public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jens Axboe <axboe@kernel.dk>,
	Christian Marangi <ansuelsmth@gmail.com>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [net-next PATCH v5 09/14] net: dsa: qca8k: move set age/MTU/port enable/disable functions to common code
Date: Wed, 27 Jul 2022 13:35:18 +0200	[thread overview]
Message-ID: <20220727113523.19742-10-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220727113523.19742-1-ansuelsmth@gmail.com>

The same set age, MTU and port enable/disable function are used by
driver based on qca8k family switch.
Move them to common code to make them accessible also by other drivers.
While at it also drop unnecessary qca8k_priv cast for void pointers.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/dsa/qca/qca8k-8xxx.c   | 88 ------------------------------
 drivers/net/dsa/qca/qca8k-common.c | 85 +++++++++++++++++++++++++++++
 drivers/net/dsa/qca/qca8k.h        | 12 ++++
 3 files changed, 97 insertions(+), 88 deletions(-)

diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index 11d3116733af..1815863502c9 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -1908,94 +1908,6 @@ qca8k_port_fast_age(struct dsa_switch *ds, int port)
 	mutex_unlock(&priv->reg_mutex);
 }
 
-static int
-qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
-{
-	struct qca8k_priv *priv = ds->priv;
-	unsigned int secs = msecs / 1000;
-	u32 val;
-
-	/* AGE_TIME reg is set in 7s step */
-	val = secs / 7;
-
-	/* Handle case with 0 as val to NOT disable
-	 * learning
-	 */
-	if (!val)
-		val = 1;
-
-	return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK,
-				  QCA8K_ATU_AGE_TIME(val));
-}
-
-static int
-qca8k_port_enable(struct dsa_switch *ds, int port,
-		  struct phy_device *phy)
-{
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-	qca8k_port_set_status(priv, port, 1);
-	priv->port_enabled_map |= BIT(port);
-
-	if (dsa_is_user_port(ds, port))
-		phy_support_asym_pause(phy);
-
-	return 0;
-}
-
-static void
-qca8k_port_disable(struct dsa_switch *ds, int port)
-{
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-
-	qca8k_port_set_status(priv, port, 0);
-	priv->port_enabled_map &= ~BIT(port);
-}
-
-static int
-qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
-{
-	struct qca8k_priv *priv = ds->priv;
-	int ret;
-
-	/* We have only have a general MTU setting.
-	 * DSA always set the CPU port's MTU to the largest MTU of the slave
-	 * ports.
-	 * Setting MTU just for the CPU port is sufficient to correctly set a
-	 * value for every port.
-	 */
-	if (!dsa_is_cpu_port(ds, port))
-		return 0;
-
-	/* To change the MAX_FRAME_SIZE the cpu ports must be off or
-	 * the switch panics.
-	 * Turn off both cpu ports before applying the new value to prevent
-	 * this.
-	 */
-	if (priv->port_enabled_map & BIT(0))
-		qca8k_port_set_status(priv, 0, 0);
-
-	if (priv->port_enabled_map & BIT(6))
-		qca8k_port_set_status(priv, 6, 0);
-
-	/* Include L2 header / FCS length */
-	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu + ETH_HLEN + ETH_FCS_LEN);
-
-	if (priv->port_enabled_map & BIT(0))
-		qca8k_port_set_status(priv, 0, 1);
-
-	if (priv->port_enabled_map & BIT(6))
-		qca8k_port_set_status(priv, 6, 1);
-
-	return ret;
-}
-
-static int
-qca8k_port_max_mtu(struct dsa_switch *ds, int port)
-{
-	return QCA8K_MAX_MTU;
-}
-
 static int
 qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
 		      u16 port_mask, u16 vid)
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index 13069c9ba3e6..e25df4b23b9a 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -368,3 +368,88 @@ void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
 	qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
 		  QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
 }
+
+int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+	struct qca8k_priv *priv = ds->priv;
+	unsigned int secs = msecs / 1000;
+	u32 val;
+
+	/* AGE_TIME reg is set in 7s step */
+	val = secs / 7;
+
+	/* Handle case with 0 as val to NOT disable
+	 * learning
+	 */
+	if (!val)
+		val = 1;
+
+	return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL,
+				  QCA8K_ATU_AGE_TIME_MASK,
+				  QCA8K_ATU_AGE_TIME(val));
+}
+
+int qca8k_port_enable(struct dsa_switch *ds, int port,
+		      struct phy_device *phy)
+{
+	struct qca8k_priv *priv = ds->priv;
+
+	qca8k_port_set_status(priv, port, 1);
+	priv->port_enabled_map |= BIT(port);
+
+	if (dsa_is_user_port(ds, port))
+		phy_support_asym_pause(phy);
+
+	return 0;
+}
+
+void qca8k_port_disable(struct dsa_switch *ds, int port)
+{
+	struct qca8k_priv *priv = ds->priv;
+
+	qca8k_port_set_status(priv, port, 0);
+	priv->port_enabled_map &= ~BIT(port);
+}
+
+int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+	struct qca8k_priv *priv = ds->priv;
+	int ret;
+
+	/* We have only have a general MTU setting.
+	 * DSA always set the CPU port's MTU to the largest MTU of the slave
+	 * ports.
+	 * Setting MTU just for the CPU port is sufficient to correctly set a
+	 * value for every port.
+	 */
+	if (!dsa_is_cpu_port(ds, port))
+		return 0;
+
+	/* To change the MAX_FRAME_SIZE the cpu ports must be off or
+	 * the switch panics.
+	 * Turn off both cpu ports before applying the new value to prevent
+	 * this.
+	 */
+	if (priv->port_enabled_map & BIT(0))
+		qca8k_port_set_status(priv, 0, 0);
+
+	if (priv->port_enabled_map & BIT(6))
+		qca8k_port_set_status(priv, 6, 0);
+
+	/* Include L2 header / FCS length */
+	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu +
+			  ETH_HLEN + ETH_FCS_LEN);
+
+	if (priv->port_enabled_map & BIT(0))
+		qca8k_port_set_status(priv, 0, 1);
+
+	if (priv->port_enabled_map & BIT(6))
+		qca8k_port_set_status(priv, 6, 1);
+
+	return ret;
+}
+
+int qca8k_port_max_mtu(struct dsa_switch *ds, int port)
+{
+	return QCA8K_MAX_MTU;
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index edb2b23a02b9..e7d4df253b8c 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -463,4 +463,16 @@ int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
 void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
 			     struct dsa_bridge bridge);
 
+/* Common port enable/disable function */
+int qca8k_port_enable(struct dsa_switch *ds, int port,
+		      struct phy_device *phy);
+void qca8k_port_disable(struct dsa_switch *ds, int port);
+
+/* Common MTU function */
+int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu);
+int qca8k_port_max_mtu(struct dsa_switch *ds, int port);
+
+/* Common fast age function */
+int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs);
+
 #endif /* __QCA8K_H */
-- 
2.36.1


  parent reply	other threads:[~2022-07-27 11:36 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-27 11:35 [net-next PATCH v5 00/14] net: dsa: qca8k: code split for qca8k Christian Marangi
2022-07-27 11:35 ` [net-next PATCH v5 01/14] net: dsa: qca8k: cache match data to speed up access Christian Marangi
2022-07-27 14:50   ` Vladimir Oltean
2022-07-29 21:31   ` Florian Fainelli
2022-09-14 20:06   ` Regression: qca8k_sw_probe crashes (Was: Re: [net-next PATCH v5 01/14] net: dsa: qca8k: cache match data to speed up access) Pali Rohár
2022-09-14 20:08     ` Vladimir Oltean
2022-09-14 20:12       ` Pali Rohár
2022-07-27 11:35 ` [net-next PATCH v5 02/14] net: dsa: qca8k: make mib autocast feature optional Christian Marangi
2022-07-27 14:50   ` Vladimir Oltean
2022-07-29 21:32   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 03/14] net: dsa: qca8k: move mib struct to common code Christian Marangi
2022-07-29 21:33   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 04/14] net: dsa: qca8k: move qca8k read/write/rmw and reg table " Christian Marangi
2022-07-29 21:34   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 05/14] net: dsa: qca8k: move qca8k bulk read/write helper " Christian Marangi
2022-07-29 21:35   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 06/14] net: dsa: qca8k: move mib init function " Christian Marangi
2022-07-27 14:51   ` Vladimir Oltean
2022-07-29 21:35   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 07/14] net: dsa: qca8k: move port set status/eee/ethtool stats " Christian Marangi
2022-07-29 21:37   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 08/14] net: dsa: qca8k: move bridge functions " Christian Marangi
2022-07-29 21:38   ` Florian Fainelli
2022-07-27 11:35 ` Christian Marangi [this message]
2022-07-27 14:55   ` [net-next PATCH v5 09/14] net: dsa: qca8k: move set age/MTU/port enable/disable " Vladimir Oltean
2022-07-29 21:39   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 10/14] net: dsa: qca8k: move port FDB/MDB function " Christian Marangi
2022-07-27 14:54   ` Vladimir Oltean
2022-07-29 21:40   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 11/14] net: dsa: qca8k: move port mirror functions " Christian Marangi
2022-07-29 21:40   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 12/14] net: dsa: qca8k: move port VLAN " Christian Marangi
2022-07-29 21:41   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 13/14] net: dsa: qca8k: move port LAG " Christian Marangi
2022-07-29 21:42   ` Florian Fainelli
2022-07-27 11:35 ` [net-next PATCH v5 14/14] net: dsa: qca8k: move read_switch_id function " Christian Marangi
2022-07-27 14:52   ` Vladimir Oltean
2022-07-29  5:30 ` [net-next PATCH v5 00/14] net: dsa: qca8k: code split for qca8k patchwork-bot+netdevbpf
2022-07-29 21:42   ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220727113523.19742-10-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=axboe@kernel.dk \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox