[PATCH net v4 1/3] selftests: include bonding tests into the kselftest infra

[PATCH net v4 1/3] selftests: include bonding tests into the kselftest infra

[Jonathan Toppins]

This creates a test collection in drivers/net/bonding for bonding
specific kernel selftests.

The first test is a reproducer that provisions a bond and given the
specific order in how the ip-link(8) commands are issued the bond never
transmits an LACPDU frame on any of its slaves.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
---

Notes:
    v2:
     * fully integrated the test into the kselftests infrastructure
     * moved the reproducer to under
       tools/testing/selftests/drivers/net/bonding
     * reduced the test to its minimial amount and used ip-link(8) for
       all bond interface configuration
    v3:
     * rebase to latest net/master
     * remove `#set -x` requested by Hangbin
    v4:
     * no changes

 MAINTAINERS                                   |  1 +
 tools/testing/selftests/Makefile              |  1 +
 .../selftests/drivers/net/bonding/Makefile    |  6 ++
 .../net/bonding/bond-break-lacpdu-tx.sh       | 81 +++++++++++++++++++
 .../selftests/drivers/net/bonding/config      |  1 +
 .../selftests/drivers/net/bonding/settings    |  1 +
 6 files changed, 91 insertions(+)
 create mode 100644 tools/testing/selftests/drivers/net/bonding/Makefile
 create mode 100755 tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
 create mode 100644 tools/testing/selftests/drivers/net/bonding/config
 create mode 100644 tools/testing/selftests/drivers/net/bonding/settings

diff --git a/MAINTAINERS b/MAINTAINERS
index f2d64020399b..e5fb14dc302d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3672,6 +3672,7 @@ F:	Documentation/networking/bonding.rst
 F:	drivers/net/bonding/
 F:	include/net/bond*
 F:	include/uapi/linux/if_bonding.h
+F:	tools/testing/selftests/net/bonding/
 
 BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
 M:	Dan Robertson <dan@dlrobertson.com>
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index 10b34bb03bc1..c2064a35688b 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -12,6 +12,7 @@ TARGETS += cpu-hotplug
 TARGETS += damon
 TARGETS += drivers/dma-buf
 TARGETS += drivers/s390x/uvdevice
+TARGETS += drivers/net/bonding
 TARGETS += efivarfs
 TARGETS += exec
 TARGETS += filesystems
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
new file mode 100644
index 000000000000..ab6c54b12098
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := bond-break-lacpdu-tx.sh
+
+include ../../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
new file mode 100755
index 000000000000..47ab90596acb
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh
@@ -0,0 +1,81 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify LACPDUs get transmitted after setting the MAC address of
+#   the bond.
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=2020773
+#
+#       +---------+
+#       | fab-br0 |
+#       +---------+
+#            |
+#       +---------+
+#       |  fbond  |
+#       +---------+
+#        |       |
+#    +------+ +------+
+#    |veth1 | |veth2 |
+#    +------+ +------+
+#
+# We use veths instead of physical interfaces
+
+set -e
+tmp=$(mktemp -q dump.XXXXXX)
+cleanup() {
+	ip link del fab-br0 >/dev/null 2>&1 || :
+	ip link del fbond  >/dev/null 2>&1 || :
+	ip link del veth1-bond  >/dev/null 2>&1 || :
+	ip link del veth2-bond  >/dev/null 2>&1 || :
+	modprobe -r bonding  >/dev/null 2>&1 || :
+	rm -f -- ${tmp}
+}
+
+trap cleanup 0 1 2
+cleanup
+sleep 1
+
+# create the bridge
+ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \
+	forward_delay 15
+
+# create the bond
+ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \
+	ad_actor_sys_prio 65535 lacp_rate fast
+
+# set bond address
+ip link set fbond address 52:54:00:3B:7C:A6
+ip link set fbond up
+
+# set again bond sysfs parameters
+ip link set fbond type bond ad_actor_sys_prio 65535
+
+# create veths
+ip link add name veth1-bond type veth peer name veth1-end
+ip link add name veth2-bond type veth peer name veth2-end
+
+# add ports
+ip link set fbond master fab-br0
+ip link set veth1-bond down master fbond
+ip link set veth2-bond down master fbond
+
+# bring up
+ip link set veth1-end up
+ip link set veth2-end up
+ip link set fab-br0 up
+ip link set fbond up
+ip addr add dev fab-br0 10.0.0.3
+
+tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 &
+sleep 15
+pkill tcpdump >/dev/null 2>&1
+rc=0
+num=$(grep "packets captured" ${tmp} | awk '{print $1}')
+if test "$num" -gt 0; then
+	echo "PASS, captured ${num}"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc
diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
new file mode 100644
index 000000000000..dc1c22de3c92
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -0,0 +1 @@
+CONFIG_BONDING=y
diff --git a/tools/testing/selftests/drivers/net/bonding/settings b/tools/testing/selftests/drivers/net/bonding/settings
new file mode 100644
index 000000000000..867e118223cd
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/settings
@@ -0,0 +1 @@
+timeout=60
-- 
2.31.1

[PATCH net v4 2/3] bonding: 802.3ad: fix no transmission of LACPDUs

[Jonathan Toppins]

This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.

To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.

line 44: ip link add fbond type bond mode 4 miimon 200 \
            xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
    bond->dev->dev_addr = new_mac

line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 60: ip link set veth1-bond down master fbond
given:
    params.ad_actor_system = 0
    params.mode = BOND_MODE_8023AD
    ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
    bond_enslave
    -> bond_3ad_initialize(); because first slave
       -> if ad.system.sys_mac_addr != bond->dev->dev_addr
          return
results:
     Nothing is run in bond_3ad_initialize() because dev_addr equals
     sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
     never initialized anywhere else.

The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.

Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
---

Notes:
    v2:
     * split this fix from the reproducer
    v3:
     * rebased to latest net/master
    v4:
     * instead of setting ad_ticks_per_sec remove the if statement around the
       body of the function of bond_3ad_initialize().

 drivers/net/bonding/bond_3ad.c | 38 ++++++++++++++--------------------
 1 file changed, 16 insertions(+), 22 deletions(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index d7fb33c078e8..1f0120cbe9e8 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2007,30 +2007,24 @@ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
  */
 void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
 {
-	/* check that the bond is not initialized yet */
-	if (!MAC_ADDRESS_EQUAL(&(BOND_AD_INFO(bond).system.sys_mac_addr),
-				bond->dev->dev_addr)) {
-
-		BOND_AD_INFO(bond).aggregator_identifier = 0;
-
-		BOND_AD_INFO(bond).system.sys_priority =
-			bond->params.ad_actor_sys_prio;
-		if (is_zero_ether_addr(bond->params.ad_actor_system))
-			BOND_AD_INFO(bond).system.sys_mac_addr =
-			    *((struct mac_addr *)bond->dev->dev_addr);
-		else
-			BOND_AD_INFO(bond).system.sys_mac_addr =
-			    *((struct mac_addr *)bond->params.ad_actor_system);
+	BOND_AD_INFO(bond).aggregator_identifier = 0;
+	BOND_AD_INFO(bond).system.sys_priority =
+		bond->params.ad_actor_sys_prio;
+	if (is_zero_ether_addr(bond->params.ad_actor_system))
+		BOND_AD_INFO(bond).system.sys_mac_addr =
+		    *((struct mac_addr *)bond->dev->dev_addr);
+	else
+		BOND_AD_INFO(bond).system.sys_mac_addr =
+		    *((struct mac_addr *)bond->params.ad_actor_system);
 
-		/* initialize how many times this module is called in one
-		 * second (should be about every 100ms)
-		 */
-		ad_ticks_per_sec = tick_resolution;
+	/* initialize how many times this module is called in one
+	 * second (should be about every 100ms)
+	 */
+	ad_ticks_per_sec = tick_resolution;
 
-		bond_3ad_initiate_agg_selection(bond,
-						AD_AGGREGATOR_SELECTION_TIMER *
-						ad_ticks_per_sec);
-	}
+	bond_3ad_initiate_agg_selection(bond,
+					AD_AGGREGATOR_SELECTION_TIMER *
+					ad_ticks_per_sec);
 }
 
 /**
-- 
2.31.1

[PATCH net v4 3/3] bonding: 3ad: make ad_ticks_per_sec a const

[Jonathan Toppins]

The value is only ever set once in bond_3ad_initialize and only ever
read otherwise. There seems to be no reason to set the variable via
bond_3ad_initialize when setting the global variable will do. Change
ad_ticks_per_sec to a const to enforce its read-only usage.

Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
---

Notes:
    v4:
     * remove passing the value of ad_ticks_per_sec on the stack and
       set ad_ticks_per_sec and make as const

 drivers/net/bonding/bond_3ad.c  | 10 +++-------
 drivers/net/bonding/bond_main.c |  2 +-
 include/net/bond_3ad.h          |  2 +-
 3 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 1f0120cbe9e8..2946290ca517 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -84,7 +84,8 @@ enum ad_link_speed_type {
 static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = {
 	0, 0, 0, 0, 0, 0
 };
-static u16 ad_ticks_per_sec;
+
+static const u16 ad_ticks_per_sec = 1000 / AD_TIMER_INTERVAL;
 static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
 
 static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned =
@@ -2005,7 +2006,7 @@ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
  *
  * Can be called only after the mac address of the bond is set.
  */
-void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
+void bond_3ad_initialize(struct bonding *bond)
 {
 	BOND_AD_INFO(bond).aggregator_identifier = 0;
 	BOND_AD_INFO(bond).system.sys_priority =
@@ -2017,11 +2018,6 @@ void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
 		BOND_AD_INFO(bond).system.sys_mac_addr =
 		    *((struct mac_addr *)bond->params.ad_actor_system);
 
-	/* initialize how many times this module is called in one
-	 * second (should be about every 100ms)
-	 */
-	ad_ticks_per_sec = tick_resolution;
-
 	bond_3ad_initiate_agg_selection(bond,
 					AD_AGGREGATOR_SELECTION_TIMER *
 					ad_ticks_per_sec);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 50e60843020c..2f4da2c13c0a 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2081,7 +2081,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 			/* Initialize AD with the number of times that the AD timer is called in 1 second
 			 * can be called only after the mac address of the bond is set
 			 */
-			bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
+			bond_3ad_initialize(bond);
 		} else {
 			SLAVE_AD_INFO(new_slave)->id =
 				SLAVE_AD_INFO(prev_slave)->id + 1;
diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h
index 184105d68294..be2992e6de5d 100644
--- a/include/net/bond_3ad.h
+++ b/include/net/bond_3ad.h
@@ -290,7 +290,7 @@ static inline const char *bond_3ad_churn_desc(churn_state_t state)
 }
 
 /* ========== AD Exported functions to the main bonding code ========== */
-void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution);
+void bond_3ad_initialize(struct bonding *bond);
 void bond_3ad_bind_slave(struct slave *slave);
 void bond_3ad_unbind_slave(struct slave *slave);
 void bond_3ad_state_machine_handler(struct work_struct *);
-- 
2.31.1

Re: [PATCH net v4 3/3] bonding: 3ad: make ad_ticks_per_sec a const

[Jakub Kicinski]

On Thu, 18 Aug 2022 10:41:12 -0400 Jonathan Toppins wrote:
> @@ -2005,7 +2006,7 @@ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
>   *
>   * Can be called only after the mac address of the bond is set.
>   */
> -void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
> +void bond_3ad_initialize(struct bonding *bond)

kdoc needs updating here