Re: Regression in 5.19.0: USB errors during boot

Greg Kroah-Hartman
2022-08-18T14:47:28Z

[Adding in linux-usb@vger]

On Thu, Aug 18, 2022 at 03:36:44PM +0100, Alan J. Wylie wrote:
>
> Apologies for the delay in reporting this: I messed up my first attempt at
> bisecting, then I've spent a week going to, enjoying, returning from and
> recovering from a music festival.
>
> Up to and including 5.18.18 things are fine. With 5.19.0 (and .1 and .2) I see
> lots of errors and hangs on the USB2 chipset, e.g.
>
> $ grep "usb 9-4" dmesg.5.19.2
> [ 6.669075] usb 9-4: new full-speed USB device number 2 using ohci-pci
> [ 6.829087] usb 9-4: device descriptor read/64, error -32
> [ 7.097094] usb 9-4: device descriptor read/64, error -32
> [ 7.361087] usb 9-4: new full-speed USB device number 3 using ohci-pci
> [ 7.521152] usb 9-4: device descriptor read/64, error -32
> [ 7.789066] usb 9-4: device descriptor read/64, error -32
> [ 8.081070] usb 9-4: new full-speed USB device number 4 using ohci-pci
> [ 8.497138] usb 9-4: device not accepting address 4, error -32
> [ 8.653140] usb 9-4: new full-speed USB device number 5 using ohci-pci
> [ 9.069141] usb 9-4: device not accepting address 5, error -32
> $
>
> $ grep "usb 1-2" dmesg.5.19.2
> [ 5.917102] usb 1-2: new high-speed USB device number 2 using ehci-pci
> [ 6.277076] usb 1-2: device descriptor read/64, error -71
> [ 6.513143] usb 1-2: device descriptor read/64, error -32
> [ 6.753146] usb 1-2: new high-speed USB device number 3 using ehci-pci
> [ 6.881143] usb 1-2: device descriptor read/64, error -32
> [ 7.117144] usb 1-2: device descriptor read/64, error -32
> [ 7.429141] usb 1-2: new high-speed USB device number 4 using ehci-pci
> [ 7.845134] usb 1-2: device not accepting address 4, error -32
> [ 7.977142] usb 1-2: new high-speed USB device number 5 using ehci-pci
> [ 8.393158] usb 1-2: device not accepting address 5, error -32
> $
>
> the USB port is then no longer usable
>
> This is not reproducible on the other chipset (USB3) on this machine,
> nor on two other systems. Swapping USB cables doesn't help.
>
> I have bisected it to
>
> $ git bisect bad
> 78013eaadf696d2105982abb4018fbae394ca08f is the first bad commit
> commit 78013eaadf696d2105982abb4018fbae394ca08f
> Author: Christoph Hellwig <hch@lst.de>
> Date: Mon Feb 14 14:11:44 2022 +0100
>
> x86: remove the IOMMU table infrastructure
>
> however it will not easily revert
>
> I'll be more than happy to assist with any debugging/testing.
>
> $ git revert 78013eaadf696d2105982abb4018fbae394ca08f
> Auto-merging arch/x86/include/asm/dma-mapping.h
> CONFLICT (content): Merge conflict in arch/x86/include/asm/dma-mapping.h
> Auto-merging arch/x86/include/asm/iommu.h
> Auto-merging arch/x86/include/asm/xen/swiotlb-xen.h
> Auto-merging arch/x86/kernel/Makefile
> Auto-merging arch/x86/kernel/pci-dma.c
> CONFLICT (content): Merge conflict in arch/x86/kernel/pci-dma.c
> Auto-merging arch/x86/kernel/vmlinux.lds.S
> Auto-merging drivers/iommu/amd/init.c
> Auto-merging drivers/iommu/amd/iommu.c
> CONFLICT (content): Merge conflict in drivers/iommu/amd/iommu.c
> Auto-merging drivers/iommu/intel/dmar.c
> error: could not revert 78013eaadf69... x86: remove the IOMMU table infrastructure
>
> # dmidecode | grep -A2 "^Base Board"
> Base Board Information
> Manufacturer: Gigabyte Technology Co., Ltd.
> Product Name: 970A-DS3P
> #
>
> # lspci -nn | grep -i usb
> 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
> 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
> 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
> 00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
> 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
> 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
> 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
> 02:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller [1106:3483] (rev 01)

So this only happens with the on-board USB 2 controller?

This is odd, I would not expect one PCI controller to work, but the
other one not.

> #
>
> # lspci -v -s 00:12
> 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller (prog-if 10 [OHCI])
> Subsystem: Gigabyte Technology Co., Ltd GA-880GMA-USB3
> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
> Memory at fe50a000 (32-bit, non-prefetchable) [size=4K]
> Kernel driver in use: ohci-pci
> Kernel modules: ohci_pci
> 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller (prog-if 20 [EHCI])
> Subsystem: Gigabyte Technology Co., Ltd GA-880GMA-USB3
> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
> Memory at fe509000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [c0] Power Management version 2
> Capabilities: [e4] Debug port: BAR=1 offset=00e0
> Kernel driver in use: ehci-pci
> Kernel modules: ehci_pci
> #

What is the output of the lspci -v for the USB 3 controller?

Christoph, any ideas?

thanks,

greg k-h