public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jens Axboe <axboe@kernel.dk>,
	Christian Marangi <ansuelsmth@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [net-next PATCH] net: dsa: qca8k: move driver to qca dir
Date: Wed, 13 Jul 2022 22:53:50 +0200	[thread overview]
Message-ID: <20220713205350.18357-1-ansuelsmth@gmail.com> (raw)

Move qca8k driver to qca dir in preparation for code split and
introduction of ipq4019 switch based on qca8k.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

This is a start for the required changes for code
split. Greg wasn't so negative about this kind of change
so I think we can finally make the move.

Still waiting some comments about the code split.
(Can I split qca8k to common function that will be
used by ipq4019? (and later propose the actual 
ipq4019 driver?))

 drivers/net/dsa/Kconfig           | 8 --------
 drivers/net/dsa/Makefile          | 1 -
 drivers/net/dsa/qca/Kconfig       | 8 ++++++++
 drivers/net/dsa/qca/Makefile      | 1 +
 drivers/net/dsa/{ => qca}/qca8k.c | 0
 drivers/net/dsa/{ => qca}/qca8k.h | 0
 6 files changed, 9 insertions(+), 9 deletions(-)
 rename drivers/net/dsa/{ => qca}/qca8k.c (100%)
 rename drivers/net/dsa/{ => qca}/qca8k.h (100%)

diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 702d68ae435a..d8ae0e8af2a0 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -60,14 +60,6 @@ source "drivers/net/dsa/sja1105/Kconfig"
 
 source "drivers/net/dsa/xrs700x/Kconfig"
 
-config NET_DSA_QCA8K
-	tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
-	select NET_DSA_TAG_QCA
-	select REGMAP
-	help
-	  This enables support for the Qualcomm Atheros QCA8K Ethernet
-	  switch chips.
-
 source "drivers/net/dsa/realtek/Kconfig"
 
 config NET_DSA_RZN1_A5PSW
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index b32907afa702..16eb879e0cb4 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -8,7 +8,6 @@ endif
 obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
 obj-$(CONFIG_NET_DSA_MT7530)	+= mt7530.o
 obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
 obj-$(CONFIG_NET_DSA_RZN1_A5PSW) += rzn1_a5psw.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
 obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
index 13b7e679b8b5..ba339747362c 100644
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
@@ -7,3 +7,11 @@ config NET_DSA_AR9331
 	help
 	  This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
 	  switch.
+
+config NET_DSA_QCA8K
+	tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
+	select NET_DSA_TAG_QCA
+	select REGMAP
+	help
+	  This enables support for the Qualcomm Atheros QCA8K Ethernet
+	  switch chips.
diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile
index 274022319066..40bb7c27285b 100644
--- a/drivers/net/dsa/qca/Makefile
+++ b/drivers/net/dsa/qca/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_AR9331)	+= ar9331.o
+obj-$(CONFIG_NET_DSA_QCA8K)	+= qca8k.o
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca/qca8k.c
similarity index 100%
rename from drivers/net/dsa/qca8k.c
rename to drivers/net/dsa/qca/qca8k.c
diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca/qca8k.h
similarity index 100%
rename from drivers/net/dsa/qca8k.h
rename to drivers/net/dsa/qca/qca8k.h
-- 
2.36.1


             reply	other threads:[~2022-07-13 20:54 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-13 20:53 Christian Marangi [this message]
2022-07-13 21:02 ` [net-next PATCH] net: dsa: qca8k: move driver to qca dir Florian Fainelli
2022-07-15  5:03 ` Jakub Kicinski
2022-07-15  1:57   ` Christian Marangi
2022-07-15 19:37     ` Jakub Kicinski
2022-07-15 19:16       ` Christian Marangi
2022-07-15 19:47         ` Jakub Kicinski
2022-07-15 19:25           ` Christian Marangi
2022-07-15 11:10 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220713205350.18357-1-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=axboe@kernel.dk \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox