[PATCH AUTOSEL 4.14 1/8] firmware: dmi: Use the proper accessor for the version field

[PATCH AUTOSEL 4.14 1/8] firmware: dmi: Use the proper accessor for the version field

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit d2139dfca361a1f5bfc4d4a23455b1a409a69cd4 ]

The byte at offset 6 represents length. Don't take it and drop it
immediately by using proper accessor, i.e. get_unaligned_be24().

[JD: Change the subject to something less frightening]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/dmi_scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
index fe0d30340e963..d07a15462e252 100644
--- a/drivers/firmware/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -582,7 +582,7 @@ static int __init dmi_smbios3_present(const u8 *buf)
 {
 	if (memcmp(buf, "_SM3_", 5) == 0 &&
 	    buf[6] < 32 && dmi_checksum(buf, buf[6])) {
-		dmi_ver = get_unaligned_be32(buf + 6) & 0xFFFFFF;
+		dmi_ver = get_unaligned_be24(buf + 7);
 		dmi_num = 0;			/* No longer specified */
 		dmi_len = get_unaligned_le32(buf + 12);
 		dmi_base = get_unaligned_le64(buf + 16);
-- 
2.35.1

[PATCH AUTOSEL 4.14 2/8] drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.

[Sasha Levin]

From: Candice Li <candice.li@amd.com>

[ Upstream commit c351938350ab9b5e978dede2c321da43de7eb70c ]

No need to set up rb when no gfx rings.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 53186c5e1066b..bb0d32b4be74d 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -1514,7 +1514,8 @@ static void gfx_v9_0_gpu_init(struct amdgpu_device *adev)
 
 	gfx_v9_0_tiling_mode_table_init(adev);
 
-	gfx_v9_0_setup_rb(adev);
+	if (adev->gfx.num_gfx_rings)
+		gfx_v9_0_setup_rb(adev);
 	gfx_v9_0_get_cu_info(adev, &adev->gfx.cu_info);
 
 	/* XXX SH_MEM regs */
-- 
2.35.1

[PATCH AUTOSEL 4.14 3/8] drm/radeon: add a force flush to delay work when radeon

[Sasha Levin]

From: Zhenneng Li <lizhenneng@kylinos.cn>

[ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ]

Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>]  ra = [<ffffffff81240844>]  ps = 0000 Tainted: G        W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000  t0 = fff08800e0008010  t1 = 0000000000010000
t2 = 0000000000008010  t3 = fff00007e3c00000  t4 = fff00007e3c00258
t5 = 000000000000ffff  t6 = 0000000000000001  t7 = fff00007ef078000
s0 = fff00007e3c016e8  s1 = fff00007e3c00000  s2 = fff00007e3c00018
s3 = fff00007e3c00000  s4 = fff00007fff59d80  s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000  a1 = fff00007e3c016e8  a2 = 0000000000000008
a3 = 0000000000000001  a4 = 8f5c28f5c28f5c29  a5 = ffffffff810f4338
t8 = 0000000000000275  t9 = ffffffff809b66f8  t10 = ff6769c5d964b800
t11= 000000000000b886  pv = ffffffff811bea20  at = 0000000000000000
gp = ffffffff81d89690  sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
 Code: ad3e0008  43f0074a  ad7e0018  ad9e0020  8c3001e8  40230101
 <88210000> 4821ed21
So force lockup work queue flush to fix this problem.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_device.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 58488eac84627..906547b229a9a 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1655,6 +1655,9 @@ int radeon_suspend_kms(struct drm_device *dev, bool suspend,
 		if (r) {
 			/* delay GPU reset to resume */
 			radeon_fence_driver_force_completion(rdev, i);
+		} else {
+			/* finish executing delayed work */
+			flush_delayed_work(&rdev->fence_drv[i].lockup_work);
 		}
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 4/8] parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

[Sasha Levin]

From: Li Qiong <liqiong@nfschina.com>

[ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ]

As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/parisc/ccio-dma.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 224a364097672..cc23b30337c16 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1416,15 +1416,17 @@ ccio_init_resource(struct resource *res, char *name, void __iomem *ioaddr)
 	}
 }
 
-static void __init ccio_init_resources(struct ioc *ioc)
+static int __init ccio_init_resources(struct ioc *ioc)
 {
 	struct resource *res = ioc->mmio_region;
 	char *name = kmalloc(14, GFP_KERNEL);
-
+	if (unlikely(!name))
+		return -ENOMEM;
 	snprintf(name, 14, "GSC Bus [%d/]", ioc->hw_path);
 
 	ccio_init_resource(res, name, &ioc->ioc_regs->io_io_low);
 	ccio_init_resource(res + 1, name, &ioc->ioc_regs->io_io_low_hv);
+	return 0;
 }
 
 static int new_ioc_area(struct resource *res, unsigned long size,
@@ -1578,7 +1580,10 @@ static int __init ccio_probe(struct parisc_device *dev)
 		return -ENOMEM;
 	}
 	ccio_ioc_init(ioc);
-	ccio_init_resources(ioc);
+	if (ccio_init_resources(ioc)) {
+		kfree(ioc);
+		return -ENOMEM;
+	}
 	hppa_dma_ops = &ccio_ops;
 	dev->dev.platform_data = kzalloc(sizeof(struct pci_hba_data), GFP_KERNEL);
 
-- 
2.35.1

[PATCH AUTOSEL 4.14 5/8] parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/head.S | 43 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 9b99eb0712ad1..2f570a5205866 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -22,7 +22,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	.level	PA_ASM_LEVEL
+	.level	1.1
 
 	__INITDATA
 ENTRY(boot_args)
@@ -69,6 +69,47 @@ $bss_loop:
 	stw,ma          %arg2,4(%r1)
 	stw,ma          %arg3,4(%r1)
 
+#if !defined(CONFIG_64BIT) && defined(CONFIG_PA20)
+	/* This 32-bit kernel was compiled for PA2.0 CPUs. Check current CPU
+	 * and halt kernel if we detect a PA1.x CPU. */
+	ldi		32,%r10
+	mtctl		%r10,%cr11
+	.level 2.0
+	mfctl,w		%cr11,%r10
+	.level 1.1
+	comib,<>,n	0,%r10,$cpu_ok
+
+	load32		PA(msg1),%arg0
+	ldi		msg1_end-msg1,%arg1
+$iodc_panic:
+	copy		%arg0, %r10
+	copy		%arg1, %r11
+	load32		PA(init_stack),%sp
+#define MEM_CONS 0x3A0
+	ldw		MEM_CONS+32(%r0),%arg0	// HPA
+	ldi		ENTRY_IO_COUT,%arg1
+	ldw		MEM_CONS+36(%r0),%arg2	// SPA
+	ldw		MEM_CONS+8(%r0),%arg3	// layers
+	load32		PA(__bss_start),%r1
+	stw		%r1,-52(%sp)		// arg4
+	stw		%r0,-56(%sp)		// arg5
+	stw		%r10,-60(%sp)		// arg6 = ptr to text
+	stw		%r11,-64(%sp)		// arg7 = len
+	stw		%r0,-68(%sp)		// arg8
+	load32		PA(.iodc_panic_ret), %rp
+	ldw		MEM_CONS+40(%r0),%r1	// ENTRY_IODC
+	bv,n		(%r1)
+.iodc_panic_ret:
+	b .				/* wait endless with ... */
+	or		%r10,%r10,%r10	/* qemu idle sleep */
+msg1:	.ascii "Can't boot kernel which was built for PA8x00 CPUs on this machine.\r\n"
+msg1_end:
+
+$cpu_ok:
+#endif
+
+	.level	PA_ASM_LEVEL
+
 	/* Initialize startup VM. Just map first 16/32 MB of memory */
 	load32		PA(swapper_pg_dir),%r4
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
-- 
2.35.1

[PATCH AUTOSEL 4.14 6/8] arm64/signal: Raise limit on stack frames

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 7ddcaf78e93c9282b4d92184f511b4d5bee75355 ]

The signal code has a limit of 64K on the size of a stack frame that it
will generate, if this limit is exceeded then a process will be killed if
it receives a signal. Unfortunately with the advent of SME this limit is
too small - the maximum possible size of the ZA register alone is 64K. This
is not an issue for practical systems at present but is easily seen using
virtual platforms.

Raise the limit to 256K, this is substantially more than could be used by
any current architecture extension.

Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220817182324.638214-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/signal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 43442b3a463f5..1b3973de417ec 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -97,7 +97,7 @@ static size_t sigframe_size(struct rt_sigframe_user_layout const *user)
  * not taken into account.  This limit is not a guarantee and is
  * NOT ABI.
  */
-#define SIGFRAME_MAXSZ SZ_64K
+#define SIGFRAME_MAXSZ SZ_256K
 
 static int __sigframe_alloc(struct rt_sigframe_user_layout *user,
 			    unsigned long *offset, size_t size, bool extend)
-- 
2.35.1

[PATCH AUTOSEL 4.14 7/8] fbdev: fb_pm2fb: Avoid potential divide by zero error

[Sasha Levin]

From: Letu Ren <fantasquex@gmail.com>

[ Upstream commit 19f953e7435644b81332dd632ba1b2d80b1e37af ]

In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.

divide error in pm2fb_check_var
Call Trace:
 <TASK>
 fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pm2fb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/video/fbdev/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index bd6c2f5f6095d..a5375b09415a6 100644
--- a/drivers/video/fbdev/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
@@ -614,6 +614,11 @@ static int pm2fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 		return -EINVAL;
 	}
 
+	if (!var->pixclock) {
+		DPRINTK("pixclock is zero\n");
+		return -EINVAL;
+	}
+
 	if (PICOS2KHZ(var->pixclock) > PM2_MAX_PIXCLOCK) {
 		DPRINTK("pixclock too high (%ldKHz)\n",
 			PICOS2KHZ(var->pixclock));
-- 
2.35.1

[PATCH AUTOSEL 4.14 8/8] fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ]

Add missing pci_disable_device() in error path in chipsfb_pci_init().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/chipsfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 413b465e69d8e..7ca149ab86d20 100644
--- a/drivers/video/fbdev/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
@@ -432,6 +432,7 @@ static int chipsfb_pci_init(struct pci_dev *dp, const struct pci_device_id *ent)
  err_release_fb:
 	framebuffer_release(p);
  err_disable:
+	pci_disable_device(dp);
  err_out:
 	return rc;
 }
-- 
2.35.1