From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Ahmad Fatoum <a.fatoum@pengutronix.de>,
Linus Walleij <linus.walleij@linaro.org>,
Marcel Holtmann <marcel@holtmann.org>
Subject: [PATCH 5.18 24/35] Bluetooth: hci_bcm: Add BCM4349B1 variant
Date: Tue, 9 Aug 2022 20:00:53 +0200 [thread overview]
Message-ID: <20220809175515.952454036@linuxfoundation.org> (raw)
In-Reply-To: <20220809175515.046484486@linuxfoundation.org>
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
commit 4f17c2b6694d0c4098f33b07ee3a696976940aa5 upstream.
The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth
portion can be controlled over serial.
Two subversions are added for the chip, because ROM firmware reports
002.002.013 (at least for the chips I have here), while depending on
patchram firmware revision, either 002.002.013 or 002.002.014 is
reported.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bluetooth/btbcm.c | 2 ++
drivers/bluetooth/hci_bcm.c | 1 +
2 files changed, 3 insertions(+)
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -453,6 +453,8 @@ static const struct bcm_subver_table bcm
{ 0x6606, "BCM4345C5" }, /* 003.006.006 */
{ 0x230f, "BCM4356A2" }, /* 001.003.015 */
{ 0x220e, "BCM20702A1" }, /* 001.002.014 */
+ { 0x420d, "BCM4349B1" }, /* 002.002.013 */
+ { 0x420e, "BCM4349B1" }, /* 002.002.014 */
{ 0x4217, "BCM4329B1" }, /* 002.002.023 */
{ 0x6106, "BCM4359C0" }, /* 003.001.006 */
{ 0x4106, "BCM4335A0" }, /* 002.001.006 */
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -1544,6 +1544,7 @@ static const struct of_device_id bcm_blu
{ .compatible = "brcm,bcm43430a0-bt" },
{ .compatible = "brcm,bcm43430a1-bt" },
{ .compatible = "brcm,bcm43438-bt", .data = &bcm43438_device_data },
+ { .compatible = "brcm,bcm4349-bt", .data = &bcm43438_device_data },
{ .compatible = "brcm,bcm43540-bt", .data = &bcm4354_device_data },
{ .compatible = "brcm,bcm4335a0" },
{ },
next prev parent reply other threads:[~2022-08-09 18:23 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-09 18:00 [PATCH 5.18 00/35] 5.18.17-rc1 review Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 01/35] x86/speculation: Make all RETbleed mitigations 64-bit only Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 02/35] block: fix default IO priority handling again Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 03/35] tools/vm/slabinfo: Handle files in debugfs Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 04/35] ACPI: video: Force backlight native for some TongFang devices Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 05/35] ACPI: video: Shortening quirk list by identifying Clevo by board_name only Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 06/35] ACPI: APEI: Better fix to avoid spamming the console with old error logs Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 07/35] crypto: arm64/poly1305 - fix a read out-of-bound Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 08/35] KVM: x86: do not report a vCPU as preempted outside instruction boundaries Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 09/35] KVM: x86: do not set st->preempted when going back to user space Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 10/35] KVM: selftests: Make hyperv_clock selftest more stable Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 11/35] KVM: x86/MMU: Zap non-leaf SPTEs when disabling dirty logging Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 12/35] entry/kvm: Exit to user mode when TIF_NOTIFY_SIGNAL is set Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 13/35] KVM: x86: disable preemption while updating apicv inhibition Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 14/35] KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 15/35] KVM: selftests: Restrict test region to 48-bit physical addresses when using nested Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 16/35] tools/kvm_stat: fix display of error when multiple processes are found Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 17/35] selftests: KVM: Handle compiler optimizations in ucall Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 18/35] KVM: x86/svm: add __GFP_ACCOUNT to __sev_dbg_{en,de}crypt_user() Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 19/35] arm64: set UXN on swapper page tables Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 20/35] btrfs: zoned: prevent allocation from previous data relocation BG Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 21/35] btrfs: zoned: fix critical section of relocation inode writeback Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 22/35] btrfs: zoned: drop optimization of zone finish Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 23/35] Bluetooth: hci_qca: Return wakeup for qca_wakeup Greg Kroah-Hartman
2022-08-09 18:00 ` Greg Kroah-Hartman [this message]
2022-08-09 18:00 ` [PATCH 5.18 25/35] Bluetooth: hci_bcm: Add DT compatible for CYW55572 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 26/35] dt-bindings: bluetooth: broadcom: Add BCM4349B1 DT binding Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 27/35] Bluetooth: btusb: Add support of IMC Networks PID 0x3568 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 28/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04CA:0x4007 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 29/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x04C5:0x1675 Greg Kroah-Hartman
2022-08-09 18:00 ` [PATCH 5.18 30/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0CB8:0xC558 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 31/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3587 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 32/35] Bluetooth: btusb: Add Realtek RTL8852C support ID 0x13D3:0x3586 Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 33/35] macintosh/adb: fix oob read in do_adb_query() function Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 34/35] x86/speculation: Add RSB VM Exit protections Greg Kroah-Hartman
2022-08-09 18:01 ` [PATCH 5.18 35/35] x86/speculation: Add LFENCE to RSB fill sequence Greg Kroah-Hartman
2022-08-09 21:47 ` [PATCH 5.18 00/35] 5.18.17-rc1 review Florian Fainelli
2022-08-10 6:16 ` Naresh Kamboju
2022-08-10 12:54 ` Ron Economos
2022-08-10 13:26 ` Sudip Mukherjee (Codethink)
2022-08-10 13:33 ` Guenter Roeck
2022-08-10 14:17 ` Justin Forbes
2022-08-10 14:31 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220809175515.952454036@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=a.fatoum@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox