +1,151 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _RSEQ_ABI_H
+#define _RSEQ_ABI_H
+
+/*
+ * rseq-abi.h
+ *
+ * Restartable sequences system call API
+ *
+ * Copyright (c) 2015-2022 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+enum rseq_abi_cpu_id_state {
+ RSEQ_ABI_CPU_ID_UNINITIALIZED = -1,
+ RSEQ_ABI_CPU_ID_REGISTRATION_FAILED = -2,
+};
+
+enum rseq_abi_flags {
+ RSEQ_ABI_FLAG_UNREGISTER = (1 << 0),
+};
+
+enum rseq_abi_cs_flags_bit {
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT = 0,
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT = 1,
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT = 2,
+};
+
+enum rseq_abi_cs_flags {
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT =
+ (1U << RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT),
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL =
+ (1U << RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT),
+ RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE =
+ (1U << RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT),
+};
+
+/*
+ * struct rseq_abi_cs is aligned on 4 * 8 bytes to ensure it is always
+ * contained within a single cache-line. It is usually declared as
+ * link-time constant data.
+ */
+struct rseq_abi_cs {
+ /* Version of this structure. */
+ __u32 version;
+ /* enum rseq_abi_cs_flags */
+ __u32 flags;
+ __u64 start_ip;
+ /* Offset from start_ip. */
+ __u64 post_commit_offset;
+ __u64 abort_ip;
+} __attribute__((aligned(4 * sizeof(__u64))));
+
+/*
+ * struct rseq_abi is aligned on 4 * 8 bytes to ensure it is always
+ * contained within a single cache-line.
+ *
+ * A single struct rseq_abi per thread is allowed.
+ */
+struct rseq_abi {
+ /*
+ * Restartable sequences cpu_id_start field. Updated by the
+ * kernel. Read by user-space with single-copy atomicity
+ * semantics. This field should only be read by the thread which
+ * registered this data structure. Aligned on 32-bit. Always
+ * contains a value in the range of possible CPUs, although the
+ * value may not be the actual current CPU (e.g. if rseq is not
+ * initialized). This CPU number value should always be compared
+ * against the value of the cpu_id field before performing a rseq
+ * commit or returning a value read from a data structure indexed
+ * using the cpu_id_start value.
+ */
+ __u32 cpu_id_start;
+ /*
+ * Restartable sequences cpu_id field. Updated by the kernel.
+ * Read by user-space with single-copy atomicity semantics. This
+ * field should only be read by the thread which registered this
+ * data structure. Aligned on 32-bit. Values
+ * RSEQ_CPU_ID_UNINITIALIZED and RSEQ_CPU_ID_REGISTRATION_FAILED
+ * have a special semantic: the former means "rseq uninitialized",
+ * and latter means "rseq initialization failed". This value is
+ * meant to be read within rseq critical sections and compared
+ * with the cpu_id_start value previously read, before performing
+ * the commit instruction, or read and compared with the
+ * cpu_id_start value before returning a value loaded from a data
+ * structure indexed using the cpu_id_start value.
+ */
+ __u32 cpu_id;
+ /*
+ * Restartable sequences rseq_cs field.
+ *
+ * Contains NULL when no critical section is active for the current
+ * thread, or holds a pointer to the currently active struct rseq_cs.
+ *
+ * Updated by user-space, which sets the address of the currently
+ * active rseq_cs at the beginning of assembly instruction sequence
+ * block, and set to NULL by the kernel when it restarts an assembly
+ * instruction sequence block, as well as when the kernel detects that
+ * it is preempting or delivering a signal outside of the range
+ * targeted by the rseq_cs. Also needs to be set to NULL by user-space
+ * before reclaiming memory that contains the targeted struct rseq_cs.
+ *
+ * Read and set by the kernel. Set by user-space with single-copy
+ * atomicity semantics. This field should only be updated by the
+ * thread which registered this data structure. Aligned on 64-bit.
+ */
+ union {
+ __u64 ptr64;
+
+ /*
+ * The "arch" field provides architecture accessor for
+ * the ptr field based on architecture pointer size and
+ * endianness.
+ */
+ struct {
+#ifdef __LP64__
+ __u64 ptr;
+#elif defined(__BYTE_ORDER) ? (__BYTE_ORDER == __BIG_ENDIAN) : defined(__BIG_ENDIAN)
+ __u32 padding; /* Initialized to zero. */
+ __u32 ptr;
+#else
+ __u32 ptr;
+ __u32 padding; /* Initialized to zero. */
+#endif
+ } arch;
+ } rseq_cs;
+
+ /*
+ * Restartable sequences flags field.
+ *
+ * This field should only be updated by the thread which
+ * registered this data structure. Read by the kernel.
+ * Mainly used for single-stepping through rseq critical sections
+ * with debuggers.
+ *
+ * - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_PREEMPT
+ * Inhibit instruction sequence block restart on preemption
+ * for this thread.
+ * - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_SIGNAL
+ * Inhibit instruction sequence block restart on signal
+ * delivery for this thread.
+ * - RSEQ_ABI_CS_FLAG_NO_RESTART_ON_MIGRATE
+ * Inhibit instruction sequence block restart on migration for
+ * this thread.
+ */
+ __u32 flags;
+} __attribute__((aligned(4 * sizeof(__u64))));
+
+#endif /* _RSEQ_ABI_H */
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -30,8 +30,8 @@
#include "../kselftest.h"
#include "rseq.h"
-__thread volatile struct rseq __rseq_abi = {
- .cpu_id = RSEQ_CPU_ID_UNINITIALIZED,
+__thread volatile struct rseq_abi __rseq_abi = {
+ .cpu_id = RSEQ_ABI_CPU_ID_UNINITIALIZED,
};
/*
@@ -66,7 +66,7 @@ static void signal_restore(sigset_t olds
abort();
}
-static int sys_rseq(volatile struct rseq *rseq_abi, uint32_t rseq_len,
+static int sys_rseq(volatile struct rseq_abi *rseq_abi, uint32_t rseq_len,
int flags, uint32_t sig)
{
return syscall(__NR_rseq, rseq_abi, rseq_len, flags, sig);
@@ -86,13 +86,13 @@ int rseq_register_current_thread(void)
}
if (__rseq_refcount++)
goto end;
- rc = sys_rseq(&__rseq_abi, sizeof(struct rseq), 0, RSEQ_SIG);
+ rc = sys_rseq(&__rseq_abi, sizeof(struct rseq_abi), 0, RSEQ_SIG);
if (!rc) {
assert(rseq_current_cpu_raw() >= 0);
goto end;
}
if (errno != EBUSY)
- __rseq_abi.cpu_id = RSEQ_CPU_ID_REGISTRATION_FAILED;
+ __rseq_abi.cpu_id = RSEQ_ABI_CPU_ID_REGISTRATION_FAILED;
ret = -1;
__rseq_refcount--;
end:
@@ -114,8 +114,8 @@ int rseq_unregister_current_thread(void)
}
if (--__rseq_refcount)
goto end;
- rc = sys_rseq(&__rseq_abi, sizeof(struct rseq),
- RSEQ_FLAG_UNREGISTER, RSEQ_SIG);
+ rc = sys_rseq(&__rseq_abi, sizeof(struct rseq_abi),
+ RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG);
if (!rc)
goto end;
__rseq_refcount = 1;
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -16,7 +16,7 @@
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
-#include <linux/rseq.h>
+#include "rseq-abi.h"
/*
* Empty code injection macros, override when testing.
@@ -43,7 +43,7 @@
#define RSEQ_INJECT_FAILED
#endif
-extern __thread volatile struct rseq __rseq_abi;
+extern __thread volatile struct rseq_abi __rseq_abi;
extern int __rseq_handled;
#define rseq_likely(x) __builtin_expect(!!(x), 1)
@@ -139,11 +139,7 @@ static inline uint32_t rseq_current_cpu(
static inline void rseq_clear_rseq_cs(void)
{
-#ifdef __LP64__
- __rseq_abi.rseq_cs.ptr = 0;
-#else
- __rseq_abi.rseq_cs.ptr.ptr32 = 0;
-#endif
+ __rseq_abi.rseq_cs.arch.ptr = 0;
}
/*
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 62/84] selftests/rseq: Remove useless assignment to cpu variable
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (60 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 61/84] selftests/rseq: introduce own copy of rseq uapi header Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 63/84] selftests/rseq: Remove volatile from __rseq_abi Greg Kroah-Hartman
` (27 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 930378d056eac2c96407b02aafe4938d0ac9cc37 upstream.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-4-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/param_test.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/tools/testing/selftests/rseq/param_test.c
+++ b/tools/testing/selftests/rseq/param_test.c
@@ -368,9 +368,7 @@ void *test_percpu_spinlock_thread(void *
abort();
reps = thread_data->reps;
for (i = 0; i < reps; i++) {
- int cpu = rseq_cpu_start();
-
- cpu = rseq_this_cpu_lock(&data->lock);
+ int cpu = rseq_this_cpu_lock(&data->lock);
data->c[cpu].count++;
rseq_percpu_unlock(&data->lock, cpu);
#ifndef BENCHMARK
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 63/84] selftests/rseq: Remove volatile from __rseq_abi
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (61 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 62/84] selftests/rseq: Remove useless assignment to cpu variable Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 64/84] selftests/rseq: Introduce rseq_get_abi() helper Greg Kroah-Hartman
` (26 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 94b80a19ebfe347a01301d750040a61c38200e2b upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
All accesses to the __rseq_abi fields are volatile, but remove the
volatile from the TLS variable declaration, otherwise we are stuck with
volatile for the upcoming rseq_get_abi() helper.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-5-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq.c | 4 ++--
tools/testing/selftests/rseq/rseq.h | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -30,7 +30,7 @@
#include "../kselftest.h"
#include "rseq.h"
-__thread volatile struct rseq_abi __rseq_abi = {
+__thread struct rseq_abi __rseq_abi = {
.cpu_id = RSEQ_ABI_CPU_ID_UNINITIALIZED,
};
@@ -92,7 +92,7 @@ int rseq_register_current_thread(void)
goto end;
}
if (errno != EBUSY)
- __rseq_abi.cpu_id = RSEQ_ABI_CPU_ID_REGISTRATION_FAILED;
+ RSEQ_WRITE_ONCE(__rseq_abi.cpu_id, RSEQ_ABI_CPU_ID_REGISTRATION_FAILED);
ret = -1;
__rseq_refcount--;
end:
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -43,7 +43,7 @@
#define RSEQ_INJECT_FAILED
#endif
-extern __thread volatile struct rseq_abi __rseq_abi;
+extern __thread struct rseq_abi __rseq_abi;
extern int __rseq_handled;
#define rseq_likely(x) __builtin_expect(!!(x), 1)
@@ -139,7 +139,7 @@ static inline uint32_t rseq_current_cpu(
static inline void rseq_clear_rseq_cs(void)
{
- __rseq_abi.rseq_cs.arch.ptr = 0;
+ RSEQ_WRITE_ONCE(__rseq_abi.rseq_cs.arch.ptr, 0);
}
/*
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 64/84] selftests/rseq: Introduce rseq_get_abi() helper
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (62 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 63/84] selftests/rseq: Remove volatile from __rseq_abi Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 65/84] selftests/rseq: Introduce thread pointer getters Greg Kroah-Hartman
` (25 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit e546cd48ccc456074ddb8920732aef4af65d7ca7 upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer, rather than through an actual
Thread-Local Storage (TLS) variable, as the kernel selftests initially
expected.
Introduce a rseq_get_abi() helper, initially using the __rseq_abi
TLS variable, in preparation for changing this userspace ABI for one
which is compatible with glibc-2.35.
Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data
cannot actively coexist in a process, because the kernel supports only
a single rseq registration per thread.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-6-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-arm.h | 32 +++++++++++++++---------------
tools/testing/selftests/rseq/rseq-arm64.h | 32 +++++++++++++++---------------
tools/testing/selftests/rseq/rseq-mips.h | 32 +++++++++++++++---------------
tools/testing/selftests/rseq/rseq-ppc.h | 32 +++++++++++++++---------------
tools/testing/selftests/rseq/rseq-s390.h | 24 +++++++++++-----------
tools/testing/selftests/rseq/rseq-x86.h | 30 ++++++++++++++--------------
tools/testing/selftests/rseq/rseq.h | 11 +++++++---
7 files changed, 99 insertions(+), 94 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -185,8 +185,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -255,8 +255,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -316,8 +316,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[count] "Ir" (count)
RSEQ_INJECT_INPUT
@@ -381,8 +381,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -457,8 +457,8 @@ int rseq_cmpeqv_trystorev_storev_release
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -537,8 +537,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -657,8 +657,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
"8:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -782,8 +782,8 @@ int rseq_cmpeqv_trymemcpy_storev_release
"8:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-arm64.h
+++ b/tools/testing/selftests/rseq/rseq-arm64.h
@@ -230,8 +230,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "Qo" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -287,8 +287,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "Qo" (*v),
[expectnot] "r" (expectnot),
[load] "Qo" (*load),
@@ -337,8 +337,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "Qo" (*v),
[count] "r" (count)
RSEQ_INJECT_INPUT
@@ -388,8 +388,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -447,8 +447,8 @@ int rseq_cmpeqv_trystorev_storev_release
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -508,8 +508,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "Qo" (*v),
[expect] "r" (expect),
[v2] "Qo" (*v2),
@@ -569,8 +569,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -629,8 +629,8 @@ int rseq_cmpeqv_trymemcpy_storev_release
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "Qo" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
--- a/tools/testing/selftests/rseq/rseq-mips.h
+++ b/tools/testing/selftests/rseq/rseq-mips.h
@@ -190,8 +190,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -258,8 +258,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -319,8 +319,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[count] "Ir" (count)
RSEQ_INJECT_INPUT
@@ -382,8 +382,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -456,8 +456,8 @@ int rseq_cmpeqv_trystorev_storev_release
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -532,8 +532,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
"5:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -649,8 +649,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
"8:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -771,8 +771,8 @@ int rseq_cmpeqv_trymemcpy_storev_release
"8:\n\t"
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -235,8 +235,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -301,8 +301,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -359,8 +359,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -419,8 +419,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -489,8 +489,8 @@ int rseq_cmpeqv_trystorev_storev_release
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -560,8 +560,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -635,8 +635,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -711,8 +711,8 @@ int rseq_cmpeqv_trymemcpy_storev_release
RSEQ_ASM_DEFINE_ABORT(4, abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-s390.h
+++ b/tools/testing/selftests/rseq/rseq-s390.h
@@ -165,8 +165,8 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -233,8 +233,8 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -288,8 +288,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -347,8 +347,8 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -426,8 +426,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -534,8 +534,8 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [current_cpu_id] "m" (__rseq_abi.cpu_id),
- [rseq_cs] "m" (__rseq_abi.rseq_cs),
+ [current_cpu_id] "m" (rseq_get_abi()->cpu_id),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -141,7 +141,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -207,7 +207,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -258,7 +258,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[count] "er" (count)
@@ -314,7 +314,7 @@ int rseq_offset_deref_addv(intptr_t *ptr
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[ptr] "m" (*ptr),
[off] "er" (off),
@@ -372,7 +372,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -449,7 +449,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -555,7 +555,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -719,7 +719,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -785,7 +785,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -836,7 +836,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[count] "ir" (count)
@@ -894,7 +894,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* try store input */
[v2] "m" (*v2),
[newv2] "m" (newv2),
@@ -962,7 +962,7 @@ int rseq_cmpeqv_trystorev_storev_release
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -1032,7 +1032,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -1142,7 +1142,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
@@ -1255,7 +1255,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (&__rseq_abi),
+ [rseq_abi] "r" (rseq_get_abi()),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -46,6 +46,11 @@
extern __thread struct rseq_abi __rseq_abi;
extern int __rseq_handled;
+static inline struct rseq_abi *rseq_get_abi(void)
+{
+ return &__rseq_abi;
+}
+
#define rseq_likely(x) __builtin_expect(!!(x), 1)
#define rseq_unlikely(x) __builtin_expect(!!(x), 0)
#define rseq_barrier() __asm__ __volatile__("" : : : "memory")
@@ -108,7 +113,7 @@ int32_t rseq_fallback_current_cpu(void);
*/
static inline int32_t rseq_current_cpu_raw(void)
{
- return RSEQ_ACCESS_ONCE(__rseq_abi.cpu_id);
+ return RSEQ_ACCESS_ONCE(rseq_get_abi()->cpu_id);
}
/*
@@ -124,7 +129,7 @@ static inline int32_t rseq_current_cpu_r
*/
static inline uint32_t rseq_cpu_start(void)
{
- return RSEQ_ACCESS_ONCE(__rseq_abi.cpu_id_start);
+ return RSEQ_ACCESS_ONCE(rseq_get_abi()->cpu_id_start);
}
static inline uint32_t rseq_current_cpu(void)
@@ -139,7 +144,7 @@ static inline uint32_t rseq_current_cpu(
static inline void rseq_clear_rseq_cs(void)
{
- RSEQ_WRITE_ONCE(__rseq_abi.rseq_cs.arch.ptr, 0);
+ RSEQ_WRITE_ONCE(rseq_get_abi()->rseq_cs.arch.ptr, 0);
}
/*
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 65/84] selftests/rseq: Introduce thread pointer getters
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (63 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 64/84] selftests/rseq: Introduce rseq_get_abi() helper Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 66/84] selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35 Greg Kroah-Hartman
` (24 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 886ddfba933f5ce9d76c278165d834d114ba4ffc upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer.
The toolchains do not implement accessing the thread pointer on all
architectures. Provide thread pointer getters for ppc and x86 which
lack (or lacked until recently) toolchain support.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-7-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-generic-thread-pointer.h | 25 ++++++++
tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h | 30 +++++++++
tools/testing/selftests/rseq/rseq-thread-pointer.h | 19 ++++++
tools/testing/selftests/rseq/rseq-x86-thread-pointer.h | 40 +++++++++++++
4 files changed, 114 insertions(+)
create mode 100644 tools/testing/selftests/rseq/rseq-generic-thread-pointer.h
create mode 100644 tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h
create mode 100644 tools/testing/selftests/rseq/rseq-thread-pointer.h
create mode 100644 tools/testing/selftests/rseq/rseq-x86-thread-pointer.h
--- /dev/null
+++ b/tools/testing/selftests/rseq/rseq-generic-thread-pointer.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */
+/*
+ * rseq-generic-thread-pointer.h
+ *
+ * (C) Copyright 2021 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#ifndef _RSEQ_GENERIC_THREAD_POINTER
+#define _RSEQ_GENERIC_THREAD_POINTER
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Use gcc builtin thread pointer. */
+static inline void *rseq_thread_pointer(void)
+{
+ return __builtin_thread_pointer();
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+++ b/tools/testing/selftests/rseq/rseq-ppc-thread-pointer.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */
+/*
+ * rseq-ppc-thread-pointer.h
+ *
+ * (C) Copyright 2021 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#ifndef _RSEQ_PPC_THREAD_POINTER
+#define _RSEQ_PPC_THREAD_POINTER
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+static inline void *rseq_thread_pointer(void)
+{
+#ifdef __powerpc64__
+ register void *__result asm ("r13");
+#else
+ register void *__result asm ("r2");
+#endif
+ asm ("" : "=r" (__result));
+ return __result;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+++ b/tools/testing/selftests/rseq/rseq-thread-pointer.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */
+/*
+ * rseq-thread-pointer.h
+ *
+ * (C) Copyright 2021 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#ifndef _RSEQ_THREAD_POINTER
+#define _RSEQ_THREAD_POINTER
+
+#if defined(__x86_64__) || defined(__i386__)
+#include "rseq-x86-thread-pointer.h"
+#elif defined(__PPC__)
+#include "rseq-ppc-thread-pointer.h"
+#else
+#include "rseq-generic-thread-pointer.h"
+#endif
+
+#endif
--- /dev/null
+++ b/tools/testing/selftests/rseq/rseq-x86-thread-pointer.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */
+/*
+ * rseq-x86-thread-pointer.h
+ *
+ * (C) Copyright 2021 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#ifndef _RSEQ_X86_THREAD_POINTER
+#define _RSEQ_X86_THREAD_POINTER
+
+#include <features.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if __GNUC_PREREQ (11, 1)
+static inline void *rseq_thread_pointer(void)
+{
+ return __builtin_thread_pointer();
+}
+#else
+static inline void *rseq_thread_pointer(void)
+{
+ void *__result;
+
+# ifdef __x86_64__
+ __asm__ ("mov %%fs:0, %0" : "=r" (__result));
+# else
+ __asm__ ("mov %%gs:0, %0" : "=r" (__result));
+# endif
+ return __result;
+}
+#endif /* !GCC 11 */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 66/84] selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (64 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 65/84] selftests/rseq: Introduce thread pointer getters Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 67/84] selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian Greg Kroah-Hartman
` (23 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 233e667e1ae3e348686bd9dd0172e62a09d852e1 upstream.
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread
data in the TCB, accessible at an offset from the thread pointer, rather
than through an actual Thread-Local Storage (TLS) variable, as the
Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot
actively coexist in a process, because the kernel supports only a single
rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an
older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size,
__rseq_flags) using dlsym() in a librseq library constructor. If those
are found, copy their values into rseq_offset, rseq_size, and
rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration
from librseq and use its own IE-model TLS to implement the rseq ABI
per-thread storage.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/Makefile | 2
tools/testing/selftests/rseq/rseq.c | 161 ++++++++++++++++------------------
tools/testing/selftests/rseq/rseq.h | 13 ++
3 files changed, 88 insertions(+), 88 deletions(-)
--- a/tools/testing/selftests/rseq/Makefile
+++ b/tools/testing/selftests/rseq/Makefile
@@ -6,7 +6,7 @@ endif
CFLAGS += -O2 -Wall -g -I./ -I../../../../usr/include/ -L$(OUTPUT) -Wl,-rpath=./ \
$(CLANG_FLAGS)
-LDLIBS += -lpthread
+LDLIBS += -lpthread -ldl
# Own dependencies because we only want to build against 1st prerequisite, but
# still track changes to header files and depend on shared object.
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -26,103 +26,113 @@
#include <assert.h>
#include <signal.h>
#include <limits.h>
+#include <dlfcn.h>
#include "../kselftest.h"
#include "rseq.h"
-__thread struct rseq_abi __rseq_abi = {
- .cpu_id = RSEQ_ABI_CPU_ID_UNINITIALIZED,
-};
+static const int *libc_rseq_offset_p;
+static const unsigned int *libc_rseq_size_p;
+static const unsigned int *libc_rseq_flags_p;
+
+/* Offset from the thread pointer to the rseq area. */
+int rseq_offset;
+
+/* Size of the registered rseq area. 0 if the registration was
+ unsuccessful. */
+unsigned int rseq_size = -1U;
-/*
- * Shared with other libraries. This library may take rseq ownership if it is
- * still 0 when executing the library constructor. Set to 1 by library
- * constructor when handling rseq. Set to 0 in destructor if handling rseq.
- */
-int __rseq_handled;
+/* Flags used during rseq registration. */
+unsigned int rseq_flags;
-/* Whether this library have ownership of rseq registration. */
static int rseq_ownership;
-static __thread volatile uint32_t __rseq_refcount;
+static
+__thread struct rseq_abi __rseq_abi __attribute__((tls_model("initial-exec"))) = {
+ .cpu_id = RSEQ_ABI_CPU_ID_UNINITIALIZED,
+};
-static void signal_off_save(sigset_t *oldset)
+static int sys_rseq(struct rseq_abi *rseq_abi, uint32_t rseq_len,
+ int flags, uint32_t sig)
{
- sigset_t set;
- int ret;
-
- sigfillset(&set);
- ret = pthread_sigmask(SIG_BLOCK, &set, oldset);
- if (ret)
- abort();
+ return syscall(__NR_rseq, rseq_abi, rseq_len, flags, sig);
}
-static void signal_restore(sigset_t oldset)
+int rseq_available(void)
{
- int ret;
+ int rc;
- ret = pthread_sigmask(SIG_SETMASK, &oldset, NULL);
- if (ret)
+ rc = sys_rseq(NULL, 0, 0, 0);
+ if (rc != -1)
abort();
-}
-
-static int sys_rseq(volatile struct rseq_abi *rseq_abi, uint32_t rseq_len,
- int flags, uint32_t sig)
-{
- return syscall(__NR_rseq, rseq_abi, rseq_len, flags, sig);
+ switch (errno) {
+ case ENOSYS:
+ return 0;
+ case EINVAL:
+ return 1;
+ default:
+ abort();
+ }
}
int rseq_register_current_thread(void)
{
- int rc, ret = 0;
- sigset_t oldset;
+ int rc;
- if (!rseq_ownership)
+ if (!rseq_ownership) {
+ /* Treat libc's ownership as a successful registration. */
return 0;
- signal_off_save(&oldset);
- if (__rseq_refcount == UINT_MAX) {
- ret = -1;
- goto end;
}
- if (__rseq_refcount++)
- goto end;
rc = sys_rseq(&__rseq_abi, sizeof(struct rseq_abi), 0, RSEQ_SIG);
- if (!rc) {
- assert(rseq_current_cpu_raw() >= 0);
- goto end;
- }
- if (errno != EBUSY)
- RSEQ_WRITE_ONCE(__rseq_abi.cpu_id, RSEQ_ABI_CPU_ID_REGISTRATION_FAILED);
- ret = -1;
- __rseq_refcount--;
-end:
- signal_restore(oldset);
- return ret;
+ if (rc)
+ return -1;
+ assert(rseq_current_cpu_raw() >= 0);
+ return 0;
}
int rseq_unregister_current_thread(void)
{
- int rc, ret = 0;
- sigset_t oldset;
+ int rc;
- if (!rseq_ownership)
+ if (!rseq_ownership) {
+ /* Treat libc's ownership as a successful unregistration. */
return 0;
- signal_off_save(&oldset);
- if (!__rseq_refcount) {
- ret = -1;
- goto end;
}
- if (--__rseq_refcount)
- goto end;
- rc = sys_rseq(&__rseq_abi, sizeof(struct rseq_abi),
- RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG);
- if (!rc)
- goto end;
- __rseq_refcount = 1;
- ret = -1;
-end:
- signal_restore(oldset);
- return ret;
+ rc = sys_rseq(&__rseq_abi, sizeof(struct rseq_abi), RSEQ_ABI_FLAG_UNREGISTER, RSEQ_SIG);
+ if (rc)
+ return -1;
+ return 0;
+}
+
+static __attribute__((constructor))
+void rseq_init(void)
+{
+ libc_rseq_offset_p = dlsym(RTLD_NEXT, "__rseq_offset");
+ libc_rseq_size_p = dlsym(RTLD_NEXT, "__rseq_size");
+ libc_rseq_flags_p = dlsym(RTLD_NEXT, "__rseq_flags");
+ if (libc_rseq_size_p && libc_rseq_offset_p && libc_rseq_flags_p) {
+ /* rseq registration owned by glibc */
+ rseq_offset = *libc_rseq_offset_p;
+ rseq_size = *libc_rseq_size_p;
+ rseq_flags = *libc_rseq_flags_p;
+ return;
+ }
+ if (!rseq_available())
+ return;
+ rseq_ownership = 1;
+ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer();
+ rseq_size = sizeof(struct rseq_abi);
+ rseq_flags = 0;
+}
+
+static __attribute__((destructor))
+void rseq_exit(void)
+{
+ if (!rseq_ownership)
+ return;
+ rseq_offset = 0;
+ rseq_size = -1U;
+ rseq_ownership = 0;
}
int32_t rseq_fallback_current_cpu(void)
@@ -136,20 +146,3 @@ int32_t rseq_fallback_current_cpu(void)
}
return cpu;
}
-
-void __attribute__((constructor)) rseq_init(void)
-{
- /* Check whether rseq is handled by another library. */
- if (__rseq_handled)
- return;
- __rseq_handled = 1;
- rseq_ownership = 1;
-}
-
-void __attribute__((destructor)) rseq_fini(void)
-{
- if (!rseq_ownership)
- return;
- __rseq_handled = 0;
- rseq_ownership = 0;
-}
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -43,12 +43,19 @@
#define RSEQ_INJECT_FAILED
#endif
-extern __thread struct rseq_abi __rseq_abi;
-extern int __rseq_handled;
+#include "rseq-thread-pointer.h"
+
+/* Offset from the thread pointer to the rseq area. */
+extern int rseq_offset;
+/* Size of the registered rseq area. 0 if the registration was
+ unsuccessful. */
+extern unsigned int rseq_size;
+/* Flags used during rseq registration. */
+extern unsigned int rseq_flags;
static inline struct rseq_abi *rseq_get_abi(void)
{
- return &__rseq_abi;
+ return (struct rseq_abi *) ((uintptr_t) rseq_thread_pointer() + rseq_offset);
}
#define rseq_likely(x) __builtin_expect(!!(x), 1)
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 67/84] selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (65 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 66/84] selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35 Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 68/84] selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store Greg Kroah-Hartman
` (22 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 24d1136a29da5953de5c0cbc6c83eb62a1e0bf14 upstream.
ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by
using the rseq_cs.arch.ptr field.
Use this field across all architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-9-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-arm.h | 16 ++++++++--------
tools/testing/selftests/rseq/rseq-arm64.h | 16 ++++++++--------
tools/testing/selftests/rseq/rseq-mips.h | 16 ++++++++--------
tools/testing/selftests/rseq/rseq-ppc.h | 16 ++++++++--------
tools/testing/selftests/rseq/rseq-s390.h | 12 ++++++------
5 files changed, 38 insertions(+), 38 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -186,7 +186,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -256,7 +256,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -317,7 +317,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[count] "Ir" (count)
RSEQ_INJECT_INPUT
@@ -382,7 +382,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -458,7 +458,7 @@ int rseq_cmpeqv_trystorev_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -538,7 +538,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -658,7 +658,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -783,7 +783,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-arm64.h
+++ b/tools/testing/selftests/rseq/rseq-arm64.h
@@ -231,7 +231,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "Qo" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -288,7 +288,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "Qo" (*v),
[expectnot] "r" (expectnot),
[load] "Qo" (*load),
@@ -338,7 +338,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "Qo" (*v),
[count] "r" (count)
RSEQ_INJECT_INPUT
@@ -389,7 +389,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -448,7 +448,7 @@ int rseq_cmpeqv_trystorev_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -509,7 +509,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "Qo" (*v),
[expect] "r" (expect),
[v2] "Qo" (*v2),
@@ -570,7 +570,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
@@ -630,7 +630,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "Qo" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[expect] "r" (expect),
[v] "Qo" (*v),
[newv] "r" (newv),
--- a/tools/testing/selftests/rseq/rseq-mips.h
+++ b/tools/testing/selftests/rseq/rseq-mips.h
@@ -191,7 +191,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -259,7 +259,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -320,7 +320,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[count] "Ir" (count)
RSEQ_INJECT_INPUT
@@ -383,7 +383,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -457,7 +457,7 @@ int rseq_cmpeqv_trystorev_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -533,7 +533,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -650,7 +650,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -772,7 +772,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -236,7 +236,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -302,7 +302,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -360,7 +360,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -420,7 +420,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -490,7 +490,7 @@ int rseq_cmpeqv_trystorev_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -561,7 +561,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -636,7 +636,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
@@ -712,7 +712,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq-s390.h
+++ b/tools/testing/selftests/rseq/rseq-s390.h
@@ -166,7 +166,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -234,7 +234,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -289,7 +289,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[count] "r" (count)
@@ -348,7 +348,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -427,7 +427,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -535,7 +535,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
[current_cpu_id] "m" (rseq_get_abi()->cpu_id),
- [rseq_cs] "m" (rseq_get_abi()->rseq_cs),
+ [rseq_cs] "m" (rseq_get_abi()->rseq_cs.arch.ptr),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 68/84] selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (66 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 67/84] selftests/rseq: Fix ppc32: wrong rseq_cs 32-bit field pointer on big endian Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 69/84] selftests/rseq: Fix ppc32 offsets by using long rather than off_t Greg Kroah-Hartman
` (21 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit de6b52a21420a18dc8a36438d581efd1313d5fe3 upstream.
Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:
/tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:118: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:121: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:626: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:629: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:735: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:738: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:741: Error: junk at end of line: `,8'
Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of
the use of the "m" operand in powerpc kernel code, add the missing
%Un%Xn (where n is operand number) to the lwz, stw, ld, and std
instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on
the architecture is misleading. The term "WORD" really means a
32-bit type in both 32-bit and 64-bit powerpc assembler. The intent
here is to wrap load/store to intptr_t into common macros for both
32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT"
for always 32-bit type, and "LONG" for architecture bitness-sized
type.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-ppc.h | 55 ++++++++++++++++----------------
1 file changed, 28 insertions(+), 27 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -47,10 +47,13 @@ do { \
#ifdef __PPC64__
-#define STORE_WORD "std "
-#define LOAD_WORD "ld "
-#define LOADX_WORD "ldx "
-#define CMP_WORD "cmpd "
+#define RSEQ_STORE_LONG(arg) "std%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_STORE_INT(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_LOAD_LONG(arg) "ld%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOAD_INT(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOADX_LONG "ldx " /* From base register ("b" constraint) */
+#define RSEQ_CMP_LONG "cmpd "
+#define RSEQ_CMP_LONG_INT "cmpdi "
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
@@ -89,10 +92,13 @@ do { \
#else /* #ifdef __PPC64__ */
-#define STORE_WORD "stw "
-#define LOAD_WORD "lwz "
-#define LOADX_WORD "lwzx "
-#define CMP_WORD "cmpw "
+#define RSEQ_STORE_LONG(arg) "stw%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* To memory ("m" constraint) */
+#define RSEQ_STORE_INT(arg) RSEQ_STORE_LONG(arg) /* To memory ("m" constraint) */
+#define RSEQ_LOAD_LONG(arg) "lwz%U[" __rseq_str(arg) "]%X[" __rseq_str(arg) "] " /* From memory ("m" constraint) */
+#define RSEQ_LOAD_INT(arg) RSEQ_LOAD_LONG(arg) /* From memory ("m" constraint) */
+#define RSEQ_LOADX_LONG "lwzx " /* From base register ("b" constraint) */
+#define RSEQ_CMP_LONG "cmpw "
+#define RSEQ_CMP_LONG_INT "cmpwi "
#define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, \
start_ip, post_commit_offset, abort_ip) \
@@ -125,7 +131,7 @@ do { \
RSEQ_INJECT_ASM(1) \
"lis %%r17, (" __rseq_str(cs_label) ")@ha\n\t" \
"addi %%r17, %%r17, (" __rseq_str(cs_label) ")@l\n\t" \
- "stw %%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
+ RSEQ_STORE_INT(rseq_cs) "%%r17, %[" __rseq_str(rseq_cs) "]\n\t" \
__rseq_str(label) ":\n\t"
#endif /* #ifdef __PPC64__ */
@@ -136,7 +142,7 @@ do { \
#define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
RSEQ_INJECT_ASM(2) \
- "lwz %%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \
+ RSEQ_LOAD_INT(current_cpu_id) "%%r17, %[" __rseq_str(current_cpu_id) "]\n\t" \
"cmpw cr7, %[" __rseq_str(cpu_id) "], %%r17\n\t" \
"bne- cr7, " __rseq_str(label) "\n\t"
@@ -153,25 +159,25 @@ do { \
* RSEQ_ASM_OP_* (else): doesn't have hard-code registers(unless cr7)
*/
#define RSEQ_ASM_OP_CMPEQ(var, expect, label) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
- CMP_WORD "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expect) "]\n\t" \
"bne- cr7, " __rseq_str(label) "\n\t"
#define RSEQ_ASM_OP_CMPNE(var, expectnot, label) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
- CMP_WORD "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_CMP_LONG "cr7, %%r17, %[" __rseq_str(expectnot) "]\n\t" \
"beq- cr7, " __rseq_str(label) "\n\t"
#define RSEQ_ASM_OP_STORE(value, var) \
- STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t"
+ RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t"
/* Load @var to r17 */
#define RSEQ_ASM_OP_R_LOAD(var) \
- LOAD_WORD "%%r17, %[" __rseq_str(var) "]\n\t"
+ RSEQ_LOAD_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"
/* Store r17 to @var */
#define RSEQ_ASM_OP_R_STORE(var) \
- STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t"
+ RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t"
/* Add @count to r17 */
#define RSEQ_ASM_OP_R_ADD(count) \
@@ -179,11 +185,11 @@ do { \
/* Load (r17 + voffp) to r17 */
#define RSEQ_ASM_OP_R_LOADX(voffp) \
- LOADX_WORD "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t"
+ RSEQ_LOADX_LONG "%%r17, %[" __rseq_str(voffp) "], %%r17\n\t"
/* TODO: implement a faster memcpy. */
#define RSEQ_ASM_OP_R_MEMCPY() \
- "cmpdi %%r19, 0\n\t" \
+ RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \
"beq 333f\n\t" \
"addi %%r20, %%r20, -1\n\t" \
"addi %%r21, %%r21, -1\n\t" \
@@ -191,16 +197,16 @@ do { \
"lbzu %%r18, 1(%%r20)\n\t" \
"stbu %%r18, 1(%%r21)\n\t" \
"addi %%r19, %%r19, -1\n\t" \
- "cmpdi %%r19, 0\n\t" \
+ RSEQ_CMP_LONG_INT "%%r19, 0\n\t" \
"bne 222b\n\t" \
"333:\n\t" \
#define RSEQ_ASM_OP_R_FINAL_STORE(var, post_commit_label) \
- STORE_WORD "%%r17, %[" __rseq_str(var) "]\n\t" \
+ RSEQ_STORE_LONG(var) "%%r17, %[" __rseq_str(var) "]\n\t" \
__rseq_str(post_commit_label) ":\n\t"
#define RSEQ_ASM_OP_FINAL_STORE(value, var, post_commit_label) \
- STORE_WORD "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \
+ RSEQ_STORE_LONG(var) "%[" __rseq_str(value) "], %[" __rseq_str(var) "]\n\t" \
__rseq_str(post_commit_label) ":\n\t"
static inline __attribute__((always_inline))
@@ -743,9 +749,4 @@ error2:
#endif
}
-#undef STORE_WORD
-#undef LOAD_WORD
-#undef LOADX_WORD
-#undef CMP_WORD
-
#endif /* !RSEQ_SKIP_FASTPATH */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 69/84] selftests/rseq: Fix ppc32 offsets by using long rather than off_t
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (67 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 68/84] selftests/rseq: Fix ppc32 missing instruction selection "u" and "x" for load/store Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 70/84] selftests/rseq: Fix warnings about #if checks of undefined tokens Greg Kroah-Hartman
` (20 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 26dc8a6d8e11552f3b797b5aafe01071ca32d692 upstream.
The semantic of off_t is for file offsets. We mean to use it as an
offset from a pointer. We really expect it to fit in a single register,
and not use a 64-bit type on 32-bit architectures.
Fix runtime issues on ppc32 where the offset is always 0 due to
inconsistency between the argument type (off_t -> 64-bit) and type
expected by the inline assembler (32-bit).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-11-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/basic_percpu_ops_test.c | 2 +-
tools/testing/selftests/rseq/param_test.c | 2 +-
tools/testing/selftests/rseq/rseq-arm.h | 2 +-
tools/testing/selftests/rseq/rseq-arm64.h | 2 +-
tools/testing/selftests/rseq/rseq-mips.h | 2 +-
tools/testing/selftests/rseq/rseq-ppc.h | 2 +-
tools/testing/selftests/rseq/rseq-s390.h | 2 +-
tools/testing/selftests/rseq/rseq-skip.h | 2 +-
tools/testing/selftests/rseq/rseq-x86.h | 6 +++---
9 files changed, 11 insertions(+), 11 deletions(-)
--- a/tools/testing/selftests/rseq/basic_percpu_ops_test.c
+++ b/tools/testing/selftests/rseq/basic_percpu_ops_test.c
@@ -167,7 +167,7 @@ struct percpu_list_node *this_cpu_list_p
for (;;) {
struct percpu_list_node *head;
intptr_t *targetptr, expectnot, *load;
- off_t offset;
+ long offset;
int ret, cpu;
cpu = rseq_cpu_start();
--- a/tools/testing/selftests/rseq/param_test.c
+++ b/tools/testing/selftests/rseq/param_test.c
@@ -549,7 +549,7 @@ struct percpu_list_node *this_cpu_list_p
for (;;) {
struct percpu_list_node *head;
intptr_t *targetptr, expectnot, *load;
- off_t offset;
+ long offset;
int ret;
cpu = rseq_cpu_start();
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -217,7 +217,7 @@ error2:
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
--- a/tools/testing/selftests/rseq/rseq-arm64.h
+++ b/tools/testing/selftests/rseq/rseq-arm64.h
@@ -259,7 +259,7 @@ error2:
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
--- a/tools/testing/selftests/rseq/rseq-mips.h
+++ b/tools/testing/selftests/rseq/rseq-mips.h
@@ -222,7 +222,7 @@ error2:
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -270,7 +270,7 @@ error2:
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
--- a/tools/testing/selftests/rseq/rseq-s390.h
+++ b/tools/testing/selftests/rseq/rseq-s390.h
@@ -198,7 +198,7 @@ error2:
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
--- a/tools/testing/selftests/rseq/rseq-skip.h
+++ b/tools/testing/selftests/rseq/rseq-skip.h
@@ -13,7 +13,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
return -1;
}
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -172,7 +172,7 @@ error2:
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
@@ -286,7 +286,7 @@ error1:
* *pval += inc;
*/
static inline __attribute__((always_inline))
-int rseq_offset_deref_addv(intptr_t *ptr, off_t off, intptr_t inc, int cpu)
+int rseq_offset_deref_addv(intptr_t *ptr, long off, intptr_t inc, int cpu)
{
RSEQ_INJECT_C(9)
@@ -750,7 +750,7 @@ error2:
*/
static inline __attribute__((always_inline))
int rseq_cmpnev_storeoffp_load(intptr_t *v, intptr_t expectnot,
- off_t voffp, intptr_t *load, int cpu)
+ long voffp, intptr_t *load, int cpu)
{
RSEQ_INJECT_C(9)
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 70/84] selftests/rseq: Fix warnings about #if checks of undefined tokens
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (68 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 69/84] selftests/rseq: Fix ppc32 offsets by using long rather than off_t Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 71/84] selftests/rseq: Remove arm/mips asm goto compiler work-around Greg Kroah-Hartman
` (19 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit d7ed99ade3e62b755584eea07b4e499e79240527 upstream.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-12-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/param_test.c | 2 +-
tools/testing/selftests/rseq/rseq-x86.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/rseq/param_test.c
+++ b/tools/testing/selftests/rseq/param_test.c
@@ -161,7 +161,7 @@ unsigned int yield_mod_cnt, nr_abort;
" cbnz " INJECT_ASM_REG ", 222b\n" \
"333:\n"
-#elif __PPC__
+#elif defined(__PPC__)
#define RSEQ_INJECT_INPUT \
, [loop_cnt_1]"m"(loop_cnt[1]) \
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -600,7 +600,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
#endif /* !RSEQ_SKIP_FASTPATH */
-#elif __i386__
+#elif defined(__i386__)
#define rseq_smp_mb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 71/84] selftests/rseq: Remove arm/mips asm goto compiler work-around
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (69 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 70/84] selftests/rseq: Fix warnings about #if checks of undefined tokens Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 72/84] selftests/rseq: Fix: work-around asm goto compiler bugs Greg Kroah-Hartman
` (18 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 94c5cf2a0e193afffef8de48ddc42de6df7cac93 upstream.
The arm and mips work-around for asm goto size guess issues are not
properly documented, and lack reference to specific compiler versions,
upstream compiler bug tracker entry, and reproducer.
I can only find a loosely documented patch in my original LKML rseq post
refering to gcc < 7 on ARM, but it does not appear to be sufficient to
track the exact issue. Also, I am not sure MIPS really has the same
limitation.
Therefore, remove the work-around until we can properly document this.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20171121141900.18471-17-mathieu.desnoyers@efficios.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-arm.h | 37 -------------------------------
tools/testing/selftests/rseq/rseq-mips.h | 37 -------------------------------
2 files changed, 74 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -147,14 +147,11 @@ do { \
teardown \
"b %l[" __rseq_str(cmpfail_label) "]\n\t"
-#define rseq_workaround_gcc_asm_size_guess() __asm__ __volatile__("")
-
static inline __attribute__((always_inline))
int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -198,14 +195,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -221,7 +215,6 @@ int rseq_cmpnev_storeoffp_load(intptr_t
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -270,14 +263,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -292,7 +282,6 @@ int rseq_addv(intptr_t *v, intptr_t coun
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
#ifdef RSEQ_COMPARE_TWICE
@@ -328,10 +317,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
@@ -347,7 +334,6 @@ int rseq_cmpeqv_trystorev_storev(intptr_
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -398,14 +384,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -422,7 +405,6 @@ int rseq_cmpeqv_trystorev_storev_release
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -474,14 +456,11 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -498,7 +477,6 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -554,14 +532,11 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -582,7 +557,6 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -678,21 +652,16 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("cpu_id comparison failed");
error2:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("expected value comparison failed");
#endif
}
@@ -706,7 +675,6 @@ int rseq_cmpeqv_trymemcpy_storev_release
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -803,21 +771,16 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("cpu_id comparison failed");
error2:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq-mips.h
+++ b/tools/testing/selftests/rseq/rseq-mips.h
@@ -154,14 +154,11 @@ do { \
teardown \
"b %l[" __rseq_str(cmpfail_label) "]\n\t"
-#define rseq_workaround_gcc_asm_size_guess() __asm__ __volatile__("")
-
static inline __attribute__((always_inline))
int rseq_cmpeqv_storev(intptr_t *v, intptr_t expect, intptr_t newv, int cpu)
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -203,14 +200,11 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -226,7 +220,6 @@ int rseq_cmpnev_storeoffp_load(intptr_t
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -273,14 +266,11 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -295,7 +285,6 @@ int rseq_addv(intptr_t *v, intptr_t coun
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
#ifdef RSEQ_COMPARE_TWICE
@@ -331,10 +320,8 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
@@ -350,7 +337,6 @@ int rseq_cmpeqv_trystorev_storev(intptr_
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -399,14 +385,11 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -423,7 +406,6 @@ int rseq_cmpeqv_trystorev_storev_release
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -473,14 +455,11 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -497,7 +476,6 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
{
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -549,14 +527,11 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
@@ -577,7 +552,6 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -670,21 +644,16 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("cpu_id comparison failed");
error2:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("expected value comparison failed");
#endif
}
@@ -698,7 +667,6 @@ int rseq_cmpeqv_trymemcpy_storev_release
RSEQ_INJECT_C(9)
- rseq_workaround_gcc_asm_size_guess();
__asm__ __volatile__ goto (
RSEQ_ASM_DEFINE_TABLE(9, 1f, 2f, 4f) /* start, commit, abort */
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[cmpfail])
@@ -792,21 +760,16 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
- rseq_workaround_gcc_asm_size_guess();
return 0;
abort:
- rseq_workaround_gcc_asm_size_guess();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
- rseq_workaround_gcc_asm_size_guess();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("cpu_id comparison failed");
error2:
- rseq_workaround_gcc_asm_size_guess();
rseq_bug("expected value comparison failed");
#endif
}
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 72/84] selftests/rseq: Fix: work-around asm goto compiler bugs
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (70 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 71/84] selftests/rseq: Remove arm/mips asm goto compiler work-around Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 73/84] selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area Greg Kroah-Hartman
` (17 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit b53823fb2ef854222853be164f3b1e815f315144 upstream.
gcc and clang each have their own compiler bugs with respect to asm
goto. Implement a work-around for compiler versions known to have those
bugs.
gcc prior to 4.8.2 miscompiles asm goto.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
gcc prior to 8.1.0 miscompiles asm goto at O1.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908
clang prior to version 13.0.1 miscompiles asm goto at O2.
https://github.com/llvm/llvm-project/issues/52735
Work around these issues by adding a volatile inline asm with
memory clobber in the fallthrough after the asm goto and at each
label target. Emit this for all compilers in case other similar
issues are found in the future.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-14-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/compiler.h | 30 +++++++++++++
tools/testing/selftests/rseq/rseq-arm.h | 39 +++++++++++++++++
tools/testing/selftests/rseq/rseq-arm64.h | 45 +++++++++++++++++--
tools/testing/selftests/rseq/rseq-ppc.h | 39 +++++++++++++++++
tools/testing/selftests/rseq/rseq-s390.h | 29 ++++++++++++
tools/testing/selftests/rseq/rseq-x86.h | 68 ++++++++++++++++++++++++++++++
tools/testing/selftests/rseq/rseq.h | 1
7 files changed, 245 insertions(+), 6 deletions(-)
create mode 100644 tools/testing/selftests/rseq/compiler.h
--- /dev/null
+++ b/tools/testing/selftests/rseq/compiler.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: LGPL-2.1-only OR MIT */
+/*
+ * rseq/compiler.h
+ *
+ * Work-around asm goto compiler bugs.
+ *
+ * (C) Copyright 2021 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#ifndef RSEQ_COMPILER_H
+#define RSEQ_COMPILER_H
+
+/*
+ * gcc prior to 4.8.2 miscompiles asm goto.
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
+ *
+ * gcc prior to 8.1.0 miscompiles asm goto at O1.
+ * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908
+ *
+ * clang prior to version 13.0.1 miscompiles asm goto at O2.
+ * https://github.com/llvm/llvm-project/issues/52735
+ *
+ * Work around these issues by adding a volatile inline asm with
+ * memory clobber in the fallthrough after the asm goto and at each
+ * label target. Emit this for all compilers in case other similar
+ * issues are found in the future.
+ */
+#define rseq_after_asm_goto() asm volatile ("" : : : "memory")
+
+#endif /* RSEQ_COMPILER_H_ */
--- a/tools/testing/selftests/rseq/rseq-arm.h
+++ b/tools/testing/selftests/rseq/rseq-arm.h
@@ -195,16 +195,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -263,16 +268,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -317,12 +327,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -384,16 +397,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -456,16 +474,21 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -532,18 +555,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -652,16 +681,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -771,16 +805,21 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq-arm64.h
+++ b/tools/testing/selftests/rseq/rseq-arm64.h
@@ -242,17 +242,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -300,16 +304,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -348,12 +357,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -402,17 +414,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -461,17 +477,21 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -522,19 +542,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -584,17 +609,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -644,17 +673,21 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
-
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq-ppc.h
+++ b/tools/testing/selftests/rseq/rseq-ppc.h
@@ -254,16 +254,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -322,16 +327,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -378,12 +388,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -442,16 +455,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -512,16 +530,21 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -583,18 +606,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -659,16 +688,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -735,16 +769,21 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq-s390.h
+++ b/tools/testing/selftests/rseq/rseq-s390.h
@@ -178,16 +178,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -248,16 +253,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -301,12 +311,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -364,16 +377,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -443,18 +461,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -555,16 +579,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -152,16 +152,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -220,16 +225,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -269,12 +279,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -387,16 +400,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -464,18 +482,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -574,16 +598,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -730,16 +759,21 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -798,16 +832,21 @@ int rseq_cmpnev_storeoffp_load(intptr_t
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -847,12 +886,15 @@ int rseq_addv(intptr_t *v, intptr_t coun
, error1
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
#endif
}
@@ -909,16 +951,21 @@ int rseq_cmpeqv_trystorev_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -977,16 +1024,21 @@ int rseq_cmpeqv_trystorev_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
@@ -1047,18 +1099,24 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
, error1, error2, error3
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("1st expected value comparison failed");
error3:
+ rseq_after_asm_goto();
rseq_bug("2nd expected value comparison failed");
#endif
}
@@ -1161,16 +1219,21 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
@@ -1274,16 +1337,21 @@ int rseq_cmpeqv_trymemcpy_storev_release
, error1, error2
#endif
);
+ rseq_after_asm_goto();
return 0;
abort:
+ rseq_after_asm_goto();
RSEQ_INJECT_FAILED
return -1;
cmpfail:
+ rseq_after_asm_goto();
return 1;
#ifdef RSEQ_COMPARE_TWICE
error1:
+ rseq_after_asm_goto();
rseq_bug("cpu_id comparison failed");
error2:
+ rseq_after_asm_goto();
rseq_bug("expected value comparison failed");
#endif
}
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -17,6 +17,7 @@
#include <stdio.h>
#include <stdlib.h>
#include "rseq-abi.h"
+#include "compiler.h"
/*
* Empty code injection macros, override when testing.
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 73/84] selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (71 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 72/84] selftests/rseq: Fix: work-around asm goto compiler bugs Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 74/84] selftests/rseq: x86-32: use %gs " Greg Kroah-Hartman
` (16 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 4e15bb766b6c6e963a4d33629034d0ec3b7637df upstream.
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %fs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-15-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-x86.h | 58 ++++++++++++++++----------------
1 file changed, 30 insertions(+), 28 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -28,6 +28,8 @@
#ifdef __x86_64__
+#define RSEQ_ASM_TP_SEGMENT %%fs
+
#define rseq_smp_mb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%rsp)" ::: "memory", "cc")
#define rseq_smp_rmb() rseq_barrier()
@@ -123,14 +125,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -141,7 +143,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -189,15 +191,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"movq %[v], %%rbx\n\t"
"cmpq %%rbx, %[expectnot]\n\t"
"je %l[error2]\n\t"
@@ -212,7 +214,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -255,11 +257,11 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
#endif
/* final store */
"addq %[count], %[v]\n\t"
@@ -268,7 +270,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* final store input */
[v] "m" (*v),
[count] "er" (count)
@@ -309,11 +311,11 @@ int rseq_offset_deref_addv(intptr_t *ptr
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
#endif
/* get p+v */
"movq %[ptr], %%rbx\n\t"
@@ -327,7 +329,7 @@ int rseq_offset_deref_addv(intptr_t *ptr
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* final store input */
[ptr] "m" (*ptr),
[off] "er" (off),
@@ -364,14 +366,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -385,7 +387,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -444,8 +446,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
@@ -454,7 +456,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpq %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpq %[v2], %[expect2]\n\t"
@@ -467,7 +469,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -524,14 +526,14 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
"movq %[dst], %[rseq_scratch1]\n\t"
"movq %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpq %[v], %[expect]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f)
"cmpq %[v], %[expect]\n\t"
"jnz 7f\n\t"
#endif
@@ -579,7 +581,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" ((long)rseq_offset),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 74/84] selftests/rseq: x86-32: use %gs segment selector for accessing rseq thread area
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (72 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 73/84] selftests/rseq: x86-64: use %fs segment selector for accessing rseq thread area Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 75/84] selftests/rseq: Change type of rseq_offset to ptrdiff_t Greg Kroah-Hartman
` (15 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 127b6429d235ab7c358223bbfd8a8b8d8cc799b6 upstream.
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %gs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-16-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-x86.h | 66 ++++++++++++++++----------------
1 file changed, 34 insertions(+), 32 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -633,6 +633,8 @@ int rseq_cmpeqv_trymemcpy_storev_release
#elif defined(__i386__)
+#define RSEQ_ASM_TP_SEGMENT %%gs
+
#define rseq_smp_mb() \
__asm__ __volatile__ ("lock; addl $0,-128(%%esp)" ::: "memory", "cc")
#define rseq_smp_rmb() \
@@ -732,14 +734,14 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -750,7 +752,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -798,15 +800,15 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"movl %[v], %%ebx\n\t"
"cmpl %%ebx, %[expectnot]\n\t"
"je %l[error2]\n\t"
@@ -821,7 +823,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -864,11 +866,11 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error1])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
#endif
/* final store */
"addl %[count], %[v]\n\t"
@@ -877,7 +879,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[count] "ir" (count)
@@ -916,14 +918,14 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
#endif
@@ -938,7 +940,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* try store input */
[v2] "m" (*v2),
[newv2] "m" (newv2),
@@ -987,15 +989,15 @@ int rseq_cmpeqv_trystorev_storev_release
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error2])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"movl %[expect], %%eax\n\t"
"cmpl %[v], %%eax\n\t"
"jnz %l[error2]\n\t"
@@ -1011,7 +1013,7 @@ int rseq_cmpeqv_trystorev_storev_release
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -1062,8 +1064,8 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_EXIT_POINT(1f, %l[error3])
#endif
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"cmpl %[v], %[expect]\n\t"
"jnz %l[cmpfail]\n\t"
@@ -1072,7 +1074,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
"jnz %l[cmpfail]\n\t"
RSEQ_INJECT_ASM(5)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), %l[error1])
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), %l[error1])
"cmpl %[v], %[expect]\n\t"
"jnz %l[error2]\n\t"
"cmpl %[expect2], %[v2]\n\t"
@@ -1086,7 +1088,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -1144,15 +1146,15 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
@@ -1202,7 +1204,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
@@ -1261,15 +1263,15 @@ int rseq_cmpeqv_trymemcpy_storev_release
"movl %[dst], %[rseq_scratch1]\n\t"
"movl %[len], %[rseq_scratch2]\n\t"
/* Start rseq by storing table entry pointer into rseq_cs. */
- RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_CS_OFFSET(%[rseq_abi]))
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 4f)
+ RSEQ_ASM_STORE_RSEQ_CS(1, 3b, RSEQ_ASM_TP_SEGMENT:RSEQ_CS_OFFSET(%[rseq_offset]))
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 4f)
RSEQ_INJECT_ASM(3)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 5f\n\t"
RSEQ_INJECT_ASM(4)
#ifdef RSEQ_COMPARE_TWICE
- RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_CPU_ID_OFFSET(%[rseq_abi]), 6f)
+ RSEQ_ASM_CMP_CPU_ID(cpu_id, RSEQ_ASM_TP_SEGMENT:RSEQ_CPU_ID_OFFSET(%[rseq_offset]), 6f)
"movl %[expect], %%eax\n\t"
"cmpl %%eax, %[v]\n\t"
"jnz 7f\n\t"
@@ -1320,7 +1322,7 @@ int rseq_cmpeqv_trymemcpy_storev_release
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_abi] "r" (rseq_get_abi()),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[expect] "m" (expect),
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 75/84] selftests/rseq: Change type of rseq_offset to ptrdiff_t
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (73 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 74/84] selftests/rseq: x86-32: use %gs " Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 76/84] xen/blkfront: fix leaking data in shared pages Greg Kroah-Hartman
` (14 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
Peter Zijlstra (Intel)
From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
commit 889c5d60fbcf332c8b6ab7054d45f2768914a375 upstream.
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI
was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
tools/testing/selftests/rseq/rseq-x86.h | 14 +++++++-------
tools/testing/selftests/rseq/rseq.c | 5 +++--
tools/testing/selftests/rseq/rseq.h | 3 ++-
3 files changed, 12 insertions(+), 10 deletions(-)
--- a/tools/testing/selftests/rseq/rseq-x86.h
+++ b/tools/testing/selftests/rseq/rseq-x86.h
@@ -143,7 +143,7 @@ int rseq_cmpeqv_storev(intptr_t *v, intp
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
[v] "m" (*v),
[expect] "r" (expect),
[newv] "r" (newv)
@@ -214,7 +214,7 @@ int rseq_cmpnev_storeoffp_load(intptr_t
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[expectnot] "r" (expectnot),
@@ -270,7 +270,7 @@ int rseq_addv(intptr_t *v, intptr_t coun
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[count] "er" (count)
@@ -329,7 +329,7 @@ int rseq_offset_deref_addv(intptr_t *ptr
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[ptr] "m" (*ptr),
[off] "er" (off),
@@ -387,7 +387,7 @@ int rseq_cmpeqv_trystorev_storev(intptr_
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* try store input */
[v2] "m" (*v2),
[newv2] "r" (newv2),
@@ -469,7 +469,7 @@ int rseq_cmpeqv_cmpeqv_storev(intptr_t *
RSEQ_ASM_DEFINE_ABORT(4, "", abort)
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* cmp2 input */
[v2] "m" (*v2),
[expect2] "r" (expect2),
@@ -581,7 +581,7 @@ int rseq_cmpeqv_trymemcpy_storev(intptr_
#endif
: /* gcc asm goto does not allow outputs */
: [cpu_id] "r" (cpu),
- [rseq_offset] "r" ((long)rseq_offset),
+ [rseq_offset] "r" (rseq_offset),
/* final store input */
[v] "m" (*v),
[expect] "r" (expect),
--- a/tools/testing/selftests/rseq/rseq.c
+++ b/tools/testing/selftests/rseq/rseq.c
@@ -27,16 +27,17 @@
#include <signal.h>
#include <limits.h>
#include <dlfcn.h>
+#include <stddef.h>
#include "../kselftest.h"
#include "rseq.h"
-static const int *libc_rseq_offset_p;
+static const ptrdiff_t *libc_rseq_offset_p;
static const unsigned int *libc_rseq_size_p;
static const unsigned int *libc_rseq_flags_p;
/* Offset from the thread pointer to the rseq area. */
-int rseq_offset;
+ptrdiff_t rseq_offset;
/* Size of the registered rseq area. 0 if the registration was
unsuccessful. */
--- a/tools/testing/selftests/rseq/rseq.h
+++ b/tools/testing/selftests/rseq/rseq.h
@@ -16,6 +16,7 @@
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
+#include <stddef.h>
#include "rseq-abi.h"
#include "compiler.h"
@@ -47,7 +48,7 @@
#include "rseq-thread-pointer.h"
/* Offset from the thread pointer to the rseq area. */
-extern int rseq_offset;
+extern ptrdiff_t rseq_offset;
/* Size of the registered rseq area. 0 if the registration was
unsuccessful. */
extern unsigned int rseq_size;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 76/84] xen/blkfront: fix leaking data in shared pages
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (74 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 75/84] selftests/rseq: Change type of rseq_offset to ptrdiff_t Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 77/84] xen/netfront: " Greg Kroah-Hartman
` (13 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Pau Monné, Jan Beulich,
Juergen Gross
From: Roger Pau Monne <roger.pau@citrix.com>
commit 2f446ffe9d737e9a844b97887919c4fda18246e7 upstream.
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-26365, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -311,7 +311,7 @@ static int fill_grant_buffer(struct blkf
goto out_of_memory;
if (info->feature_persistent) {
- granted_page = alloc_page(GFP_NOIO);
+ granted_page = alloc_page(GFP_NOIO | __GFP_ZERO);
if (!granted_page) {
kfree(gnt_list_entry);
goto out_of_memory;
@@ -1753,7 +1753,7 @@ static int setup_blkring(struct xenbus_d
for (i = 0; i < info->nr_ring_pages; i++)
rinfo->ring_ref[i] = GRANT_INVALID_REF;
- sring = alloc_pages_exact(ring_size, GFP_NOIO);
+ sring = alloc_pages_exact(ring_size, GFP_NOIO | __GFP_ZERO);
if (!sring) {
xenbus_dev_fatal(dev, -ENOMEM, "allocating shared ring");
return -ENOMEM;
@@ -2293,7 +2293,8 @@ static int blkfront_setup_indirect(struc
BUG_ON(!list_empty(&rinfo->indirect_pages));
for (i = 0; i < num; i++) {
- struct page *indirect_page = alloc_page(GFP_KERNEL);
+ struct page *indirect_page = alloc_page(GFP_KERNEL |
+ __GFP_ZERO);
if (!indirect_page)
goto out_of_memory;
list_add(&indirect_page->lru, &rinfo->indirect_pages);
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 77/84] xen/netfront: fix leaking data in shared pages
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (75 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 76/84] xen/blkfront: fix leaking data in shared pages Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 78/84] xen/netfront: force data bouncing when backend is untrusted Greg Kroah-Hartman
` (12 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Pau Monné, Jan Beulich,
Juergen Gross
From: Roger Pau Monne <roger.pau@citrix.com>
commit 307c8de2b02344805ebead3440d8feed28f2f010 upstream.
When allocating pages to be used for shared communication with the
backend always zero them, this avoids leaking unintended data present
on the pages.
This is CVE-2022-33740, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -273,7 +273,8 @@ static struct sk_buff *xennet_alloc_one_
if (unlikely(!skb))
return NULL;
- page = page_pool_dev_alloc_pages(queue->page_pool);
+ page = page_pool_alloc_pages(queue->page_pool,
+ GFP_ATOMIC | __GFP_NOWARN | __GFP_ZERO);
if (unlikely(!page)) {
kfree_skb(skb);
return NULL;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 78/84] xen/netfront: force data bouncing when backend is untrusted
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (76 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 77/84] xen/netfront: " Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 79/84] xen/blkfront: " Greg Kroah-Hartman
` (11 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Pau Monné, Juergen Gross
From: Roger Pau Monne <roger.pau@citrix.com>
commit 4491001c2e0fa69efbb748c96ec96b100a5cdb7e upstream.
Bounce all data on the skbs to be transmitted into zeroed pages if the
backend is untrusted. This avoids leaking data present in the pages
shared with the backend but not part of the skb fragments. This
requires introducing a new helper in order to allocate skbs with a
size multiple of XEN_PAGE_SIZE so we don't leak contiguous data on the
granted pages.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33741, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 49 +++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 47 insertions(+), 2 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -66,6 +66,10 @@ module_param_named(max_queues, xennet_ma
MODULE_PARM_DESC(max_queues,
"Maximum number of queues per virtual interface");
+static bool __read_mostly xennet_trusted = true;
+module_param_named(trusted, xennet_trusted, bool, 0644);
+MODULE_PARM_DESC(trusted, "Is the backend trusted");
+
#define XENNET_TIMEOUT (5 * HZ)
static const struct ethtool_ops xennet_ethtool_ops;
@@ -175,6 +179,9 @@ struct netfront_info {
/* Is device behaving sane? */
bool broken;
+ /* Should skbs be bounced into a zeroed buffer? */
+ bool bounce;
+
atomic_t rx_gso_checksum_fixup;
};
@@ -670,6 +677,33 @@ static int xennet_xdp_xmit(struct net_de
return n - drops;
}
+struct sk_buff *bounce_skb(const struct sk_buff *skb)
+{
+ unsigned int headerlen = skb_headroom(skb);
+ /* Align size to allocate full pages and avoid contiguous data leaks */
+ unsigned int size = ALIGN(skb_end_offset(skb) + skb->data_len,
+ XEN_PAGE_SIZE);
+ struct sk_buff *n = alloc_skb(size, GFP_ATOMIC | __GFP_ZERO);
+
+ if (!n)
+ return NULL;
+
+ if (!IS_ALIGNED((uintptr_t)n->head, XEN_PAGE_SIZE)) {
+ WARN_ONCE(1, "misaligned skb allocated\n");
+ kfree_skb(n);
+ return NULL;
+ }
+
+ /* Set the data pointer */
+ skb_reserve(n, headerlen);
+ /* Set the tail pointer and length */
+ skb_put(n, skb->len);
+
+ BUG_ON(skb_copy_bits(skb, -headerlen, n->head, headerlen + skb->len));
+
+ skb_copy_header(n, skb);
+ return n;
+}
#define MAX_XEN_SKB_FRAGS (65536 / XEN_PAGE_SIZE + 1)
@@ -723,9 +757,13 @@ static netdev_tx_t xennet_start_xmit(str
/* The first req should be at least ETH_HLEN size or the packet will be
* dropped by netback.
+ *
+ * If the backend is not trusted bounce all data to zeroed pages to
+ * avoid exposing contiguous data on the granted page not belonging to
+ * the skb.
*/
- if (unlikely(PAGE_SIZE - offset < ETH_HLEN)) {
- nskb = skb_copy(skb, GFP_ATOMIC);
+ if (np->bounce || unlikely(PAGE_SIZE - offset < ETH_HLEN)) {
+ nskb = bounce_skb(skb);
if (!nskb)
goto drop;
dev_consume_skb_any(skb);
@@ -2249,6 +2287,10 @@ static int talk_to_netback(struct xenbus
info->netdev->irq = 0;
+ /* Check if backend is trusted. */
+ info->bounce = !xennet_trusted ||
+ !xenbus_read_unsigned(dev->nodename, "trusted", 1);
+
/* Check if backend supports multiple queues */
max_queues = xenbus_read_unsigned(info->xbdev->otherend,
"multi-queue-max-queues", 1);
@@ -2415,6 +2457,9 @@ static int xennet_connect(struct net_dev
return err;
if (np->netback_has_xdp_headroom)
pr_info("backend supports XDP headroom\n");
+ if (np->bounce)
+ dev_info(&np->xbdev->dev,
+ "bouncing transmitted data to zeroed pages\n");
/* talk_to_netback() sets the correct number of queues */
num_queues = dev->real_num_tx_queues;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 79/84] xen/blkfront: force data bouncing when backend is untrusted
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (77 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 78/84] xen/netfront: force data bouncing when backend is untrusted Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 80/84] xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses() Greg Kroah-Hartman
` (10 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Roger Pau Monné, Juergen Gross
From: Roger Pau Monne <roger.pau@citrix.com>
commit 2400617da7eebf9167d71a46122828bc479d64c9 upstream.
Split the current bounce buffering logic used with persistent grants
into it's own option, and allow enabling it independently of
persistent grants. This allows to reuse the same code paths to
perform the bounce buffering required to avoid leaking contiguous data
in shared pages not part of the request fragments.
Reporting whether the backend is to be trusted can be done using a
module parameter, or from the xenstore frontend path as set by the
toolstack when adding the device.
This is CVE-2022-33742, part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/block/xen-blkfront.c | 49 +++++++++++++++++++++++++++++--------------
1 file changed, 34 insertions(+), 15 deletions(-)
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -151,6 +151,10 @@ static unsigned int xen_blkif_max_ring_o
module_param_named(max_ring_page_order, xen_blkif_max_ring_order, int, 0444);
MODULE_PARM_DESC(max_ring_page_order, "Maximum order of pages to be used for the shared ring");
+static bool __read_mostly xen_blkif_trusted = true;
+module_param_named(trusted, xen_blkif_trusted, bool, 0644);
+MODULE_PARM_DESC(trusted, "Is the backend trusted");
+
#define BLK_RING_SIZE(info) \
__CONST_RING_SIZE(blkif, XEN_PAGE_SIZE * (info)->nr_ring_pages)
@@ -208,6 +212,7 @@ struct blkfront_info
unsigned int feature_discard:1;
unsigned int feature_secdiscard:1;
unsigned int feature_persistent:1;
+ unsigned int bounce:1;
unsigned int discard_granularity;
unsigned int discard_alignment;
/* Number of 4KB segments handled */
@@ -310,7 +315,7 @@ static int fill_grant_buffer(struct blkf
if (!gnt_list_entry)
goto out_of_memory;
- if (info->feature_persistent) {
+ if (info->bounce) {
granted_page = alloc_page(GFP_NOIO | __GFP_ZERO);
if (!granted_page) {
kfree(gnt_list_entry);
@@ -330,7 +335,7 @@ out_of_memory:
list_for_each_entry_safe(gnt_list_entry, n,
&rinfo->grants, node) {
list_del(&gnt_list_entry->node);
- if (info->feature_persistent)
+ if (info->bounce)
__free_page(gnt_list_entry->page);
kfree(gnt_list_entry);
i--;
@@ -376,7 +381,7 @@ static struct grant *get_grant(grant_ref
/* Assign a gref to this page */
gnt_list_entry->gref = gnttab_claim_grant_reference(gref_head);
BUG_ON(gnt_list_entry->gref == -ENOSPC);
- if (info->feature_persistent)
+ if (info->bounce)
grant_foreign_access(gnt_list_entry, info);
else {
/* Grant access to the GFN passed by the caller */
@@ -400,7 +405,7 @@ static struct grant *get_indirect_grant(
/* Assign a gref to this page */
gnt_list_entry->gref = gnttab_claim_grant_reference(gref_head);
BUG_ON(gnt_list_entry->gref == -ENOSPC);
- if (!info->feature_persistent) {
+ if (!info->bounce) {
struct page *indirect_page;
/* Fetch a pre-allocated page to use for indirect grefs */
@@ -715,7 +720,7 @@ static int blkif_queue_rw_req(struct req
.grant_idx = 0,
.segments = NULL,
.rinfo = rinfo,
- .need_copy = rq_data_dir(req) && info->feature_persistent,
+ .need_copy = rq_data_dir(req) && info->bounce,
};
/*
@@ -1035,11 +1040,12 @@ static void xlvbd_flush(struct blkfront_
{
blk_queue_write_cache(info->rq, info->feature_flush ? true : false,
info->feature_fua ? true : false);
- pr_info("blkfront: %s: %s %s %s %s %s\n",
+ pr_info("blkfront: %s: %s %s %s %s %s %s %s\n",
info->gd->disk_name, flush_info(info),
"persistent grants:", info->feature_persistent ?
"enabled;" : "disabled;", "indirect descriptors:",
- info->max_indirect_segments ? "enabled;" : "disabled;");
+ info->max_indirect_segments ? "enabled;" : "disabled;",
+ "bounce buffer:", info->bounce ? "enabled" : "disabled;");
}
static int xen_translate_vdev(int vdevice, int *minor, unsigned int *offset)
@@ -1273,7 +1279,7 @@ static void blkif_free_ring(struct blkfr
if (!list_empty(&rinfo->indirect_pages)) {
struct page *indirect_page, *n;
- BUG_ON(info->feature_persistent);
+ BUG_ON(info->bounce);
list_for_each_entry_safe(indirect_page, n, &rinfo->indirect_pages, lru) {
list_del(&indirect_page->lru);
__free_page(indirect_page);
@@ -1290,7 +1296,7 @@ static void blkif_free_ring(struct blkfr
0, 0UL);
rinfo->persistent_gnts_c--;
}
- if (info->feature_persistent)
+ if (info->bounce)
__free_page(persistent_gnt->page);
kfree(persistent_gnt);
}
@@ -1311,7 +1317,7 @@ static void blkif_free_ring(struct blkfr
for (j = 0; j < segs; j++) {
persistent_gnt = rinfo->shadow[i].grants_used[j];
gnttab_end_foreign_access(persistent_gnt->gref, 0, 0UL);
- if (info->feature_persistent)
+ if (info->bounce)
__free_page(persistent_gnt->page);
kfree(persistent_gnt);
}
@@ -1501,7 +1507,7 @@ static int blkif_completion(unsigned lon
data.s = s;
num_sg = s->num_sg;
- if (bret->operation == BLKIF_OP_READ && info->feature_persistent) {
+ if (bret->operation == BLKIF_OP_READ && info->bounce) {
for_each_sg(s->sg, sg, num_sg, i) {
BUG_ON(sg->offset + sg->length > PAGE_SIZE);
@@ -1560,7 +1566,7 @@ static int blkif_completion(unsigned lon
* Add the used indirect page back to the list of
* available pages for indirect grefs.
*/
- if (!info->feature_persistent) {
+ if (!info->bounce) {
indirect_page = s->indirect_grants[i]->page;
list_add(&indirect_page->lru, &rinfo->indirect_pages);
}
@@ -1857,6 +1863,10 @@ static int talk_to_blkback(struct xenbus
if (!info)
return -ENODEV;
+ /* Check if backend is trusted. */
+ info->bounce = !xen_blkif_trusted ||
+ !xenbus_read_unsigned(dev->nodename, "trusted", 1);
+
max_page_order = xenbus_read_unsigned(info->xbdev->otherend,
"max-ring-page-order", 0);
ring_page_order = min(xen_blkif_max_ring_order, max_page_order);
@@ -2283,10 +2293,10 @@ static int blkfront_setup_indirect(struc
if (err)
goto out_of_memory;
- if (!info->feature_persistent && info->max_indirect_segments) {
+ if (!info->bounce && info->max_indirect_segments) {
/*
- * We are using indirect descriptors but not persistent
- * grants, we need to allocate a set of pages that can be
+ * We are using indirect descriptors but don't have a bounce
+ * buffer, we need to allocate a set of pages that can be
* used for mapping indirect grefs
*/
int num = INDIRECT_GREFS(grants) * BLK_RING_SIZE(info);
@@ -2387,6 +2397,8 @@ static void blkfront_gather_backend_feat
info->feature_persistent =
!!xenbus_read_unsigned(info->xbdev->otherend,
"feature-persistent", 0);
+ if (info->feature_persistent)
+ info->bounce = true;
indirect_segments = xenbus_read_unsigned(info->xbdev->otherend,
"feature-max-indirect-segments", 0);
@@ -2760,6 +2772,13 @@ static void blkfront_delay_work(struct w
struct blkfront_info *info;
bool need_schedule_work = false;
+ /*
+ * Note that when using bounce buffers but not persistent grants
+ * there's no need to run blkfront_delay_work because grants are
+ * revoked in blkif_completion or else an error is reported and the
+ * connection is closed.
+ */
+
mutex_lock(&blkfront_mutex);
list_for_each_entry(info, &info_list, info_list) {
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 80/84] xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (78 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 79/84] xen/blkfront: " Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 81/84] xen/arm: Fix race in RB-tree based P2M accounting Greg Kroah-Hartman
` (9 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Beulich, Juergen Gross
From: Jan Beulich <jbeulich@suse.com>
commit f63c2c2032c2e3caad9add3b82cc6e91c376fd26 upstream.
The commit referenced below moved the invocation past the "next" label,
without any explanation. In fact this allows misbehaving backends undue
control over the domain the frontend runs in, as earlier detected errors
require the skb to not be freed (it may be retained for later processing
via xennet_move_rx_slot(), or it may simply be unsafe to have it freed).
This is CVE-2022-33743 / XSA-405.
Fixes: 6c5aa6fc4def ("xen networking: add basic XDP support for xen-netfront")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netfront.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1096,8 +1096,10 @@ static int xennet_get_responses(struct n
}
}
rcu_read_unlock();
-next:
+
__skb_queue_tail(list, skb);
+
+next:
if (!(rx->flags & XEN_NETRXF_more_data))
break;
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 81/84] xen/arm: Fix race in RB-tree based P2M accounting
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (79 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 80/84] xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses() Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 82/84] net: usb: qmi_wwan: add Telit 0x1060 composition Greg Kroah-Hartman
` (8 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleksandr Tyshchenko,
Stefano Stabellini, Juergen Gross
From: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
commit b75cd218274e01d026dc5240e86fdeb44bbed0c8 upstream.
During the PV driver life cycle the mappings are added to
the RB-tree by set_foreign_p2m_mapping(), which is called from
gnttab_map_refs() and are removed by clear_foreign_p2m_mapping()
which is called from gnttab_unmap_refs(). As both functions end
up calling __set_phys_to_machine_multi() which updates the RB-tree,
this function can be called concurrently.
There is already a "p2m_lock" to protect against concurrent accesses,
but the problem is that the first read of "phys_to_mach.rb_node"
in __set_phys_to_machine_multi() is not covered by it, so this might
lead to the incorrect mappings update (removing in our case) in RB-tree.
In my environment the related issue happens rarely and only when
PV net backend is running, the xen_add_phys_to_mach_entry() claims
that it cannot add new pfn <-> mfn mapping to the tree since it is
already exists which results in a failure when mapping foreign pages.
But there might be other bad consequences related to the non-protected
root reads such use-after-free, etc.
While at it, also fix the similar usage in __pfn_to_mfn(), so
initialize "struct rb_node *n" with the "p2m_lock" held in both
functions to avoid possible bad consequences.
This is CVE-2022-33744 / XSA-406.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/xen/p2m.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/arm/xen/p2m.c
+++ b/arch/arm/xen/p2m.c
@@ -62,11 +62,12 @@ out:
unsigned long __pfn_to_mfn(unsigned long pfn)
{
- struct rb_node *n = phys_to_mach.rb_node;
+ struct rb_node *n;
struct xen_p2m_entry *entry;
unsigned long irqflags;
read_lock_irqsave(&p2m_lock, irqflags);
+ n = phys_to_mach.rb_node;
while (n) {
entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (entry->pfn <= pfn &&
@@ -153,10 +154,11 @@ bool __set_phys_to_machine_multi(unsigne
int rc;
unsigned long irqflags;
struct xen_p2m_entry *p2m_entry;
- struct rb_node *n = phys_to_mach.rb_node;
+ struct rb_node *n;
if (mfn == INVALID_P2M_ENTRY) {
write_lock_irqsave(&p2m_lock, irqflags);
+ n = phys_to_mach.rb_node;
while (n) {
p2m_entry = rb_entry(n, struct xen_p2m_entry, rbnode_phys);
if (p2m_entry->pfn <= pfn &&
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 82/84] net: usb: qmi_wwan: add Telit 0x1060 composition
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (80 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 81/84] xen/arm: Fix race in RB-tree based P2M accounting Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 83/84] net: usb: qmi_wwan: add Telit 0x1070 composition Greg Kroah-Hartman
` (7 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Carlo Lobrano, David S. Miller,
Fabio Porcedda
From: Carlo Lobrano <c.lobrano@gmail.com>
commit 8d17a33b076d24aa4861f336a125c888fb918605 upstream.
This patch adds support for Telit LN920 0x1060 composition
0x1060: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Carlo Lobrano <c.lobrano@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1293,6 +1293,7 @@ static const struct usb_device_id produc
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */
{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 83/84] net: usb: qmi_wwan: add Telit 0x1070 composition
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (81 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 82/84] net: usb: qmi_wwan: add Telit 0x1060 composition Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 11:58 ` [PATCH 5.10 84/84] clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup() Greg Kroah-Hartman
` (6 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniele Palmas, Bjørn Mork,
Jakub Kicinski, Fabio Porcedda
From: Daniele Palmas <dnlplm@gmail.com>
commit 94f2a444f28a649926c410eb9a38afb13a83ebe0 upstream.
Add the following Telit FN990 composition:
0x1070: tty, adb, rmnet, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20211210095722.22269-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/usb/qmi_wwan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1294,6 +1294,7 @@ static const struct usb_device_id produc
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)}, /* Telit FN990 */
{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
^ permalink raw reply [flat|nested] 95+ messages in thread* [PATCH 5.10 84/84] clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup()
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (82 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 83/84] net: usb: qmi_wwan: add Telit 0x1070 composition Greg Kroah-Hartman
@ 2022-07-05 11:58 ` Greg Kroah-Hartman
2022-07-05 18:04 ` [PATCH 5.10 00/84] 5.10.129-rc1 review Florian Fainelli
` (5 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Greg Kroah-Hartman @ 2022-07-05 11:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Linus Walleij, Daniel Lezcano
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ixp4xx_timer_setup is exported, and so can not be an __init function.
But it does not need to be exported as it is only called from one
in-kernel function, so just remove the EXPORT_SYMBOL_GPL() marking to
resolve the build warning.
This is fixed "properly" in commit 41929c9f628b
("clocksource/drivers/ixp4xx: Drop boardfile probe path") but that can
not be backported to older kernels as the reworking of the IXP4xx
codebase is not suitable for stable releases.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/clocksource/timer-ixp4xx.c | 1 -
1 file changed, 1 deletion(-)
--- a/drivers/clocksource/timer-ixp4xx.c
+++ b/drivers/clocksource/timer-ixp4xx.c
@@ -258,7 +258,6 @@ void __init ixp4xx_timer_setup(resource_
}
ixp4xx_timer_register(base, timer_irq, timer_freq);
}
-EXPORT_SYMBOL_GPL(ixp4xx_timer_setup);
#ifdef CONFIG_OF
static __init int ixp4xx_of_timer_init(struct device_node *np)
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (83 preceding siblings ...)
2022-07-05 11:58 ` [PATCH 5.10 84/84] clocksource/drivers/ixp4xx: remove EXPORT_SYMBOL_GPL from ixp4xx_timer_setup() Greg Kroah-Hartman
@ 2022-07-05 18:04 ` Florian Fainelli
2022-07-06 6:49 ` Naresh Kamboju
` (4 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Florian Fainelli @ 2022-07-05 18:04 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, sudipm.mukherjee, slade
On 7/5/22 04:57, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.129-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (84 preceding siblings ...)
2022-07-05 18:04 ` [PATCH 5.10 00/84] 5.10.129-rc1 review Florian Fainelli
@ 2022-07-06 6:49 ` Naresh Kamboju
2022-07-06 10:18 ` Sudip Mukherjee (Codethink)
` (3 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Naresh Kamboju @ 2022-07-06 6:49 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, sudipm.mukherjee,
slade
On Tue, 5 Jul 2022 at 17:37, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.129-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Build
* kernel: 5.10.129-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.10.y
* git commit: 29ca824cd19ac67c8cffb76d419103432e92223a
* git describe: v5.10.128-85-g29ca824cd19a
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10.128-85-g29ca824cd19a
## Test Regressions (compared to v5.10.128)
No test regressions found.
## Metric Regressions (compared to v5.10.128)
No metric regressions found.
## Test Fixes (compared to v5.10.128)
No test fixes found.
## Metric Fixes (compared to v5.10.128)
No metric fixes found.
## Test result summary
total: 127412, pass: 114362, fail: 281, skip: 12114, xfail: 655
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 308 total, 308 passed, 0 failed
* arm64: 62 total, 62 passed, 0 failed
* i386: 52 total, 49 passed, 3 failed
* mips: 48 total, 48 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 51 total, 51 passed, 0 failed
* riscv: 27 total, 27 passed, 0 failed
* s390: 21 total, 21 passed, 0 failed
* sh: 24 total, 24 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x86_64: 56 total, 55 passed, 1 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-test
* ltp-cap_bounds
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-fsx
* ltp-hugetlb
* ltp-io
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-open-posix-tests
* ltp-pty
* ltp-sched
* ltp-securebits
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (85 preceding siblings ...)
2022-07-06 6:49 ` Naresh Kamboju
@ 2022-07-06 10:18 ` Sudip Mukherjee (Codethink)
2022-07-06 13:44 ` Guenter Roeck
` (2 subsequent siblings)
89 siblings, 0 replies; 95+ messages in thread
From: Sudip Mukherjee (Codethink) @ 2022-07-06 10:18 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, linux, shuah, patches,
lkft-triage, pavel, jonathanh, f.fainelli, slade
Hi Greg,
On Tue, Jul 05, 2022 at 01:57:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
Build test (gcc version 11.3.1 20220627):
mips: 63 configs -> no failure
arm: 104 configs -> no failure
arm64: 3 configs -> no failure
x86_64: 4 configs -> no failure
alpha allmodconfig -> no failure
powerpc allmodconfig -> no failure
riscv allmodconfig -> no failure
s390 allmodconfig -> no failure
xtensa allmodconfig -> no failure
Boot test:
x86_64: Booted on my test laptop. No regression.
x86_64: Booted on qemu. No regression. [1]
arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/1457
[2]. https://openqa.qa.codethink.co.uk/tests/1460
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
--
Regards
Sudip
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (86 preceding siblings ...)
2022-07-06 10:18 ` Sudip Mukherjee (Codethink)
@ 2022-07-06 13:44 ` Guenter Roeck
2022-07-06 23:57 ` Shuah Khan
2022-07-07 0:53 ` Samuel Zou
89 siblings, 0 replies; 95+ messages in thread
From: Guenter Roeck @ 2022-07-06 13:44 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, torvalds, akpm, shuah, patches, lkft-triage,
pavel, jonathanh, f.fainelli, sudipm.mukherjee, slade
On Tue, Jul 05, 2022 at 01:57:23PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 163 pass: 163 fail: 0
Qemu test results:
total: 477 pass: 477 fail: 0
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (87 preceding siblings ...)
2022-07-06 13:44 ` Guenter Roeck
@ 2022-07-06 23:57 ` Shuah Khan
2022-07-07 0:53 ` Samuel Zou
89 siblings, 0 replies; 95+ messages in thread
From: Shuah Khan @ 2022-07-06 23:57 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, sudipm.mukherjee, slade, Shuah Khan
On 7/5/22 5:57 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.129-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
thanks,
-- Shuah
^ permalink raw reply [flat|nested] 95+ messages in thread* Re: [PATCH 5.10 00/84] 5.10.129-rc1 review
2022-07-05 11:57 [PATCH 5.10 00/84] 5.10.129-rc1 review Greg Kroah-Hartman
` (88 preceding siblings ...)
2022-07-06 23:57 ` Shuah Khan
@ 2022-07-07 0:53 ` Samuel Zou
89 siblings, 0 replies; 95+ messages in thread
From: Samuel Zou @ 2022-07-07 0:53 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, torvalds, akpm, linux, shuah, patches, lkft-triage, pavel,
jonathanh, f.fainelli, sudipm.mukherjee, slade
On 2022/7/5 19:57, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.129 release.
> There are 84 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 07 Jul 2022 11:55:56 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.129-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Tested on arm64 and x86 for 5.10.129-rc1,
Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.129-rc1
Commit: 29ca824cd19ac67c8cffb76d419103432e92223a
Compiler: gcc version 7.3.0 (GCC)
arm64:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9022
passed: 9022
failed: 0
timeout: 0
--------------------------------------------------------------------
x86:
--------------------------------------------------------------------
Testcase Result Summary:
total: 9022
passed: 9022
failed: 0
timeout: 0
--------------------------------------------------------------------
Tested-by: Hulk Robot <hulkrobot@huawei.com>
^ permalink raw reply [flat|nested] 95+ messages in thread