From: Eliav Farber <farbere@amazon.com>
To: <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>,
<mark.rutland@arm.com>, <linux-hwmon@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <farbere@amazon.com>, <talel@amazon.com>, <hhhawa@amazon.com>,
<jonnyc@amazon.com>, <hanochu@amazon.com>, <ronenk@amazon.com>,
<itamark@amazon.com>, <shellykz@amazon.com>, <shorer@amazon.com>,
<amitlavi@amazon.com>, <almogbs@amazon.com>, <dwmw@amazon.co.uk>,
<rtanwar@maxlinear.com>
Subject: [PATCH 15/16] hwmon: (mr75203) fix coding style space errors
Date: Tue, 16 Aug 2022 08:27:56 +0000 [thread overview]
Message-ID: <20220816082757.11990-16-farbere@amazon.com> (raw)
In-Reply-To: <20220816082757.11990-1-farbere@amazon.com>
Fix: "ERROR: space required before the open parenthesis '('"
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
drivers/hwmon/mr75203.c | 40 ++++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 79831a0d5dca..2777feca1c11 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -172,7 +172,7 @@ static int pvt_read_temp(struct device *dev, u32 attr, int channel, long *val)
return ret;
ret = regmap_read(t_map, SDIF_DATA(channel), &nbs);
- if(ret < 0)
+ if (ret < 0)
return ret;
nbs &= SAMPLE_DATA_MSK;
@@ -217,7 +217,7 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
return ret;
ret = regmap_read(v_map, VM_SDIF_DATA(vm_idx, ch_idx), &n);
- if(ret < 0)
+ if (ret < 0)
return ret;
n &= SAMPLE_DATA_MSK;
@@ -320,19 +320,19 @@ static int pvt_init(struct pvt_device *pvt)
if (t_num) {
ret = regmap_write(t_map, SDIF_SMPL_CTRL, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(t_map, SDIF_HALT, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(t_map, CLK_SYNTH, clk_synth);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(t_map, SDIF_DISABLE, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
@@ -345,7 +345,7 @@ static int pvt_init(struct pvt_device *pvt)
val = CFG0_MODE_2 | CFG0_PARALLEL_OUT | CFG0_12_BIT |
IP_CFG << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(t_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
@@ -358,7 +358,7 @@ static int pvt_init(struct pvt_device *pvt)
val = POWER_DELAY_CYCLE_256 | IP_TMR << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(t_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(t_map, SDIF_STAT,
@@ -372,39 +372,39 @@ static int pvt_init(struct pvt_device *pvt)
IP_CTRL << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(t_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
}
if (p_num) {
ret = regmap_write(p_map, SDIF_HALT, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(p_map, SDIF_DISABLE, BIT(p_num) - 1);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(p_map, CLK_SYNTH, clk_synth);
- if(ret < 0)
+ if (ret < 0)
return ret;
}
if (v_num) {
ret = regmap_write(v_map, SDIF_SMPL_CTRL, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(v_map, SDIF_HALT, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(v_map, CLK_SYNTH, clk_synth);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_write(v_map, SDIF_DISABLE, 0x0);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
@@ -432,7 +432,7 @@ static int pvt_init(struct pvt_device *pvt)
CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(v_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
@@ -445,7 +445,7 @@ static int pvt_init(struct pvt_device *pvt)
val = POWER_DELAY_CYCLE_64 | IP_TMR << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(v_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
@@ -459,7 +459,7 @@ static int pvt_init(struct pvt_device *pvt)
IP_CTRL << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(v_map, SDIF_W, val);
- if(ret < 0)
+ if (ret < 0)
return ret;
}
@@ -584,7 +584,7 @@ static int mr75203_probe(struct platform_device *pdev)
}
ret = regmap_read(pvt->c_map, PVT_IP_CONFIG, &val);
- if(ret < 0)
+ if (ret < 0)
return ret;
ts_num = (val & TS_NUM_MSK) >> TS_NUM_SFT;
--
2.37.1
next prev parent reply other threads:[~2022-08-16 10:03 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-16 8:27 [PATCH 00/16] Variety of fixes and new features for mr75203 driver Eliav Farber
2022-08-16 8:27 ` [PATCH 01/16] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined Eliav Farber
2022-08-16 8:27 ` [PATCH 02/16] hwmon: (mr75203) update pvt->v_num to the actual number of used sensors Eliav Farber
2022-08-16 8:27 ` [PATCH 03/16] hwmon: (mr75203) update Moortec PVT controller intel,vm-map property Eliav Farber
2022-08-18 15:02 ` Rob Herring
2022-08-16 8:27 ` [PATCH 04/16] hwmon: (mr75203) add Moortec PVT controller reset-control-skip property Eliav Farber
2022-08-16 8:27 ` [PATCH 05/16] hwmon: (mr75203) add option to skip reset controller Eliav Farber
2022-08-16 8:27 ` [PATCH 06/16] hwmon: (mr75203) fix multi-channel voltage reading Eliav Farber
2022-08-16 8:27 ` [PATCH 07/16] hwmon: (mr75203) add VM active channels property for Moortec PVT controller Eliav Farber
2022-08-16 8:27 ` [PATCH 08/16] hwmon: (mr75203) add VM active channel support Eliav Farber
2022-08-16 16:52 ` kernel test robot
2022-08-16 18:17 ` kernel test robot
2022-08-16 19:55 ` kernel test robot
2022-08-16 8:27 ` [PATCH 09/16] hwmon: (mr75203) add VM pre-scalar property for Moortec PVT controller Eliav Farber
2022-08-16 8:27 ` [PATCH 10/16] hwmon: (mr75203) add VM pre-scalar support Eliav Farber
2022-08-16 8:27 ` [PATCH 11/16] hwmon: (mr75203) add protection for negative voltage value Eliav Farber
2022-08-16 8:27 ` [PATCH 12/16] hwmon: (mr75203) modify the temperature equation Eliav Farber
2022-08-16 8:27 ` [PATCH 13/16] hwmon: (mr75203) add thermal coefficient properties for Moortec PVT controller Eliav Farber
2022-08-18 15:05 ` Rob Herring
2022-08-16 8:27 ` [PATCH 14/16] hwmon: (mr75203) parse thermal coefficients from device-tree Eliav Farber
2022-08-16 8:27 ` Eliav Farber [this message]
2022-08-16 8:27 ` [PATCH 16/16] hwmon: (mr75203) add debugfs to read and write temperature coefficients Eliav Farber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220816082757.11990-16-farbere@amazon.com \
--to=farbere@amazon.com \
--cc=almogbs@amazon.com \
--cc=amitlavi@amazon.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw@amazon.co.uk \
--cc=hanochu@amazon.com \
--cc=hhhawa@amazon.com \
--cc=itamark@amazon.com \
--cc=jdelvare@suse.com \
--cc=jonnyc@amazon.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=rtanwar@maxlinear.com \
--cc=shellykz@amazon.com \
--cc=shorer@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox