[PATCH 01/14] ARM: dts: qcom: align SPMI PMIC ADC node name with dtschema

Krzysztof Kozlowski
2022-08-28T08:43:59Z

Bindings expect VADC node name to be "adc":

pmic@0: 'vadc@3100' does not match any of the regexes

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +-
arch/arm/boot/dts/qcom-pma8084.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 59d0cde63251..3e5c85fbed7b 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -93,7 +93,7 @@ pm8941_temp: temp-alarm@2400 {
#thermal-sensor-cells = <0>;
};

- pm8941_vadc: vadc@3100 {
+ pm8941_vadc: adc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 7b8a8d9695da..e77602e9f95c 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -56,7 +56,7 @@ pma8084_temp: temp-alarm@2400 {
io-channel-names = "thermal";
};

- pma8084_vadc: vadc@3100 {
+ pma8084_vadc: adc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
--
2.34.1