From: Andrew Jones <ajones@ventanamicro.com>
To: linux-riscv@lists.infradead.org, kvm-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu, anup@brainfault.org,
mchitale@ventanamicro.com, heiko@sntech.de
Subject: [PATCH v2 2/4] riscv: Introduce support for defining instructions
Date: Wed, 31 Aug 2022 19:24:58 +0200 [thread overview]
Message-ID: <20220831172500.752195-3-ajones@ventanamicro.com> (raw)
In-Reply-To: <20220831172500.752195-1-ajones@ventanamicro.com>
When compiling with toolchains that haven't yet been taught about
new instructions we need to encode them ourselves. Create a new file
where support for instruction definitions will evolve. We initiate
the file with a macro called INSN_R(), which implements the R-type
instruction encoding. INSN_R() will use the assembler's .insn
directive when available, which should give the assembler a chance
to do some validation. When .insn is not available we fall back to
manual encoding.
Not only should using instruction encoding macros improve readability
and maintainability of code over the alternative of inserting
instructions directly (e.g. '.word 0xc0de'), but we should also gain
potential for more optimized code after compilation because the
compiler will have control over the input and output registers used.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
arch/riscv/Kconfig | 3 ++
arch/riscv/include/asm/insn-def.h | 86 +++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
create mode 100644 arch/riscv/include/asm/insn-def.h
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index ed66c31e4655..f8f3b316b838 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -227,6 +227,9 @@ config RISCV_DMA_NONCOHERENT
select ARCH_HAS_SETUP_DMA_OPS
select DMA_DIRECT_REMAP
+config AS_HAS_INSN
+ def_bool $(as-instr,.insn r 51$(comma) 0$(comma) 0$(comma) t0$(comma) t0$(comma) zero)
+
source "arch/riscv/Kconfig.socs"
source "arch/riscv/Kconfig.erratas"
diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
new file mode 100644
index 000000000000..2dcd1d4781bf
--- /dev/null
+++ b/arch/riscv/include/asm/insn-def.h
@@ -0,0 +1,86 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_INSN_DEF_H
+#define __ASM_INSN_DEF_H
+
+#include <asm/asm.h>
+
+#define INSN_R_FUNC7_SHIFT 25
+#define INSN_R_RS2_SHIFT 20
+#define INSN_R_RS1_SHIFT 15
+#define INSN_R_FUNC3_SHIFT 12
+#define INSN_R_RD_SHIFT 7
+#define INSN_R_OPCODE_SHIFT 0
+
+#ifdef __ASSEMBLY__
+
+#ifdef CONFIG_AS_HAS_INSN
+
+ .macro insn_r, opcode, func3, func7, rd, rs1, rs2
+ .insn r \opcode, \func3, \func7, \rd, \rs1, \rs2
+ .endm
+
+#else
+
+#include <asm/gpr-num.h>
+
+ .macro insn_r, opcode, func3, func7, rd, rs1, rs2
+ .4byte ((\opcode << INSN_R_OPCODE_SHIFT) | \
+ (\func3 << INSN_R_FUNC3_SHIFT) | \
+ (\func7 << INSN_R_FUNC7_SHIFT) | \
+ (.L__gpr_num_\rd << INSN_R_RD_SHIFT) | \
+ (.L__gpr_num_\rs1 << INSN_R_RS1_SHIFT) | \
+ (.L__gpr_num_\rs2 << INSN_R_RS2_SHIFT))
+ .endm
+
+#endif
+
+#define INSN_R(...) insn_r __VA_ARGS__
+
+#else /* ! __ASSEMBLY__ */
+
+#ifdef CONFIG_AS_HAS_INSN
+
+#define INSN_R(opcode, func3, func7, rd, rs1, rs2) \
+ ".insn r " opcode ", " func3 ", " func7 ", " rd ", " rs1 ", " rs2 "\n"
+
+#else
+
+#include <linux/stringify.h>
+#include <asm/gpr-num.h>
+
+#define DEFINE_INSN_R \
+ __DEFINE_ASM_GPR_NUMS \
+" .macro insn_r, opcode, func3, func7, rd, rs1, rs2\n" \
+" .4byte ((\\opcode << " __stringify(INSN_R_OPCODE_SHIFT) ") |" \
+" (\\func3 << " __stringify(INSN_R_FUNC3_SHIFT) ") |" \
+" (\\func7 << " __stringify(INSN_R_FUNC7_SHIFT) ") |" \
+" (.L__gpr_num_\\rd << " __stringify(INSN_R_RD_SHIFT) ") |" \
+" (.L__gpr_num_\\rs1 << " __stringify(INSN_R_RS1_SHIFT) ") |" \
+" (.L__gpr_num_\\rs2 << " __stringify(INSN_R_RS2_SHIFT) "))\n" \
+" .endm\n"
+
+#define UNDEFINE_INSN_R \
+" .purgem insn_r\n"
+
+#define INSN_R(opcode, func3, func7, rd, rs1, rs2) \
+ DEFINE_INSN_R \
+ "insn_r " opcode ", " func3 ", " func7 ", " rd ", " rs1 ", " rs2 "\n" \
+ UNDEFINE_INSN_R
+
+#endif
+
+#endif /* ! __ASSEMBLY__ */
+
+#define OPCODE(v) __ASM_STR(v)
+#define FUNC3(v) __ASM_STR(v)
+#define FUNC7(v) __ASM_STR(v)
+#define RD(v) __ASM_STR(v)
+#define RS1(v) __ASM_STR(v)
+#define RS2(v) __ASM_STR(v)
+#define __REG(v) __ASM_STR(x ## v)
+#define __RD(v) __REG(v)
+#define __RS1(v) __REG(v)
+#define __RS2(v) __REG(v)
+
+#endif /* __ASM_INSN_DEF_H */
--
2.37.2
next prev parent reply other threads:[~2022-08-31 17:25 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-31 17:24 [PATCH v2 0/4] riscv: Introduce support for defining instructions Andrew Jones
2022-08-31 17:24 ` [PATCH v2 1/4] riscv: Add X register names to gpr-nums Andrew Jones
2022-09-02 6:51 ` Anup Patel
2022-08-31 17:24 ` Andrew Jones [this message]
2022-09-02 6:52 ` [PATCH v2 2/4] riscv: Introduce support for defining instructions Anup Patel
2022-09-08 15:49 ` Heiko Stübner
2022-09-08 16:03 ` Anup Patel
2022-09-08 16:55 ` Andrew Jones
2022-09-08 16:54 ` Andrew Jones
2022-09-09 11:23 ` Anup Patel
2022-09-09 12:10 ` Heiko Stübner
2022-08-31 17:24 ` [PATCH v2 3/4] riscv: KVM: Apply insn-def to hfence encodings Andrew Jones
2022-09-02 6:52 ` Anup Patel
2022-08-31 17:25 ` [PATCH v2 4/4] riscv: KVM: Apply insn-def to hlv encodings Andrew Jones
2022-09-02 6:53 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220831172500.752195-3-ajones@ventanamicro.com \
--to=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=heiko@sntech.de \
--cc=kvm-riscv@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mchitale@ventanamicro.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox