From: Eliav Farber <farbere@amazon.com>
To: <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <rtanwar@maxlinear.com>,
<andriy.shevchenko@intel.com>, <linux-hwmon@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <farbere@amazon.com>, <hhhawa@amazon.com>, <jonnyc@amazon.com>
Subject: [PATCH v5 20/21] hwmon: (mr75203) add debugfs to read and write temperature coefficients
Date: Thu, 8 Sep 2022 15:24:48 +0000 [thread overview]
Message-ID: <20220908152449.35457-21-farbere@amazon.com> (raw)
In-Reply-To: <20220908152449.35457-1-farbere@amazon.com>
This change adds debugfs to read and write temperature sensor coefficients
- g, h, j and cal5.
The coefficients can vary between product and product, so it can be very
useful to be able to modify them on the fly during the calibration
process.
e.g.:
cat /sys/kernel/debug/940f23d0000.pvt/ts_coeff_cal5
4096
echo 83000 > sys/kernel/debug/940f23d0000.pvt/ts_coeff_g
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V5 -> V4:
- Return j coefficient to use debugfs_create_file() instead of
debugfs_create_u32() because j is signed.
V4 -> V3:
- Remove check of the debugfs_create_dir() return value.
- Use debugfs_create_u32() instead of debugfs_create_file().
- Return devm_add_action_or_reset() without checking return value and printing
an error message on failure.
drivers/hwmon/mr75203.c | 62 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 07668545c3ae..e6b49f810307 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -9,6 +9,7 @@
*/
#include <linux/bits.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/hwmon.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@@ -170,6 +171,7 @@ struct pvt_device {
struct regmap *v_map;
struct clk *clk;
struct reset_control *rst;
+ struct dentry *dbgfs_dir;
struct voltage_device *vd;
struct voltage_channels vm_channels;
struct temp_coeff ts_coeff;
@@ -179,6 +181,64 @@ struct pvt_device {
u32 ip_freq;
};
+static ssize_t pvt_ts_coeff_j_read(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ unsigned int len;
+ char buf[13];
+
+ len = scnprintf(buf, sizeof(buf), "%d\n", pvt->ts_coeff.j);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_j_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ int ret;
+
+ ret = kstrtos32_from_user(user_buf, count, 0, &pvt->ts_coeff.j);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static const struct file_operations pvt_ts_coeff_j_fops = {
+ .read = pvt_ts_coeff_j_read,
+ .write = pvt_ts_coeff_j_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static void devm_pvt_ts_dbgfs_remove(void *data)
+{
+ struct pvt_device *pvt = (struct pvt_device *)data;
+
+ debugfs_remove_recursive(pvt->dbgfs_dir);
+ pvt->dbgfs_dir = NULL;
+}
+
+static int pvt_ts_dbgfs_create(struct pvt_device *pvt, struct device *dev)
+{
+ pvt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
+
+ debugfs_create_u32("ts_coeff_h", 0644, pvt->dbgfs_dir,
+ &pvt->ts_coeff.h);
+ debugfs_create_u32("ts_coeff_g", 0644, pvt->dbgfs_dir,
+ &pvt->ts_coeff.g);
+ debugfs_create_u32("ts_coeff_cal5", 0644, pvt->dbgfs_dir,
+ &pvt->ts_coeff.cal5);
+ debugfs_create_file("ts_coeff_j", 0644, pvt->dbgfs_dir, pvt,
+ &pvt_ts_coeff_j_fops);
+
+ return devm_add_action_or_reset(dev, devm_pvt_ts_dbgfs_remove, pvt);
+}
+
static umode_t pvt_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
@@ -813,6 +873,8 @@ static int mr75203_probe(struct platform_device *pdev)
memset32(temp_config, HWMON_T_INPUT, ts_num);
pvt_temp.config = temp_config;
pvt_info[index++] = &pvt_temp;
+
+ pvt_ts_dbgfs_create(pvt, dev);
}
if (pd_num) {
--
2.37.1
next prev parent reply other threads:[~2022-09-08 15:26 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-08 15:24 [PATCH v5 00/21] Variety of fixes and new features for mr75203 driver Eliav Farber
2022-09-08 15:24 ` [PATCH v5 01/21] dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional Eliav Farber
2022-09-08 18:59 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 02/21] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined Eliav Farber
2022-09-08 15:24 ` [PATCH v5 03/21] hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors Eliav Farber
2022-09-08 15:24 ` [PATCH v5 04/21] hwmon: (mr75203) fix voltage equation for negative source input Eliav Farber
2022-09-08 15:24 ` [PATCH v5 05/21] hwmon: (mr75203) fix multi-channel voltage reading Eliav Farber
2022-09-08 15:24 ` [PATCH v5 06/21] hwmon: (mr75203) enable polling for all VM channels Eliav Farber
2022-09-08 15:24 ` [PATCH v5 07/21] dt-bindings: hwmon: (mr75203) add description for Moortec's PVT controller Eliav Farber
2022-09-09 2:16 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 08/21] dt-bindings: hwmon: (mr75203) change "resets" property to be optional Eliav Farber
2022-09-09 2:17 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 09/21] hwmon: (mr75203) skip reset-control deassert for SOCs that don't support it Eliav Farber
2022-09-09 2:18 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 10/21] dt-bindings: vendor-prefixes: add vendor prefix for Moortec Eliav Farber
2022-09-13 11:47 ` Rob Herring
2022-09-19 12:59 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 11/21] dt-bindings: hwmon: (mr75203) add "moortec,vm-active-channels" property Eliav Farber
2022-09-13 11:49 ` Rob Herring
2022-09-19 12:59 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 12/21] hwmon: (mr75203) add VM active channel support Eliav Farber
2022-09-19 13:00 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 13/21] dt-bindings: hwmon: (mr75203) add "moortec,vm-pre-scaler-x2" property Eliav Farber
2022-09-13 11:50 ` Rob Herring
2022-09-19 13:01 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 14/21] hwmon: (mr75203) add VM pre-scaler x2 support Eliav Farber
2022-09-19 13:10 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 15/21] hwmon: (mr75203) modify the temperature equation according to series 5 datasheet Eliav Farber
2022-09-19 13:11 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 16/21] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Eliav Farber
2022-09-08 19:02 ` Guenter Roeck
2022-09-08 20:18 ` [PATCH v5 16/21] dt-bindings: hwmon: (mr75203) add "moortec, ts-series" property Farber, Eliav
2022-09-08 20:22 ` Guenter Roeck
2022-09-13 11:57 ` [PATCH v5 16/21] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Rob Herring
2022-09-19 13:18 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 17/21] hwmon: (mr75203) add support for series 6 temperature equation Eliav Farber
2022-09-19 13:19 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 18/21] dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation Eliav Farber
2022-09-13 11:58 ` Rob Herring
2022-09-19 13:20 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 19/21] hwmon: (mr75203) parse temperature coefficients from device-tree Eliav Farber
2022-09-19 13:21 ` Guenter Roeck
2022-09-08 15:24 ` Eliav Farber [this message]
2022-09-08 18:11 ` [PATCH v5 20/21] hwmon: (mr75203) add debugfs to read and write temperature coefficients Andy Shevchenko
2022-09-13 13:06 ` Farber, Eliav
2022-09-13 14:40 ` Farber, Eliav
2022-09-13 17:01 ` Andy Shevchenko
2022-09-14 4:26 ` Farber, Eliav
2022-09-14 9:32 ` Andy Shevchenko
2022-09-14 14:03 ` Andy Shevchenko
2022-09-14 14:08 ` Andy Shevchenko
2022-09-15 9:17 ` Farber, Eliav
2022-09-19 13:22 ` Guenter Roeck
2022-09-08 15:24 ` [PATCH v5 21/21] hwmon: (mr75203) fix coding style space errors Eliav Farber
2022-09-19 13:23 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220908152449.35457-21-farbere@amazon.com \
--to=farbere@amazon.com \
--cc=andriy.shevchenko@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=hhhawa@amazon.com \
--cc=jdelvare@suse.com \
--cc=jonnyc@amazon.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=rtanwar@maxlinear.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox