[PATCH 3/7] habanalabs: ignore EEPROM errors during boot

[Oded Gabbay <ogabbay@kernel.org>]

From: Ofir Bitton <obitton@habana.ai>

EEPROM errors reported by firmware are basically warnings and
should not fail the boot process.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
---
 drivers/misc/habanalabs/common/firmware_if.c        | 9 +++++++++
 drivers/misc/habanalabs/include/common/hl_boot_if.h | 5 +++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 12d0f18c1f6c..4ede4bb03e8e 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -573,6 +573,15 @@ static bool fw_report_boot_dev0(struct hl_device *hdev, u32 err_val,
 		dev_dbg(hdev->dev, "Device status0 %#x\n", sts_val);
 
 	/* All warnings should go here in order not to reach the unknown error validation */
+	if (err_val & CPU_BOOT_ERR0_EEPROM_FAIL) {
+		dev_warn(hdev->dev,
+			"Device boot warning - EEPROM failure detected, default settings applied\n");
+		/* This is a warning so we don't want it to disable the
+		 * device
+		 */
+		err_val &= ~CPU_BOOT_ERR0_EEPROM_FAIL;
+	}
+
 	if (err_val & CPU_BOOT_ERR0_DRAM_SKIPPED) {
 		dev_warn(hdev->dev,
 			"Device boot warning - Skipped DRAM initialization\n");
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index f2f6488de625..2e45be5de4fe 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -34,6 +34,7 @@ enum cpu_boot_err {
 	CPU_BOOT_ERR_BINNING_FAIL = 19,
 	CPU_BOOT_ERR_TPM_FAIL = 20,
 	CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL = 21,
+	CPU_BOOT_ERR_EEPROM_FAIL = 22,
 	CPU_BOOT_ERR_ENABLED = 31,
 	CPU_BOOT_ERR_SCND_EN = 63,
 	CPU_BOOT_ERR_LAST = 64 /* we have 2 registers of 32 bits */
@@ -115,6 +116,9 @@ enum cpu_boot_err {
  * CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL	Failed to set threshold for tmperature
  *					sensor.
  *
+ * CPU_BOOT_ERR_EEPROM_FAIL		Failed reading EEPROM data. Defaults
+ *					are used.
+ *
  * CPU_BOOT_ERR0_ENABLED		Error registers enabled.
  *					This is a main indication that the
  *					running FW populates the error
@@ -139,6 +143,7 @@ enum cpu_boot_err {
 #define CPU_BOOT_ERR0_BINNING_FAIL		(1 << CPU_BOOT_ERR_BINNING_FAIL)
 #define CPU_BOOT_ERR0_TPM_FAIL			(1 << CPU_BOOT_ERR_TPM_FAIL)
 #define CPU_BOOT_ERR0_TMP_THRESH_INIT_FAIL	(1 << CPU_BOOT_ERR_TMP_THRESH_INIT_FAIL)
+#define CPU_BOOT_ERR0_EEPROM_FAIL		(1 << CPU_BOOT_ERR_EEPROM_FAIL)
 #define CPU_BOOT_ERR0_ENABLED			(1 << CPU_BOOT_ERR_ENABLED)
 #define CPU_BOOT_ERR1_ENABLED			(1 << CPU_BOOT_ERR_ENABLED)
 
-- 
2.25.1