From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Egor Vorontsov <sdoregor@sdore.me>, Takashi Iwai <tiwai@suse.de>,
Sasha Levin <sashal@kernel.org>,
perex@perex.cz, tiwai@suse.com, hahnjo@hahnjo.de,
willovertonuk@gmail.com, john-linux@pelago.org.uk,
brendan@grieve.com.au, alexander@tsoy.me,
alsa-devel@alsa-project.org
Subject: [PATCH AUTOSEL 5.18 35/41] ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
Date: Thu, 14 Jul 2022 00:22:15 -0400 [thread overview]
Message-ID: <20220714042221.281187-35-sashal@kernel.org> (raw)
In-Reply-To: <20220714042221.281187-1-sashal@kernel.org>
From: Egor Vorontsov <sdoregor@sdore.me>
[ Upstream commit 2307a0e1ca0b5c1337b37ac6302f96e017ebac3c ]
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/usb/quirks-table.h | 132 +++++++++++++++++++++++++++++++++++++++
sound/usb/quirks.c | 4 ++
2 files changed, 136 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 7067d314fecd..f93201a830b5 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -4167,6 +4167,138 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
+{
+ /*
+ * Fiero SC-01 (firmware v1.0.0 @ 48 kHz)
+ */
+ USB_DEVICE(0x2b53, 0x0023),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Fiero",
+ .product_name = "SC-01",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* Playback */
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 },
+ .clock = 0x29
+ }
+ },
+ /* Capture */
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC |
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 },
+ .clock = 0x29
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
+{
+ /*
+ * Fiero SC-01 (firmware v1.0.0 @ 96 kHz)
+ */
+ USB_DEVICE(0x2b53, 0x0024),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Fiero",
+ .product_name = "SC-01",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = &(const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ /* Playback */
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_96000,
+ .rate_min = 96000,
+ .rate_max = 96000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 96000 },
+ .clock = 0x29
+ }
+ },
+ /* Capture */
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 2,
+ .fmt_bits = 24,
+ .iface = 2,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC |
+ USB_ENDPOINT_SYNC_ASYNC |
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_96000,
+ .rate_min = 96000,
+ .rate_max = 96000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 96000 },
+ .clock = 0x29
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
/*
* Fiero SC-01 (firmware v1.1.0)
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index d42a59609886..c4c0847a68bf 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1911,6 +1911,10 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_ALIGN_TRANSFER),
DEVICE_FLG(0x1224, 0x2a25, /* Jieli Technology USB PHY 2.0 */
QUIRK_FLAG_GET_SAMPLE_RATE),
+ DEVICE_FLG(0x2b53, 0x0023, /* Fiero SC-01 (firmware v1.0.0 @ 48 kHz) */
+ QUIRK_FLAG_GENERIC_IMPLICIT_FB),
+ DEVICE_FLG(0x2b53, 0x0024, /* Fiero SC-01 (firmware v1.0.0 @ 96 kHz) */
+ QUIRK_FLAG_GENERIC_IMPLICIT_FB),
DEVICE_FLG(0x2b53, 0x0031, /* Fiero SC-01 (firmware v1.1.0) */
QUIRK_FLAG_GENERIC_IMPLICIT_FB),
--
2.35.1
next prev parent reply other threads:[~2022-07-14 4:28 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-14 4:21 [PATCH AUTOSEL 5.18 01/41] ASoC: ops: Fix off by one in range control validation Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 02/41] pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux() Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 03/41] ASoC: Realtek/Maxim SoundWire codecs: disable pm_runtime on remove Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 04/41] ASoC: rt711-sdca-sdw: fix calibrate mutex initialization Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 05/41] ASoC: Intel: sof_sdw: handle errors on card registration Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 06/41] ASoC: rt711: fix calibrate mutex initialization Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 07/41] ASoC: rt7*-sdw: harden jack_detect_handler Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 08/41] ASoC: codecs: rt700/rt711/rt711-sdca: initialize workqueues in probe Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 09/41] ASoC: SOF: Intel: hda-dsp: Expose hda_dsp_core_power_up() Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 10/41] ASoC: SOF: Intel: hda-loader: Make sure that the fw load sequence is followed Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 11/41] ASoC: SOF: Intel: hda-loader: Clarify the cl_dsp_init() flow Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 12/41] ASoC: wcd9335: Remove RX channel from old list before adding it to a new one Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 13/41] ASoC: wcd9335: Fix spurious event generation Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 14/41] ASoC: wcd938x: Fix event generation for some controls Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 15/41] ASoC: Intel: bytcr_wm5102: Fix GPIO related probe-ordering problem Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 16/41] ASoC: rockchip: i2s: switch BCLK to GPIO Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 17/41] ASoC: wm_adsp: Fix event for preloader Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 18/41] ASoC: wm5110: Fix DRE control Sasha Levin
2022-07-14 4:21 ` [PATCH AUTOSEL 5.18 19/41] ASoC: cs35l41: Correct some control names Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 20/41] ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 21/41] ASoC: dapm: Initialise kcontrol data for mux/demux controls Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 22/41] ASoC: cs35l41: Add ASP TX3/4 source to register patch Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 23/41] ASoC: cs47l15: Fix event generation for low power mux control Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 24/41] ASoC: madera: Fix event generation for OUT1 demux Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 25/41] ASoC: madera: Fix event generation for rate controls Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 26/41] irqchip: or1k-pic: Undefine mask_ack for level triggered hardware Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 27/41] pinctrl: imx: Add the zero base flag for imx93 Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 28/41] x86/xen: Use clear_bss() for Xen PV guests Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 29/41] x86: Clear .brk area at early boot Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 30/41] soc: ixp4xx/npe: Fix unused match warning Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 31/41] ARM: dts: stm32: use the correct clock source for CEC on stm32mp151 Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 32/41] Revert "can: xilinx_can: Limit CANFD brp to 2" Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 33/41] ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 34/41] ALSA: usb-audio: Add quirk for Fiero SC-01 Sasha Levin
2022-07-14 4:22 ` Sasha Levin [this message]
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 36/41] nvme-pci: phison e16 has bogus namespace ids Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 37/41] nvme: use struct group for generic command dwords Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 38/41] wireguard: selftests: set fake real time in init Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 39/41] wireguard: selftests: use virt machine on m68k Sasha Levin
2022-07-14 7:08 ` Geert Uytterhoeven
2022-07-17 23:01 ` Sasha Levin
2022-07-18 1:34 ` Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 40/41] wireguard: selftests: always call kernel makefile Sasha Levin
2022-07-14 4:22 ` [PATCH AUTOSEL 5.18 41/41] signal handling: don't use BUG_ON() for debugging Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220714042221.281187-35-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexander@tsoy.me \
--cc=alsa-devel@alsa-project.org \
--cc=brendan@grieve.com.au \
--cc=hahnjo@hahnjo.de \
--cc=john-linux@pelago.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sdoregor@sdore.me \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=tiwai@suse.de \
--cc=willovertonuk@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox