From: Oded Gabbay <ogabbay@kernel.org>
To: linux-kernel@vger.kernel.org
Cc: Tomer Tayar <ttayar@habana.ai>
Subject: [PATCH 2/9] habanalabs/gaudi2: enable all MMU SPI/SEI interrupts
Date: Wed, 20 Jul 2022 14:15:16 +0300 [thread overview]
Message-ID: <20220720111523.4069830-2-ogabbay@kernel.org> (raw)
In-Reply-To: <20220720111523.4069830-1-ogabbay@kernel.org>
From: Tomer Tayar <ttayar@habana.ai>
Currently only part of the MMU SPI/SEI interrupts are enabled, although
there is no real reason to not enable all.
The only exception is "burst_fifo_full" which is expected for PMMU
because it has a 2 entries FIFO, and thus is it not enabled for it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
drivers/misc/habanalabs/gaudi2/gaudi2.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2.c b/drivers/misc/habanalabs/gaudi2/gaudi2.c
index ab6ad06cec03..465d9c319c3c 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2.c
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2.c
@@ -117,6 +117,12 @@
#define MMU_RANGE_INV_ASID_EN_SHIFT 1
#define MMU_RANGE_INV_ASID_SHIFT 2
+/* The last SPI_SEI cause bit, "burst_fifo_full", is expected to be triggered in PMMU because it has
+ * a 2 entries FIFO, and hence it is not enabled for it.
+ */
+#define GAUDI2_PMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 2, 0)
+#define GAUDI2_HMMU_SPI_SEI_ENABLE_MASK GENMASK(GAUDI2_NUM_OF_MMU_SPI_SEI_CAUSE - 1, 0)
+
#define GAUDI2_MAX_STRING_LEN 64
#define GAUDI2_VDEC_MSIX_ENTRIES (GAUDI2_IRQ_NUM_SHARED_DEC1_ABNRM - \
@@ -4956,8 +4962,7 @@ static int gaudi2_mmu_update_hop0_addr(struct hl_device *hdev, u32 stlb_base)
return 0;
}
-static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base,
- u32 stlb_base)
+static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base, u32 stlb_base)
{
u32 status, timeout_usec;
int rc;
@@ -4985,7 +4990,6 @@ static int gaudi2_mmu_init_common(struct hl_device *hdev, u32 mmu_base,
return rc;
WREG32(mmu_base + MMU_BYPASS_OFFSET, 0);
- WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, 0xF);
rc = hl_poll_timeout(
hdev,
@@ -5042,6 +5046,8 @@ static int gaudi2_pci_mmu_init(struct hl_device *hdev)
DCORE0_HMMU0_MMU_STATIC_MULTI_PAGE_SIZE_CFG_8_BITS_HOP_MODE_EN_MASK);
}
+ WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_PMMU_SPI_SEI_ENABLE_MASK);
+
rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base);
if (rc)
return rc;
@@ -5092,6 +5098,8 @@ static int gaudi2_dcore_hmmu_init(struct hl_device *hdev, int dcore_id,
RMWREG32(stlb_base + STLB_HOP_CONFIGURATION_OFFSET, 1,
STLB_HOP_CONFIGURATION_ONLY_LARGE_PAGE_MASK);
+ WREG32(mmu_base + MMU_SPI_SEI_MASK_OFFSET, GAUDI2_HMMU_SPI_SEI_ENABLE_MASK);
+
rc = gaudi2_mmu_init_common(hdev, mmu_base, stlb_base);
if (rc)
return rc;
--
2.25.1
next prev parent reply other threads:[~2022-07-20 11:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-20 11:15 [PATCH 1/9] habanalabs: rename non_hard_reset to compute_reset Oded Gabbay
2022-07-20 11:15 ` Oded Gabbay [this message]
2022-07-20 11:15 ` [PATCH 3/9] habanalabs: set gnu_printf attribute for hl_engine_data_sprintf Oded Gabbay
2022-07-20 11:15 ` [PATCH 4/9] habanalabs: add return code field to module iterator Oded Gabbay
2022-07-20 11:15 ` [PATCH 5/9] habanalabs/gaudi: increase default cs timeout to 10 minutes Oded Gabbay
2022-07-20 11:15 ` [PATCH 6/9] habanalabs/gaudi2: remove old interrupt mappings Oded Gabbay
2022-07-20 11:15 ` [PATCH 7/9] habanalabs: fix spelling mistakes Oded Gabbay
2022-07-20 11:15 ` [PATCH 8/9] habanalabs: wrap macro arg with parentheses Oded Gabbay
2022-07-20 11:15 ` [PATCH 9/9] habanalabs: remove all kdma locks Oded Gabbay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720111523.4069830-2-ogabbay@kernel.org \
--to=ogabbay@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ttayar@habana.ai \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox